Interesting...
Is stainless okay below the water line in fresh water?

Bronze is an alloy; does it act like millions of batteries in salt water
also?

I inherited a huge bag of "SS" hose clamps with the boat I purchased. Some
were obviously zinc screws, so I brought out a big magnet and separated all
of them. They fell into three categories:
1. Strong attraction to the magnet
2. Weak but noticeable attraction.
3. No attraction.

Categories 1 & 3 were about 1/4 each of the total bag, category 2 was about
half of them. I gave away all the 1s and 2s.

--


Keith
__
Practice safe eating - always use condiments.
"James" wrote in message
...

"Steve" wrote in message
...
I was removing some hose clamps from the hoses to my head. (minor leak).

. Hmm! did Uncle Sam get screwed
also??

Frustrated With rusting hose clamps.

Steve
s/v Good Intentions


Uncle Sam was most likly who demanded the manufacturers saved an extra
5cents on each clamp.. and as his order was for VAST quantity.. his spec
became the norm

John,
Generally, yes to the first question, but you still have to make certain
that water flows around the part and it should be 316, 316L or 316Ti.

Yes it can to the second question, but to a smaller degree. However, it will
raise hell with other metals attached to the same electrical plane and the
extent also depends on the bronze alloy.
Steve

"John Smith" wrote in message
...
Interesting...
Is stainless okay below the water line in fresh water?

Bronze is an alloy; does it act like millions of batteries in salt water
also?