LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
posted to alt.sailing.asa
Joe Joe is offline
external usenet poster
 
First recorded activity by BoatBanter: Jul 2006
Posts: 3,698
Default Yanmar engine oil


Scotty wrote:
Right you are Edgar. Do you know what Delo 100 is?

Scotty


I use Royal Purple. It's good stuff.

Joe


"Edgar" wrote in message
...
" Any oil is better than no oil but the right oil is

better still..."

"Scotty" wrote in message
...
I have a 2GM20F, use Delo 100, 15-40 wt.. Because I

have a
55 gal drum at home.

Scotty


"Scout" wrote in message
...
Anyone using synthetic motor oil? API of CD, CE, higher?

Can
you use a C*-4?
Anyone else have a 2GM20F engine?

TIA

Scout






  #2   Report Post  
posted to alt.sailing.asa
external usenet poster
 
First recorded activity by BoatBanter: Jul 2006
Posts: 519
Default Yanmar engine oil

Scotty or Jeff,
Do you have an oil filter part number? Fram or whatever.

I just ran 3 gallons of anti-freeze through the sea-water side and collected
it in a bucket, poured it back into the 3 jugs and put it away for next
year's winterizing.

Scout


"Scotty" wrote in message
...
I have a 2GM20F, use Delo 100, 15-40 wt.. Because I have a
55 gal drum at home.

Scotty


"Scout" wrote in message
...
Anyone using synthetic motor oil? API of CD, CE, higher? Can
you use a C*-4?
Anyone else have a 2GM20F engine?

TIA

Scout





  #3   Report Post  
posted to alt.sailing.asa
external usenet poster
 
First recorded activity by BoatBanter: Jul 2006
Posts: 1,301
Default Yanmar engine oil

Scout wrote:
Scotty or Jeff,
Do you have an oil filter part number? Fram or whatever.


When I bought the boat there was a site that claimed that most of the
third party filters were worthless. When this was verified by my most
frugal boating buddy, I bought a bushel of authentic Yanmar filters
and I'm still going through them.

If you want a Fram, I'm sure West has the chart.

I just ran 3 gallons of anti-freeze through the sea-water side and collected
it in a bucket, poured it back into the 3 jugs and put it away for next
year's winterizing.


So now you have some antifreeze that's been diluted an arbitrary
amount. I usually suck up about a gallon, then open the valve on the
Vetus waterlock muffler. I usually remove the water pump and
sometimes the exhaust elbow.

  #4   Report Post  
posted to alt.sailing.asa
external usenet poster
 
First recorded activity by BoatBanter: Jul 2006
Posts: 2,070
Default Yanmar engine oil


"Jeff" wrote in message
...
Scout wrote:
Scotty or Jeff,
Do you have an oil filter part number? Fram or whatever.


When I bought the boat there was a site that claimed that

most of the
third party filters were worthless. When this was

verified by my most
frugal boating buddy, I bought a bushel of authentic

Yanmar filters
and I'm still going through them.

If you want a Fram, I'm sure West has the chart.

I just ran 3 gallons of anti-freeze through the

sea-water side and collected
it in a bucket, poured it back into the 3 jugs and put

it away for next
year's winterizing.


So now you have some antifreeze that's been diluted an

arbitrary
amount. I usually suck up about a gallon, then open the

valve on the
Vetus waterlock muffler. I usually remove the water pump

and
sometimes the exhaust elbow.



Oh, yeah, I always take the rubber impeller out of the pump
for Winter layover.

SBV


  #5   Report Post  
posted to alt.sailing.asa
external usenet poster
 
First recorded activity by BoatBanter: Jul 2006
Posts: 519
Default Yanmar engine oil

"Scotty" wrote in message
. ..

"Jeff" wrote in message
...
Scout wrote:
Scotty or Jeff,
Do you have an oil filter part number? Fram or whatever.


When I bought the boat there was a site that claimed that

most of the
third party filters were worthless. When this was

verified by my most
frugal boating buddy, I bought a bushel of authentic

Yanmar filters
and I'm still going through them.

If you want a Fram, I'm sure West has the chart.

I just ran 3 gallons of anti-freeze through the

sea-water side and collected
it in a bucket, poured it back into the 3 jugs and put

it away for next
year's winterizing.


