Glenn Ashmore wrote:
Do not paint before glassing.

I think he was referring to doing a sealer coat of epoxy on the plywood
prior to glassing. Your instructions indicate that you're assuming that
he has done a sealer coat. I wouldn't want him to wash bare plywood with
water and amonia. ;-)

"Brian Nystrom" wrote in message
...
Glenn Ashmore wrote:
Do not paint before glassing.

I think he was referring to doing a sealer coat of epoxy on the plywood
prior to glassing. Your instructions indicate that you're assuming that he
has done a sealer coat. I wouldn't want him to wash bare plywood with
water and amonia. ;-)

Good point. :-) To me paint is paint and epoxy is epoxy. (But that does
not include "epoxy" paints.)

--
Glenn Ashmore

I'm building a 45' cutter in strip/composite. Watch my progress (or lack
there of) at: http://www.rutuonline.com
Shameless Commercial Division: http://www.spade-anchor-us.com