LinkBack Thread Tools Search this Thread Display Modes
  #11   Report Post  
Jonathan Ganz
 
Posts: n/a
Default Jim Cate visits RedCloud

Nothing wrong with a little rust... keeps West Marine profitable.

--
"j" ganz @@
www.sailnow.com

"Joe" wrote in message
om...
"Jonathan Ganz" wrote in message

...
Not so sharp that he would run not walk away from a MacXipad.
But, I believe you when you say you don't have rust on your boat.



Well I must admit at the 8th frame above deck under the cap rail I
found a 1/2"X 1/4" spot of rust this week. I will get out the needle
gun, wire wheel, endsallrust, metcoat primer and epoxy top coat and
stop it as soon as we have weather that will permit me to do a proper
job,need a Humidity level below 20%. After that I will use my
Elektrophysik-Koln Mikrotest and measure the paint thinkness. I also
plan to dive under the boat and check my zincs and see if I need to
scrub the bottom.

Joe
Metal preservation expert.



--
"j" ganz @@
www.sailnow.com

"Joe" wrote in message
om...
"Scott Vernon" wrote in message

...
"Jim Cate" wrote

After all the discussion about Joe's "rust bucket" boat Red Cloud,

I
was
very impressed with it.


This means nothing, coming from a Mac26XM owner.

Scotty, Even a Mac owner can tell if a boat has any rust or not or
weather it is well maintained. Jim has a sharp eye.


He keeps it in top shape, with a sparkling
bright red-orange-yellow paint job.

What, no green? No orange either, guess he's talking about all the

safety equipment it international orange.


Seems like a great blue water sailing vessel,


You claim the Mac is a great ''blue water'' boat. Hey Joe, he's

dissin
your
ride!


Be nice to the new member Scotty, IIRC you owned a Mac.

Joe

Scotty



  #12   Report Post  
Martin Baxter
 
Posts: n/a
Default Jim Cate visits RedCloud

Joe wrote:

"Jonathan Ganz" wrote in message ...

Not so sharp that he would run not walk away from a MacXipad.
But, I believe you when you say you don't have rust on your boat.




Well I must admit at the 8th frame above deck under the cap rail I
found a 1/2"X 1/4" spot of rust this week. I will get out the needle
gun, wire wheel, endsallrust, metcoat primer and epoxy top coat and
stop it as soon as we have weather that will permit me to do a proper
job,need a Humidity level below 20%.


Does the humidity down there ever get below 50% Joe?

Cheeers
Marty

  #13   Report Post  
Joe
 
Posts: n/a
Default Jim Cate visits RedCloud

Martin Baxter wrote in message ...
Joe wrote:

"Jonathan Ganz" wrote in message ...

Not so sharp that he would run not walk away from a MacXipad.
But, I believe you when you say you don't have rust on your boat.




Well I must admit at the 8th frame above deck under the cap rail I
found a 1/2"X 1/4" spot of rust this week. I will get out the needle
gun, wire wheel, endsallrust, metcoat primer and epoxy top coat and
stop it as soon as we have weather that will permit me to do a proper
job,need a Humidity level below 20%.


Does the humidity down there ever get below 50% Joe?


About as often as we have a blue moon.

Joe




Cheeers
Marty

  #14   Report Post  
Joe
 
Posts: n/a
Default Jim Cate visits RedCloud

"Jonathan Ganz" wrote in message ...
Nothing wrong with a little rust... keeps West Marine profitable.


Would not know, Never bought a thing from them.

Joe

--
"j" ganz @@
www.sailnow.com

"Joe" wrote in message
om...
"Jonathan Ganz" wrote in message

...
Not so sharp that he would run not walk away from a MacXipad.
But, I believe you when you say you don't have rust on your boat.



Well I must admit at the 8th frame above deck under the cap rail I
found a 1/2"X 1/4" spot of rust this week. I will get out the needle
gun, wire wheel, endsallrust, metcoat primer and epoxy top coat and
stop it as soon as we have weather that will permit me to do a proper
job,need a Humidity level below 20%. After that I will use my
Elektrophysik-Koln Mikrotest and measure the paint thinkness. I also
plan to dive under the boat and check my zincs and see if I need to
scrub the bottom.

Joe
Metal preservation expert.



--
"j" ganz @@
www.sailnow.com

"Joe" wrote in message
om...
"Scott Vernon" wrote in message

...
"Jim Cate" wrote

After all the discussion about Joe's "rust bucket" boat Red Cloud,

I
was
very impressed with it.


This means nothing, coming from a Mac26XM owner.

Scotty, Even a Mac owner can tell if a boat has any rust or not or
weather it is well maintained. Jim has a sharp eye.


He keeps it in top shape, with a sparkling
bright red-orange-yellow paint job.

What, no green? No orange either, guess he's talking about all the

safety equipment it international orange.


Seems like a great blue water sailing vessel,


You claim the Mac is a great ''blue water'' boat. Hey Joe, he's

dissin
your
ride!


Be nice to the new member Scotty, IIRC you owned a Mac.

Joe

Scotty

  #15   Report Post  
Scott Vernon
 
Posts: n/a
Default Jim Cate visits RedCloud

"Joe" wrote

Be nice to the new member Scotty, IIRC you owned a Mac.

Joe


yes, I did, but it wasn't an ''X'', or an ''M''.

Scotty





  #16   Report Post  
Flying Tadpole
 
Posts: n/a
Default Jim Cate visits RedCloud

Beg pardon? Didn't quite catch that...
--
Flying Tadpole

-------------------------
Break Away, Sail Away and putz away
now at http://music.download.com/internetopera
  #17   Report Post  
Flying Tadpole
 
Posts: n/a
Default Jim Cate visits RedCloud



You're having trouble with your eX?

--
Flying Tadpole

-------------------------
Break Away, Sail Away and putz away
now at http://music.download.com/internetopera
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Jim Cate a NO Show Joe ASA 193 June 25th 04 11:32 AM
Noybby Visits California Harry Krause General 51 June 11th 04 01:07 PM
Congrat's to Jim Cate!!!! Bobsprit ASA 7 April 24th 04 04:54 PM
Shut them all up Jim Cate Joe ASA 17 April 22nd 04 09:29 PM
Jim Cate, boat dealer rep? JAXAshby ASA 14 April 12th 04 12:25 PM


All times are GMT +1. The time now is 08:19 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017