Home |
Search |
Today's Posts |
#8
|
|||
|
|||
Honduras mahogany BS1088 ply?
"Brian D" wrote in message news:FSOcb.583041$o%2.266431@sccrnsc02...
Unclear ...which is better? If it's an outfit not mentioned here yet, how about if you share the info with us? Thx, Brian -- My boat project: http://www.advantagecomposites.com/tongass I have some Wisa brand here that is only a few months old and the outer skin is forming a check or two, I am saving it to bring back to the distributor. I have never seen that with the Joubert brand ply. Wisa, and another calling itself Eurocume seem to have all five skins made of the lighter colored wood (6mm) but the Joubert has a darker skin, one that blends in with the mahogany trim I use. The other finishes lighter in color, the Joubert gets a nice rich mahogany tone when finished.. I also notice the Joubert is a little lighter sheet for sheet than the other three brands I have tried... Scotty "Backyard Renegade" wrote in message m... "Jacques Mertens" wrote in message ... The Meranti BS1088 sold here is made by Joubert and looks very much like your description: http://plywood.e-boat.net/index.php -- Jacques http://www.bateau.com Yes, but you must watch out cause there are more than one manufacturer in Joubert France, but only one company called Joubert. The sticker on the wood is yellow and blue and says Joubert. This wood, generally sold as ocoume has the reddish wood for outside panels, many of the others don't. I am a happy camper today as I stumbled onto another supplier for the Joubert ocoume. There is a difference, a big difference. Scotty "Jim Conlin" wrote in message ... I need a few sheets of a good quality (BS1088 or 6566) 1/4" plywood with the appearance of Honduras mahogany. I've inquired of the usual suspects and not found it. Suggestions? Jim |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Genuine Mahogany sole..... | General | |||
Stain and caulking for mahogany runabout | Boat Building | |||
DixieCraft Mahogany (?) Advice wanted | Boat Building |