So now you have some antifreeze that's been diluted an

arbitrary
amount. I usually suck up about a gallon, then open the

valve on the
Vetus waterlock muffler. I usually remove the water pump

and
sometimes the exhaust elbow.



Oh, yeah, I always take the rubber impeller out of the pump
for Winter layover.


Why do you do that? Does it deteriorate if left in?





  #6   Report Post  
posted to alt.sailing.asa
external usenet poster
 
First recorded activity by BoatBanter: Jul 2006
Posts: 519
Default Yanmar engine oil

Thanks Jeff,
I prefer specified parts, but I just haven't seen a part number nor do I
know where to buy the Yanmar filters. I didn't get the full documentation
with the boat either, so tracking down procedures, diagrams, and part
numbers has been iffy. I wrote down the numbers for the anti-freeze and the
oil, went shopping at all the local auto stores, including Pep Boys, and
found none of the recommended fluids and had no clue what oil filter to buy.
It's the next level of effort to get to a marine store, which I'll do, but
for now I just wanted to get fresh oil(s) and anti-freeze onboard so I can
get the rest of my mountain of work done without worrying about the coming
freeze.

Thanks for the link. I don't know why, but when I Googled Yanmar and 2GM20F
I got nothing.

Scotty, I plan to order some oil filters from Yanmar. Do you want to split
an order?

Scout



"Jeff" wrote in message
...
Scout wrote:
Scotty or Jeff,
Do you have an oil filter part number? Fram or whatever.


When I bought the boat there was a site that claimed that most of the
third party filters were worthless. When this was verified by my most
frugal boating buddy, I bought a bushel of authentic Yanmar filters and
I'm still going through them.

If you want a Fram, I'm sure West has the chart.

I just ran 3 gallons of anti-freeze through the sea-water side and
collected it in a bucket, poured it back into the 3 jugs and put it away
for next year's winterizing.


So now you have some antifreeze that's been diluted an arbitrary amount.
I usually suck up about a gallon, then open the valve on the Vetus
waterlock muffler. I usually remove the water pump and sometimes the
exhaust elbow.



  #7   Report Post  
posted to alt.sailing.asa
external usenet poster
 
First recorded activity by BoatBanter: Jul 2006
Posts: 2,070
Default Yanmar engine oil

I'll stick with the Fram and Delo oil.
Where are you ordering from? The shop at my marina matches
WM / BoatUS prices and he had the Yanmar fuel filters in
stock ( $6 a piece ) . He may have oil filters, or at least
can get them the next day. You want me to call him and get a
price? I'll be down there most of this week.

BTW, you should get a spare fuel filter, or two. I did.

Scotty











"Scout" wrote in message
...
Thanks Jeff,
I prefer specified parts, but I just haven't seen a part

number nor do I
know where to buy the Yanmar filters. I didn't get the

full documentation
with the boat either, so tracking down procedures,

diagrams, and part
numbers has been iffy. I wrote down the numbers for the

anti-freeze and the
oil, went shopping at all the local auto stores, including

Pep Boys, and
found none of the recommended fluids and had no clue what

oil filter to buy.
It's the next level of effort to get to a marine store,

which I'll do, but
for now I just wanted to get fresh oil(s) and anti-freeze

onboard so I can
get the rest of my mountain of work done without worrying

about the coming
freeze.

Thanks for the link. I don't know why, but when I Googled

Yanmar and 2GM20F
I got nothing.

Scotty, I plan to order some oil filters from Yanmar. Do

you want to split
an order?

Scout



"Jeff" wrote in message
...
Scout wrote:
Scotty or Jeff,
Do you have an oil filter part number? Fram or

whatever.

When I bought the boat there was a site that claimed

that most of the
third party filters were worthless. When this was

verified by my most
frugal boating buddy, I bought a bushel of authentic

Yanmar filters and
I'm still going through them.

If you want a Fram, I'm sure West has the chart.

I just ran 3 gallons of anti-freeze through the

sea-water side and
collected it in a bucket, poured it back into the 3

jugs and put it away
for next year's winterizing.


So now you have some antifreeze that's been diluted an

arbitrary amount.
I usually suck up about a gallon, then open the valve on

the Vetus
waterlock muffler. I usually remove the water pump and

sometimes the
exhaust elbow.





