Home |
Search |
Today's Posts |
#2
|
|||
|
|||
Bateau Cheap Canoe....?
From what I've read (no real experience), pirogues (which this boat
falls under IMO) are relatively tippy. As long as you stay low in the boat, you should be ok. Personally, from looking at the design, I'd add an oak 1x1 keel down the center. Maybe Jacques will chime in... Ed James W. Sloan wrote: Group, I've found a couple of creeks I want to explore and I've decided to put together the Bateau "Cheap Canoe". I don't expect much given that the plans are free and the materials minimal. Anyone built one to these plans? Any changes I should make? Is this a stable canoe (13' x 30") or is it tender/tippy? Should I add a small keel? I'll likely use Luan and epoxy/glass ( I have enough left over from other projects to go with the "cheap" theme!). Thanks in advance, James |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
FS: some cheap boats in Ontario, Canada | General | |||
FS: some cheap boats in Ontario, Canada | General | |||
Cheap AGM Batteries in Charlotte NC | General | |||
sea nymph canoe | General | |||
Double canoe wooden pontoon boat??? | Boat Building |