Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]()
Joe wrote:
Do you have a current were you dock? Not where we are these days, no. When your docking your boat do you like a little current or not? Define "a little." Usually a little current isn't a problem, in fact if you can gauge it right, it can help swing the boat the way you want it. A current from right on the nose can be very helpful. I loved one marina I lived in because it had a 3-7 knot current that ran parellel to the dock. It was great having the current to work against. Always made arrival and departure smooth as a feather. Was this on the river? Usually tides go the other way for at least part of the time ![]() Only bad point was marine life grew on the hull faster and we were affected by wakes more often. I didn't realize that moving water encouraged marine growth. Here in the marina I'm at now we have still water and its 2 tight left turns into the slip. Windage is a bitch, and I have a left hand wheel and dock bow in port side to always throwing the stern away from the docking side while backing, and I usually have to back some because of the speed needed to make it in the slip without being blown down. If I stay here much longer Im going to have to get a right hand wheel. Or a bow thruster. I had a big ungainly racing sloop for a while that we brought in to the dock with a dinghy & outboard lashed alongside. We also sailed it up to the dock but there were some times when that was not a viable option. Fresh Breezes- Doug King |
#2
![]() |
|||
|
|||
![]()
DSK wrote in message ...
Joe wrote: Do you have a current were you dock? Not where we are these days, no. When your docking your boat do you like a little current or not? Define "a little." Usually a little current isn't a problem, in fact if you can gauge it right, it can help swing the boat the way you want it. A current from right on the nose can be very helpful. I loved one marina I lived in because it had a 3-7 knot current that ran parellel to the dock. It was great having the current to work against. Always made arrival and departure smooth as a feather. Was this on the river? Usually tides go the other way for at least part of the time ![]() Not a river, it was a flood control canal that leads from Clear Lake to Galveston bay. And your right, it would change directions daily. Only bad point was marine life grew on the hull faster and we were affected by wakes more often. I didn't realize that moving water encouraged marine growth. Well I did not think so either, but it does. Mostly filter feeders like barnicles. Here in the marina I'm at now we have still water and its 2 tight left turns into the slip. Windage is a bitch, and I have a left hand wheel and dock bow in port side to always throwing the stern away from the docking side while backing, and I usually have to back some because of the speed needed to make it in the slip without being blown down. If I stay here much longer Im going to have to get a right hand wheel. Or a bow thruster. Stern thruster you mean? Bows Ok every time, just backing down make the stern kick out from the dock. I had a big ungainly racing sloop for a while that we brought in to the dock with a dinghy & outboard lashed alongside. We also sailed it up to the dock but there were some times when that was not a viable option. Getting into the slip not a problem, I just hate fiddleing around. Witha right hand wheel I could just backdown kick over to the dock and drop the lines. Not a biggy just for convience I wish I had a RH wheel. Joe Fresh Breezes- Doug King |
#3
![]() |
|||
|
|||
![]()
I didn't realize that moving water encouraged marine growth.
Joe wrote: Well I did not think so either, but it does. Mostly filter feeders like barnicles. OK, that makes sense... the current brings them more food than they'd get in still water. Or a bow thruster. Stern thruster you mean? Bows Ok every time, just backing down make the stern kick out from the dock. Maybe if you ease into reverse sooner & more gently so as not to get so much kick? One thing I worry about is our tranny linkage. I tend to shift in and out of gear often, using busrts of forward against the rudder to put the stern where I want it. I also check the linakge every day, but I still think about it. It's difficult to keep the boat out of situations where a linkage failure could lead to trouble. Given a choice between stern or bow thruster, I'd take one at the bow. If you can swing the bow where you want it, independently, you're not nearly so dependent on forward speed to steer and can use the rudder & prop walk to bring the stern where you want it. Just MHO.... Fresh Breezes- Doug King |
#4
![]() |
|||
|
|||
![]()
DSK wrote in message ...
