Home |
Search |
Today's Posts |
#4
![]() |
|||
|
|||
![]()
"Remco" wrote in message
oups.com... If you are going to put this foam in something else, I wonder if that expanding "Great Stuff" spray foam would be of help. (home depot, lowes, etc). If, for instance, you were thinking of putting your sheet in a hold or something, you could spray this expandable foam instead. I don't know if it 'likes' to be wet and turns to a sponge - but that you could easily test for. Regards, Remco No, it doesn't (help/work well). Froth-Pak by Dow, or Fomo Hand-Foam, by Fomo is closed cell and far cheaper for the volume needed. GS is open cell and will absorb moisture readily, and be very expensive for any but crack sealing. I just went through this for my boat (not for floatation, but for insulation, but the principle's the same). From my notes: froth pak 888-868-1183 option 2 local guy rep sez ok careful about expansion http://www.dow.com/pusystems/product/fpport.htm will help you calculate volume needs fomo.com spray in, $42 for 2cf (where to buy?) 1 330.753.4585, home office I wound up going with Fomo as it was available in larger (2CF rather than only 1CF) small sizes, and cheaper, too. L8R Skip -- Morgan 461 #2 SV Flying Pig http://tinyurl.com/384p2 "Twenty years from now you will be more disappointed by the things you didn't do than by the ones you did do. So throw off the bowlines. Sail away from the safe harbor. Catch the trade winds in your sails. Explore. Dream. Discover." - Mark Twain |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
2 part floatation foam | General | |||
Flotation | Whitewater | |||
Foam Block To Bass Boat... can this be done? | Boat Building | |||
Foam backrest | Touring | |||
Livingston Flotation Foam-filled? | Boat Building |