LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
DSK
 
Posts: n/a
Default More incredible things learned usenet

"JAXAshby" wrote
who the hell was the stupid cluck who said a wet exhaust needs an antisiphon
valve?



Jeff Morris wrote:
Maybe it was the ABYC (American Boat and Yacht Council)


Yeah, but Jax is *much* smarter than them. I bet none of the ABYC
Technical Committee are in MENSA!

DSK

  #2   Report Post  
JAXAshby
 
Posts: n/a
Default More incredible things learned usenet

dougies, you too have a problem understanding grade school English like
jeffies?

who the hell was the stupid cluck who said a wet exhaust needs an

antisiphon
valve?



Jeff Morris wrote:
Maybe it was the ABYC (American Boat and Yacht Council)


Yeah, but Jax is *much* smarter than them. I bet none of the ABYC
Technical Committee are in MENSA!

DSK









  #3   Report Post  
JAXAshby
 
Posts: n/a
Default More incredible things learned usenet

oxxy, it is forbidden to have the water injection point below the waterline,
except the rare case when it must be. But that rare case was not the boat
under discussion.

"Jeff Morris"
scribbled thusly:

You can backpedal and nitpick that the water injection line is not part of

the
direct path of the exhaust gases, but its pretty clear that everyone

considers
it part of the exhaust system.



You're learning Jeff.
This is where Jocks will claim victory.
He'll be wrong as usual calling it the raw water system or some such
other but hey. that's Jocks.


Oz1...of the 3 twins.

I welcome you to crackerbox palace,We've been expecting you.








  #4   Report Post  
Philip Carroll
 
Posts: n/a
Default More incredible things learned usenet

Oz called that one 100% correct.
"JAXAshby" wrote in message
...
oxxy, it is forbidden to have the water injection point below the

waterline,
except the rare case when it must be. But that rare case was not the boat
under discussion.

"Jeff Morris"
scribbled thusly:

You can backpedal and nitpick that the water injection line is not part

of
the
direct path of the exhaust gases, but its pretty clear that everyone

considers
it part of the exhaust system.



You're learning Jeff.
This is where Jocks will claim victory.
He'll be wrong as usual calling it the raw water system or some such
other but hey. that's Jocks.


Oz1...of the 3 twins.

I welcome you to crackerbox palace,We've been expecting you.










  #5   Report Post  
JAXAshby
 
Posts: n/a
Default More incredible things learned usenet

oxxy is lost to this universe on this one. philly little boy, you wanna tag
along with oxxy, go ahead.

Oz called that one 100% correct.
"JAXAshby" wrote in message
...
oxxy, it is forbidden to have the water injection point below the

waterline,
except the rare case when it must be. But that rare case was not the boat
under discussion.

"Jeff Morris"
scribbled thusly:

You can backpedal and nitpick that the water injection line is not part

of
the
direct path of the exhaust gases, but its pretty clear that everyone
considers
it part of the exhaust system.



You're learning Jeff.
This is where Jocks will claim victory.
He'll be wrong as usual calling it the raw water system or some such
other but hey. that's Jocks.


Oz1...of the 3 twins.

I welcome you to crackerbox palace,We've been expecting you.




















  #6   Report Post  
JAXAshby
 
Posts: n/a
Default More incredible things learned usenet

oxxy, go look at a wet exhaust system and see if you can begin to understand
how it works.

kriste almighty, jeffies, the very first sentence clearly states "raw water
cooling". That ain't exhaust, dude.


Bwaaahahahahahahahahhaaa!
See!

Jocks, you're getting waaaay to easy.

Maybe you could switch back to superchargers or railways, sliding
valve engines...


Oz1...of the 3 twins.

I welcome you to crackerbox palace,We've been expecting you.








  #7   Report Post  
Philip Carroll
 
Posts: n/a
Default More incredible things learned usenet

Naa, I don't like playing tag. Ever been on a snipe hunt? You seem a perfec
snipe hunter.
"JAXAshby" wrote in message
...
oxxy is lost to this universe on this one. philly little boy, you wanna

tag
along with oxxy, go ahead.

Oz called that one 100% correct.
"JAXAshby" wrote in message
...
oxxy, it is forbidden to have the water injection point below the

waterline,
except the rare case when it must be. But that rare case was not the

boat
under discussion.

"Jeff Morris"
scribbled thusly:

You can backpedal and nitpick that the water injection line is not

part
of
the
direct path of the exhaust gases, but its pretty clear that everyone
considers
it part of the exhaust system.



You're learning Jeff.
This is where Jocks will claim victory.
He'll be wrong as usual calling it the raw water system or some such
other but hey. that's Jocks.


Oz1...of the 3 twins.

I welcome you to crackerbox palace,We've been expecting you.




