I didn't realize that moving water encouraged marine growth. Joe wrote: Well I did not think so either, but it does. Mostly filter feeders like barnicles. OK, that makes sense... the current brings them more food than they'd get in still water. Or a bow thruster. Stern thruster you mean? Bows Ok every time, just backing down make the stern kick out from the dock. Maybe if you ease into reverse sooner & more gently so as not to get so much kick? That would be OK if I did not ram the dock. Guess you have to see were I dock, wind is funneled between the building that hols the cigar boats up in slings. So on most spring and summer days we have 10-15 kts wind blowing thru. Hits me broadside going into the slip. The slip is 45 foot and the boat is 42. My boats a ketch with a 55ft main mast and a 40 ft mizzen mast so I have lots of windage to deal with. If I could just coast in and easily stop it would not be as much an issue. One thing I worry about is our tranny linkage. I tend to shift in and out of gear often, using busrts of forward against the rudder to put the stern where I want it. Yeah one of my worst FU was when I first bought RedCloud. Painted the bottom and was putting in back in the water. Backing out of the lift slip my linkage came off the trannie and stuck in reverse. Ended up backing into a 60 foot wooden chris craft that had just been restored, only took out a few planks but felt real bad about it. When the linkage jumped off I tried to rev up and go forward but that just made me back faster, and my crew was to wimpy to jump inbetween the boats to stop me. There was a pregnant lady aboard and she started crying saying her husband was going to blow his top. I told her to not worry about it I would pay to have it fixed and gave her my number....the boat was gone the nexr day and I never heard from them again. I also check the linakge every day, but I still think about it. It's difficult to keep the boat out of situations where a linkage failure could lead to trouble. Yeah I check my linkage all the time now and make sure the cotter pin is still there, and I check my shaft coupler and shaft retaining bolt before I kick off. Had my shaft back out of the coupler once and thats just as bad. Ended up blowing down here in the marina, The cigerboat guys get kind of nervious when a steel boat is blowing toward their bows that hang out from the lifts. But its usually them that are screwing up here. I got some great pictures this fall of a guy with one engine tryong to get in a slip here on a 45 ft scarab. He got a running backwards start to his slip missed his slip and went in underneath a boat hanging in the slip next to his, wiped out his little windsheld and dash. Had to get another boat to pull him out, he was lucky he did not get killed. Went and got my camera after his first 4 or 5 tries and knew something interesting was going to happen. Given a choice between stern or bow thruster, I'd take one at the bow. If you can swing the bow where you want it, independently, you're not nearly so dependent on forward speed to steer and can use the rudder & prop walk to bring the stern where you want it. Just MHO.... Well in MHO bow thruster do not belong on anything under 220 foot. I ran some supply boats that had bow thrusters and hated listening to the MF scream and rattle for hours on end as we offloaded. Is your trawler a single or double screw? Joe MSV RedCloud Fresh Breezes- Doug King |
#5
![]() |
|||
|
|||
![]()
Joe wrote:
.....Guess you have to see were I dock, wind is funneled between the building that hols the cigar boats up in slings. So on most spring and summer days we have 10-15 kts wind blowing thru. Hits me broadside going into the slip. The slip is 45 foot and the boat is 42. My boats a ketch with a 55ft main mast and a 40 ft mizzen mast so I have lots of windage to deal with. If I could just coast in and easily stop it would not be as much an issue. A sudden gust of wind, especially when it's swirling around buildings or trees, can be pretty bad. Gives you that "Siezed By A Giant Hand" helpless feeling! One thing I like about the tugboat is it does not have much windage, but it does have a big skeg, so it does not blow around easily. .... I got some great pictures this fall of a guy with one engine tryong to get in a slip here on a 45 ft scarab. He got a running backwards start to his slip missed his slip and went in underneath a boat hanging in the slip next to his, wiped out his little windsheld and dash. Had to get another boat to pull him out, he was lucky he did not get killed. Went and got my camera after his first 4 or 5 tries and knew something interesting was going to happen. The guys with the penis boats are almost always funny whenever there is some skill needed... if they had a clue, they wouldn't want one of those kinds of boats! Well in MHO bow thruster do not belong on anything under 220 foot. I ran some supply boats that had bow thrusters and hated listening to the MF scream and rattle for hours on end as we offloaded. Is your trawler a single or double screw? Single. I prefer the fuel economy & lower maintenance, plus there's a lot more room down in the engine room. We don't *need* a bow thruster, but if we had one, we would have a wider range of possibilities with regard to getting in & out of slips and other tight spaces. Right now, I spend some time looking over the upcoming maneuver carefully, and if it looks too tight (ie a 50% chance or greater of smacking into a really nice expensive boat) then we turn around and go back to the T-pier ![]() I had one embarassing moment, when I was turning the boat around in a relatively tight basin, to come alongside the end of a dock to pick up friends. There was a big expensive yacht alongside the opposide wall, and a nice lady on board with a British accent watching us nervously. I figured the wind would blow us away from this big expensive yacht, since it was from that direction, and to keep from getting hung up on the dock head, I favored the yacht side a little too much.... there was a swirl of wind that almost pulled us right against that yacht's gleaming topsides. But we weren't quite into the point of no return, I managed to pick up our friends with no scrapes or thuds. Fresh Breezes- Doug King |