  #8   Report Post  
posted to alt.sailing.asa
external usenet poster
 
First recorded activity by BoatBanter: Oct 2006
Posts: 11
Default Yanmar engine oil


"Scout" wrote:
Thanks Jeff,
I prefer specified parts, but I just haven't seen a part number nor do I
know where to buy the Yanmar filters. Thanks for the link. I don't know
why, but when I Googled Yanmar and 2GM20F I got nothing.


http://shop.torresen.com/ships_store...u=119660-35150

Special Note About This Part:
This part number is no longer available.
Click here for the alternative part number, Yanmar 119305-35151

Since that is in HTML, it will most likely be stripped by my ISP.

Try this:
http://shop.torresen.com/ships_store...151&sectionid=

The oil filter you want is no longer available and has been replaced.

Click on this link and find your engine:
http://www.marinedieseldirect.com/catalogs/

Click on your engine for a wealth of info...




Scotty, I plan to order some oil filters from Yanmar. Do you want to split
an order?

Scout



"Jeff" wrote in message
...
Scout wrote:
Scotty or Jeff,
Do you have an oil filter part number? Fram or whatever.


When I bought the boat there was a site that claimed that most of the
third party filters were worthless. When this was verified by my most
frugal boating buddy, I bought a bushel of authentic Yanmar filters and
I'm still going through them.

If you want a Fram, I'm sure West has the chart.

I just ran 3 gallons of anti-freeze through the sea-water side and
collected it in a bucket, poured it back into the 3 jugs and put it away
for next year's winterizing.


So now you have some antifreeze that's been diluted an arbitrary amount.
I usually suck up about a gallon, then open the valve on the Vetus
waterlock muffler. I usually remove the water pump and sometimes the
exhaust elbow.





  #9   Report Post  
posted to alt.sailing.asa
external usenet poster
 
First recorded activity by BoatBanter: Jul 2006
Posts: 519
Default Yanmar engine oil


"Jeff" wrote in message
...
Scout wrote:
Scotty or Jeff,
Do you have an oil filter part number? Fram or whatever.


When I bought the boat there was a site that claimed that most of the
third party filters were worthless. When this was verified by my most
frugal boating buddy, I bought a bushel of authentic Yanmar filters and
I'm still going through them.

If you want a Fram, I'm sure West has the chart.

I just ran 3 gallons of anti-freeze through the sea-water side and
collected it in a bucket, poured it back into the 3 jugs and put it away
for next year's winterizing.


So now you have some antifreeze that's been diluted an arbitrary amount.
I usually suck up about a gallon, then open the valve on the Vetus
waterlock muffler. I usually remove the water pump and sometimes the
exhaust elbow.


That is true, but I did test the mixture with a hydrometer. Seems a shame to
dump it.
Scout


  #10   Report Post  
posted to alt.sailing.asa
external usenet poster
 
First recorded activity by BoatBanter: Jul 2006
Posts: 2,070
Default Yanmar engine oil

I thought I had written the # in my manual, but I don't see
it ( the # ). I have a spare filter but it's on the boat.

Scotty


"Scout" wrote in message
. ..
Scotty or Jeff,
Do you have an oil filter part number? Fram or whatever.

I just ran 3 gallons of anti-freeze through the sea-water

side and collected
it in a bucket, poured it back into the 3 jugs and put it

away for next
year's winterizing.

Scout


"Scotty" wrote in message
...
I have a 2GM20F, use Delo 100, 15-40 wt.. Because I have

a
55 gal drum at home.

Scotty


"Scout" wrote in message
...
Anyone using synthetic motor oil? API of CD, CE, higher?

Can
you use a C*-4?
Anyone else have a 2GM20F engine?

TIA

Scout









 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Yanmar water pump with metal impeller... Help with ....which engine? [email protected] Cruising 1 October 5th 06 10:09 AM
Yanmar advice needed Don W Cruising 17 May 21st 06 06:20 AM
Engine coupler Proxy General 14 July 17th 05 06:13 AM
Loss pf Power problem with Yanmar Engine Jerry Poore General 3 June 26th 04 01:42 AM
power vs sail O:P\) Cruising 36 March 18th 04 02:27 AM


All times are GMT +1. The time now is 01:13 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017