Wrong Again, Martin
 

Martin, I know over the years you'd hoped and dreamed I toss some of
my firepower in your direction, so here's yet another bloody nose for
you:

http://i128.photobucket.com/albums/p...rit/flange.jpg

That's my bent shaft, a few minutes from being yanked (just waiting to
remove the drippless). Bits of drivesaver are removed and the whole
thing is forward due to the wrestling match they had getting the prop
off. My new Martec is on the way.

As usual I back up what I say with clear pics. Maybe Crantz can claim
it's a fake for you! You need something to cling to.


RB
35s5
NY

Wrong Again, Martin
 

"Capt. Rob" wrote in message
ups.com...
Martin, I know over the years you'd hoped and dreamed I toss some of
my firepower in your direction, so here's yet another bloody nose for
you:

http://i128.photobucket.com/albums/p...rit/flange.jpg

That's my bent shaft, a few minutes from being yanked (just waiting to
remove the drippless). Bits of drivesaver are removed and the whole
thing is forward due to the wrestling match they had getting the prop
off. My new Martec is on the way.

As usual I back up what I say with clear pics. Maybe Crantz can claim
it's a fake for you! You need something to cling to.


RB
35s5
NY


I note that your gearbox has a sign reading 'oil not filled'. That tells us
something...

Wrong Again, Martin
 

Is that a galvanized pipe fitting I see? And what's that
hose attached to it? And where's the 2 hose clamps?

SBV

"Edgar" wrote in message
...

"Capt. **** Head Bob" wrote in message

ups.com...



http://i128.photobucket.com/albums/p...rit/flange.jpg



RB
35s5
NY


I note that your gearbox has a sign reading 'oil not
filled'. That tells us
something...

Wrong Again, Martin
 

On Jul 14, 9:08 am, "Scotty" wrote:
Is that a galvanized pipe fitting I see? And what's that
hose attached to it? And where's the 2 hose clamps?

SBV


Not only that the place is filthy! Thats got to be the worst
(weakest) sloppiest shaft tube and strut in history. And whats with
all the running rust stains?

Joe

Wrong Again, Martin
 

On Jul 14, 9:08 am, "Scotty" wrote:
Is that a galvanized pipe fitting I see?


Holy Electrolysis Scotty..He combined copper and galvenized coated
steel...why I bet he can get 8 volts out of that set-up...surprised
sparks are not flying off it.


And what's that
hose attached to it? And where's the 2 hose clamps?

Basic boat 101...use two hose clamps on everything...Sharp eye
Scotty. Why I bet his warp drive pitted and corroded in half so fast
because he only used half the bolts required.

Joe

SBV

"Edgar" wrote in message

...

"Capt. **** Head Bob" wrote in message

ups.com...



http://i128.photobucket.com/albums/p...rit/flange.jpg

RB
35s5
NY

I note that your gearbox has a sign reading 'oil not

filled'. That tells us



something...- Hide quoted text -

- Show quoted text -

Wrong Again, Martin
 

"Capt. Rob" wrote:

Martin, I know over the years you'd hoped and dreamed I toss some of
my firepower in your direction, so here's yet another bloody nose for
you:

http://i128.photobucket.com/albums/p...rit/flange.jpg

That's my bent shaft, a few minutes from being yanked (just waiting to
remove the drippless). Bits of drivesaver are removed and the whole
thing is forward due to the wrestling match they had getting the prop
off. My new Martec is on the way.

As usual I back up what I say with clear pics. Maybe Crantz can claim
it's a fake for you! You need something to cling to.

a! Ha! What did your surveyor say about Bennateau using galvanized
plumbing fittings? The picture is no doubt genuine, but it's not a picture

of the transmission/drive train of a modern Benny. Maybe you could post
your pictures of thimbles and shackles again!

Cheers
Marty

Wrong Again, Martin
 

What did your surveyor say about Bennateau using galvanized
plumbing fittings? The picture is no doubt genuine, but it's not a
picture

of the transmission/drive train of a modern Benny.



So once again, Martin, so the whole group knows....you're claim is
that the photo is not from my 1990 Beneteau 35s5 first series?
BTW, those fittings are painted.


RB
35s5
NY

Wrong Again, Martin
 

"Capt. Rob" wrote:

What did your surveyor say about Bennateau using galvanized
plumbing fittings? The picture is no doubt genuine, but it's not a
picture

of the transmission/drive train of a modern Benny.

So once again, Martin, so the whole group knows....you're claim is
that the photo is not from my 1990 Beneteau 35s5 first series?
BTW, those fittings are painted.

Sure as shooting not the one you said surveyed "like new", "above
average", "pristeen", etc.

Painted! Ha! Ha!, Keep digging you're heading for China on this one,
give it up and admit to yet another lie. Have you an ounce of self
esteem left?

Cheers
Marty

Wrong Again, Martin
 

Sure as shooting not the one you said surveyed "like new", "above
average", "pristeen", etc.

Painted! Ha! Ha!, Keep digging you're heading for China on this one,
give it up and admit to yet another lie. Have you an ounce of self
esteem left?



And AGAIN, Martin, your claim is that the pic if not of my 35s5 from
1990, right? You DID say it's not from a Benny, right?
Just let me know when you'll either actually stand by what you say or
backpedal again.
My guess is that you'll evade this query yet again.


RB
35s5
NY

Wrong Again, Martin
 

Sure as shooting not the one you said surveyed "like new", "above
average", "pristeen", etc.




Yup, and If I remember I even had a pic of the survey page up for a
while.
You did say that it's NOT a pic from my 35s5, right? Or a Benny at
all?


RB
35s5
NY