LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #12   Report Post  
Roger Derby
 
Posts: n/a
Default

From the sign on the wall of a Program Office somewhe "In every project,
there comes a time to shoot the designer and go into production."

I'd suggest a slightly different approach. Find out what type of boat is
being sailed locally and buy a used one. The opportunity to race (or cruise
as a group which is the same thing) will improve your sailing immensely and
treble your fun.

The Yahoo Bolger group has discussed the slapping issue (to death) and there
is a fix.

Roger

http://derbyrm.mystarband.net/default.htm

wrote in message
oups.com...
I'm in the process of trying to decide what to build next.
Requirements:
Sail: Would prefer an unstayed mast, or a mast with simple
standing rigging. Gaff or Bermuda. Ketch/Yawl acceptable.
Length: 14-16 ft LOA, would like pretty close to that on the
waterline.
Beam: 5 ft-ish
Draught: 18-24" to keel or retracted centerboard
Displacement: 1400 lb range at DWL - closer to 1000 lb
lightweight for towing
Simple cabin: sitting room with space for a little table or like /
sleeping bag or bunk
Cockpit: sized for 2 adults (3 if cozy)
Usage: large inland lakes / waterways / stays up to 2-3 days.
What I've found so far:
Bolger Micro - I've been looking at these for years... aside from
the looks - I don't like the free flooding end sections, and I don't
like the completely flat aspects. *slap* *slap*

Weekender - nicer looking boat - but doesn't seem as seaworthy
as the micro.

Macnaughton Farthing - A little heavy and a little too much draught.
I also don't like the bubble and internal cockpit. I very much like the
general hull profile.

Macnaughton Silver Gull 19 - two to three feet too long. Just a tad
too big... now if there was a 16 ft blend of this and the farthing...

Bateau AD14 - right qualities, but the design doesn't fit my fancy.

Dix Cape Cutter 19 - nice looking boat once again, but a smidge too
long.

Given my rough requirements and comments on these other designs - can
anyone recommend a design or designer that I missed? I'm considering
shifting my window up a few feet to include the 18/19 ft range. Seems
to expand my possibilities a bit.

Thanks!




 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Building a small sailboat...help Randall Boat Building 9 March 15th 04 05:12 PM
Thinking of building your first boat? Backyard Renegade Boat Building 0 January 26th 04 04:56 PM
I'm building my first Trimaran... Zyana ~ Beu Ribe Boat Building 8 January 6th 04 02:40 AM
Repost - this is so good it deserves to be read more than once Simple Simon ASA 12 October 20th 03 10:33 PM
Anyone Building an Aluminum Sailboat? Aluminumhullsailor Boat Building 1 September 12th 03 09:40 AM


All times are GMT +1. The time now is 04:44 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017