Home |
Search |
Today's Posts |
#14
![]()
posted to alt.sailing.asa
|
|||
|
|||
![]()
Or you going to address the copper pipe to galvenized hook up next
to your shaft? I really don't need to. It's a sealed off intake for the AC, which was originally on the platform (not ready for a small genset) in the starboard locker. It's basically just hanging there, but the filter assembly probably stinks and I've been a coward about pulling it all. It's not hurting anything. And you should pick up that stray chunk of steel thats making a mess with rust stains in your bildge. That photo was taken just a few days ago. The engine bay is actually pretty clean, but we took on a lot of water through the compromised dripless seal and all of the dirt settled back there when she was pumped out. Look at the tranny and you can see it's pearly white. Also you should use two hose clamps on your hoses. Is there a reason why you or the builder elected to use only one? All of the hoses and fittings are new. There is not room for two clamps on many of them. Many folks put two on anyway, and have one doing nothing. Why? We have quite a few surveyors come into our yard. They all laugh at the two clamp idea when it comes to fittings that don't have room for them. Hose clamps should be changed every couple of seasons and there won't be a problem. Have a look at the pic: http://i128.photobucket.com/albums/p...rit/flange.jpg The only place where there's room for two clamps is at the top of the pump housing. There ARE two clamps for that, but note that the pump base is not connected. They had just removed it to gain better access and also because I'm getting an injector job and filter change. It's hillarious to me that poor Martin sees some dirt, but somehow misses that the fuel pump is hanging in mid air!!!! When the job is done I'll post a short video to show that the pic is indeed of a 35s5 (Martin says it's not) and that the engine and bed area are very clean. You won't be able to see the pump assembly though because it's going to be remounted. I''ll even show the original AC location with the dead-end fitting. I always back up what I say with clear pics and video. RB 35s5 NY |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Did You Pick the Wrong Boat? | ASA | |||
Battery Hook up wrong | General | |||
Usage of motoroil | General |