Epoxy or Poly resin? - BoatBanter.com

Ervin Charles

Posts: n/a

Epoxy or Poly resin?

Lloyd,
Gelcoat will stick to epoxy as long as you rough it up first. Plug the
hole with the plywood which has been primed with epoxy, epoxy it over and
let dry. Sand with 80 grit then 120 and apply gelcoat with peel-ply over it
(or saran wrap). This will make final sanding much easier.
MTCW...
Charles

Reply With Quote

Thread Tools	Search this Thread
Show Printable Version	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Posting Rules
Smilies are On [IMG] code is Off HTML code is Off Trackbacks are On Pingbacks are On Refbacks are On

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HDPE Poly water tank	Marc	General	4	February 17th 04 07:57 PM
epoxy does so pass water	William R. Watt	Boat Building	14	November 11th 03 12:52 PM
polyester - epoxy bonding	Walt	Boat Building	19	July 27th 03 06:37 PM
Canoe rebuilt with Epoxy	Dino &/or Susan	Boat Building	10	July 22nd 03 03:09 AM
Epoxy stanchions to deck??	[email protected]	General	0	July 16th 03 05:09 PM

All times are GMT +1. The time now is 03:31 PM.

Menu

About Us