#6
![]() |
|||
|
|||
![]()
DSK wrote in message
Is your trawler a single or double screw? Single. I prefer the fuel economy & lower maintenance, plus there's a lot more room down in the engine room. Thats ok unless you lose one engine. And of-course twins manuver 400 times better. We don't *need* a bow thruster, but if we had one, we would have a wider range of possibilities with regard to getting in & out of slips and other tight spaces. Right now, I spend some time looking over the upcoming maneuver carefully, and if it looks too tight (ie a 50% chance or greater of smacking into a really nice expensive boat) then we turn around and go back to the Not me I like to crowd the really expensive yachts and watch the yachtmasters blow there tops. If its a stbd side to docking, I have no fear. I like to do the Capt Ron style landing, my brit boat had a stbd side helm which makes it easy for me to single hand land her and tie her up if needed . BTW Capt Rons Boat is a local boat here. Joe T-pier ![]() I had one embarassing moment, when I was turning the boat around in a relatively tight basin, to come alongside the end of a dock to pick up friends. There was a big expensive yacht alongside the opposide wall, and a nice lady on board with a British accent watching us nervously. I figured the wind would blow us away from this big expensive yacht, since it was from that direction, and to keep from getting hung up on the dock head, I favored the yacht side a little too much.... there was a swirl of wind that almost pulled us right against that yacht's gleaming topsides. But we weren't quite into the point of no return, I managed to pick up our friends with no scrapes or thuds. Fresh Breezes- Doug King |
#7
![]() |
|||
|
|||
![]()
Single. I prefer the fuel economy & lower maintenance, plus there's a lot more room down in the
engine room. Joe wrote: Thats ok unless you lose one engine. Doesn't worry me.... since I can spend all my engine maintenance on one engine instead of two, I have at least twice the reliability. Plus, the usual causes of engine failure are either fuel or battery related, so having two engines would not help. IMHO the idea of a "get-home" engine is simply marketing to insecurity & ignorance. It is only extra weight, extra drag, extra expense, extra gear crammed into the machinery space... and extra maintenance made more difficult by poor access. And of-course twins manuver 400 times better. Nah, only about 350X ![]() There are a few boats I have looked over that had enough room for a sensible two-engine lay out, but the added expense & maintenance is still a downer for me. Not me I like to crowd the really expensive yachts and watch the yachtmasters blow there tops. If its a stbd side to docking, I have no fear. I like to do the Capt Ron style landing, my brit boat had a stbd side helm which makes it easy for me to single hand land her and tie her up if needed . BTW Capt Rons Boat is a local boat here. I've only been handling this power boat for about a year, so I don't really have the experience to play around the same way I would in a sailboat. A couple weeks back, I docked a friends 40+ sailboat singlehanded in a bit of cross wind, it seemed like old times. Fresh Breezes- Doug King |
#8
![]() |
|||
|
|||
![]() "Joe" wrote in message om... That would be OK if I did not ram the dock. Guess you have to see were I dock, wind is funneled between the building that hols the cigar boats up in slings. So on most spring and summer days we have 10-15 kts wind blowing thru. Hits me broadside going into the slip. The slip is 45 foot and the boat is 42. My boats a ketch with a 55ft main mast and a 40 ft mizzen mast so I have lots of windage to deal with. If I could just coast in and easily stop it would not be as much an issue. Jeeeeze. I had assumed that you had a motor boat. Your boat has a keel, fer cripes sake! It may have windage, but the keel will resist the windage. I often see clumsy oafs, like you, in our marina. They engage full forward, and then full reverse. They seem to have no feel for the boat's handling at all. As it happens, I have a berth that might be similiar to your's. I'm at the end of the fairway, and the prevailing wind blows my bow off. I never have any problem at all, because I take it slowly. I used to have a power boat, and in those days I had to worry about the things that you describe. Now, we put the engine into neutral about 100 yards from the slip, and just glide in. The engine is rarely used at all after that, apart from the final burst astern. When my younger son was only 9 years old he was able to do it to perfection. Maybe you should get some lessons??? Really, Joe, you are an embarrassement to real sailors. You are trying to park your boat as if it was a big powerboat. Regards Donal -- |
#9
![]() |
|||
|
|||
![]()
"Donal" wrote in message ...
