Home |
Search |
Today's Posts |
|
#1
![]()
posted to rec.boats.building
|
|||
|
|||
![]()
Thanks for the Tips guys. The boat has normal household plywood and 2x2 for
frame. It'll be for occaisional use. non-marine or non-treated. Actually the wife has never been on a boat and has a fear of something, this is a good way to educate her or face her fears. She's watching it get built. IF she likes this one and overcomes her fears, then we'll get a "real" boat next year. |
#3
![]()
posted to rec.boats.building
|
|||
|
|||
![]() "I am Tosk" wrote in message ... In article , says... Thanks for the Tips guys. The boat has normal household plywood and 2x2 for frame. It'll be for occaisional use. non-marine or non-treated. Actually the wife has never been on a boat and has a fear of something, this is a good way to educate her or face her fears. She's watching it get built. IF she likes this one and overcomes her fears, then we'll get a "real" boat next year. All the more reason to use paint and primer as opposed to expensive resin. Some here will howl but I never spend more than 20 bucks to paint a plywood skiff. I go to Home Depot and look for some nice beige or tan for the inside, something flat that won't reflect or collect heat, and something nice and shiny green or similar for the outside. I start at the "goof" table where there is usually a nice selection of colors for practically no $$. I am not going to spend a hundred bucks a year to paint a boat that cost me 100 to build. I painted my house green on green several years back, guess what color my next skiff was? ![]() If the boat is made of better wood I will use better stuff, I have probably used more Petit than any other for higher end stuff. "Marine" paints are easier to use, look nicer when cured, etc, but just not for a boat made of exterior ply. Again, just my opinion. Scotty -- Save the Ta'ta's!... http://tinyurl.com/ygqxs5v Oh, I agree. cheaper the better! LOL! I don't expect the home made boat to last 2 seasons anyways. so far I have about $200 in supplies in it so far. |
#4
![]()
posted to rec.boats.building
|
|||
|
|||
![]()
On Thu, 15 Apr 2010 15:32:34 -0400, I am Tosk
wrote: In article , says... Thanks for the Tips guys. The boat has normal household plywood and 2x2 for frame. It'll be for occaisional use. non-marine or non-treated. Actually the wife has never been on a boat and has a fear of something, this is a good way to educate her or face her fears. She's watching it get built. IF she likes this one and overcomes her fears, then we'll get a "real" boat next year. All the more reason to use paint and primer as opposed to expensive resin. Some here will howl but I never spend more than 20 bucks to paint a plywood skiff. I go to Home Depot and look for some nice beige or tan for the inside, something flat that won't reflect or collect heat, and something nice and shiny green or similar for the outside. I start at the "goof" table where there is usually a nice selection of colors for practically no $$. I am not going to spend a hundred bucks a year to paint a boat that cost me 100 to build. I painted my house green on green several years back, guess what color my next skiff was? ![]() If the boat is made of better wood I will use better stuff, I have probably used more Petit than any other for higher end stuff. "Marine" paints are easier to use, look nicer when cured, etc, but just not for a boat made of exterior ply. Again, just my opinion. Scotty Different strokes for different folks :-) I use two part polyurethane paint because the paint will last the life of the dinghy. Barn paint gets sort of scruffy after a year or so. Cheers, Bruce (bruceinbangkokatgmaildotcom) |
#5
![]()
posted to rec.boats.building
|
|||
|
|||
![]()
On Thu, 15 Apr 2010 07:32:48 -0500, "Dave"
wrote: Thanks for the Tips guys. The boat has normal household plywood and 2x2 for frame. It'll be for occaisional use. non-marine or non-treated. Actually the wife has never been on a boat and has a fear of something, this is a good way to educate her or face her fears. She's watching it get built. IF she likes this one and overcomes her fears, then we'll get a "real" boat next year. If you built it from interior grade plywood it is not going to last a long time however you certainly should get some use out of the boat, and if this is the first boat that you have built you will probably begin to find fault with it after a while and start to think about "the next boat". It can become an obsession - to build the perfect boat :-) Cheers, Bruce (bruceinbangkokatgmaildotcom) |
#6
![]()
posted to rec.boats.building
|
|||
|
|||
![]()
"the next boat". It can become an obsession - to build the perfect
boat :-) Cheers, Bruce OH NO! Not that! LOL! I expect to get a couple of seasons out of this homebuilt. nothing more... The wife already named thins little dingy craft "NsaniT" |
#7
![]()
posted to rec.boats.building
|
|||
|
|||
![]()
On Thu, 15 Apr 2010 20:17:12 -0500, "Dave"
wrote: "the next boat". It can become an obsession - to build the perfect boat :-) Cheers, Bruce OH NO! Not that! LOL! I expect to get a couple of seasons out of this homebuilt. nothing more... The wife already named thins little dingy craft "NsaniT" Yes, probably get a good few years out of it, but it sure is hard to row and seems to be a bit low in the water with the Missus aboard and it might be nice to have a sail, and we could take the kids if it were just a little bigger, and hey! an outboard would be nice for longer trips, and if it had a top we wouldn't get rained on and damn, that barn paint is scruffy, sure needs a paint job..... :-) Cheers, Bruce (bruceinbangkokatgmaildotcom) |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Paint | Cruising | |||
Paint | General | |||
Bottom Paint ,,, 20 layers of Bottom Paint ,,, how to remove it. | Cruising | |||
Antifouling paint reacts with gloss paint. ARGHH! | Boat Building | |||
What paint to use | Boat Building |