Here's what we put on my hull after a peel job:
After peeling and drying the hull, here is what we applied:

3 sessions of 1.5 oz. fiberglass mat with vinylester resin
2 coats Interprotect 1000 - barrier coat
2 coats Interprotect 2000 - barrier coat
1 heavy sweep VC Watertight epoxy putty
3 coats Interprotect 2000 - barrier coat
2 coats antifouling - Petit Trinidad SR (4 gallons).

--


Keith
__
Just be glad we don't get all the government we paid for.
"Glenn Ashmore" wrote in message
...
Epoxy will bond to the esters acceptably but esters don't bond to
epoxies very well. Esters stick to each other well if not totally cured
but new esters don't bond to old esters as well as epoxies do.

Kenneth wrote:
Howdy,

Vinylester, polyester, and epoxy...

Which bond to which?

Sincere thanks,



--
Glenn Ashmore

I'm building a 45' cutter in strip/composite. Watch my progress (or lack
there of) at: http://www.rutuonline.com
Shameless Commercial Division: http://www.spade-anchor-us.com