  #8   Report Post  
JAXAshby
 
Posts: n/a
Default More incredible things learned usenet

phillie, it seems you are more than happy to proclaim to one and all that you
can NOT see where the water injection point is on a wet exhaust and you have no
intention of ever doing so, but you are more than happy to tell the world you
are an expert.

way to go, dum-dum.

Naa, I don't like playing tag. Ever been on a snipe hunt? You seem a perfec
snipe hunter.
"JAXAshby" wrote in message
...
oxxy is lost to this universe on this one. philly little boy, you wanna

tag
along with oxxy, go ahead.

Oz called that one 100% correct.
"JAXAshby" wrote in message
...
oxxy, it is forbidden to have the water injection point below the
waterline,
except the rare case when it must be. But that rare case was not the

boat
under discussion.

"Jeff Morris"
scribbled thusly:

You can backpedal and nitpick that the water injection line is not

part
of
the
direct path of the exhaust gases, but its pretty clear that everyone
considers
it part of the exhaust system.



You're learning Jeff.
This is where Jocks will claim victory.
He'll be wrong as usual calling it the raw water system or some such
other but hey. that's Jocks.


Oz1...of the 3 twins.

I welcome you to crackerbox palace,We've been expecting you.




























  #9   Report Post  
Jeff Morris
 
Posts: n/a
Default More incredible things learned usenet

This is total nonsense. It is quite common, even likely, that the injection
point will be at or near the waterline. Even if its nominally above, one must
add the result of heeling, and possible overloading.

The distance between the injection (with the elbow that raises the injection up)
on the new Yanmar YM series is 16 inches above the prop shaft. While this may
work out on a newer small, fin keel boat, this will very likely be well below
the waterline on a more tradition full keel design where the engine sits deeper.
And, if you subtract some for heeling and overloading, its actually hard to
imagine a setup (other than very small boat) where the injection point isn't
potentially at the waterline.

BTW, my boat, and my previous boat, has a siphon break. I was on a 43 foot
cruising boat today with a Perkins 4-108 where we determined the injection point
was just about at the waterline.

Once again, jax proves he knows about as much about boats as the Tidy Bowl Man.



"JAXAshby" wrote in message
...
oxxy, it is forbidden to have the water injection point below the waterline,
except the rare case when it must be. But that rare case was not the boat
under discussion.

"Jeff Morris"
scribbled thusly:

You can backpedal and nitpick that the water injection line is not part of

the
direct path of the exhaust gases, but its pretty clear that everyone

considers
it part of the exhaust system.



You're learning Jeff.
This is where Jocks will claim victory.
He'll be wrong as usual calling it the raw water system or some such
other but hey. that's Jocks.


Oz1...of the 3 twins.

I welcome you to crackerbox palace,We've been expecting you.










  #10   Report Post  
JAXAshby
 
Posts: n/a
Default More incredible things learned usenet

jefffies, you are spouting your ill-informed opinion.

having the water injection point anywhere near the waterline is forbidden (not
to mention stupid) unless there is no other way possible.

This is total nonsense. It is quite common, even likely, that the injection
point will be at or near the waterline. Even if its nominally above, one
must
add the result of heeling, and possible overloading.

The distance between the injection (with the elbow that raises the injection
up)
on the new Yanmar YM series is 16 inches above the prop shaft. While this
may
work out on a newer small, fin keel boat, this will very likely be well below
the waterline on a more tradition full keel design where the engine sits
deeper.
And, if you subtract some for heeling and overloading, its actually hard to
imagine a setup (other than very small boat) where the injection point isn't
potentially at the waterline.

BTW, my boat, and my previous boat, has a siphon break. I was on a 43 foot
cruising boat today with a Perkins 4-108 where we determined the injection
point
was just about at the waterline.

Once again, jax proves he knows about as much about boats as the Tidy Bowl
Man.



"JAXAshby" wrote in message
...
oxxy, it is forbidden to have the water injection point below the

waterline,
except the rare case when it must be. But that rare case was not the boat
under discussion.

"Jeff Morris"
scribbled thusly:

You can backpedal and nitpick that the water injection line is not part

of
the
direct path of the exhaust gases, but its pretty clear that everyone
considers
it part of the exhaust system.



You're learning Jeff.
This is where Jocks will claim victory.
He'll be wrong as usual calling it the raw water system or some such
other but hey. that's Jocks.


Oz1...of the 3 twins.

I welcome you to crackerbox palace,We've been expecting you.




















 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Incredible learning experience JAXAshby ASA 119 June 19th 04 03:20 AM
Along with Chuck's story, here's another one where things went wrong... Wilko General 3 June 9th 04 02:48 PM
FAQ: Surviving Usenet: A Guide for the Earnest Newcomer Joe Parsons General 15 October 22nd 03 08:30 AM


All times are GMT +1. The time now is 01:10 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017