"Joe" wrote in message om... That would be OK if I did not ram the dock. Guess you have to see were I dock, wind is funneled between the building that hols the cigar boats up in slings. So on most spring and summer days we have 10-15 kts wind blowing thru. Hits me broadside going into the slip. The slip is 45 foot and the boat is 42. My boats a ketch with a 55ft main mast and a 40 ft mizzen mast so I have lots of windage to deal with. If I could just coast in and easily stop it would not be as much an issue. Jeeeeze. I had assumed that you had a motor boat. Thats one of your problems lanod, your always assuming. Your boat has a keel, fer cripes sake! It may have windage, but the keel will resist the windage. The marina is so shallow I have to pull my keel board up Lanod. So you assumed again. I often see clumsy oafs, like you, in our marina. They engage full forward, and then full reverse. They seem to have no feel for the boat's handling at all. Who said anything about full throttle forward or reverse Loanod? another assumption? As it happens, I have a berth that might be similiar to your's. I'm at the end of the fairway, and the prevailing wind blows my bow off. I never have any problem at all, because I take it slowly. I used to have a power boat, and in those days I had to worry about the things that you describe. So your between 3 story buildings, that funnel wind, in shallow water? Wind hits you broadside going into your narrow slip huh? Now, we put the engine into neutral about 100 yards from the slip, That must be nice to have a hundred yards to coast in and set up a turn. and just glide in. The engine is rarely used at all after that, apart from the final burst astern. OH MY GOD a BURST astern.... Call the Harbor master and chief Yachtmaster. How many tons do you stop with your burst astern Lanod? When my younger son was only 9 years old he was able to do it to perfection. Maybe you should get some lessons??? Is he a physic yachtmaster like you? Really, Joe, you are an embarrassement to real sailors. You are trying to park your boat as if it was a big powerboat. It is. And its a big Sail boat. Thats why I always call it a Motor Sailing Vessel. Nice solid floor boards to, how's about your boat. Regards Donal -- Yeah Right, Joe MSV RedCloud |
#10
![]() |
|||
|
|||
![]() "Joe" wrote in message om... "Donal" wrote in message ... "Joe" wrote in message om... Jeeeeze. I had assumed that you had a motor boat. Thats one of your problems lanod, your always assuming. Your boat has a keel, fer cripes sake! It may have windage, but the keel will resist the windage. The marina is so shallow I have to pull my keel board up Lanod. So you assumed again. Hey! Don't blame me if you can't afford a proper slip! I've already suggested a way for you to save money. I often see clumsy oafs, like you, in our marina. They engage full forward, and then full reverse. They seem to have no feel for the boat's handling at all. Who said anything about full throttle forward or reverse Loanod? another assumption? You did, Eoj. You crashed into a neighbour's boat with enough force to cause physical damage to their vessel. We've all seen people like you in our marinas. No sense of delicacy, no feeling for how the boat behaves, and a blind faith in the power of the engine. I recently saw a guy hit 5 boatsas he tried to park hi boat. At least he hit them all fairly gently, and no real damage was done. He admitted that it was the first time that he had sailed. What's your excuse? So your between 3 story buildings, that funnel wind, in shallow water? Wind hits you broadside going into your narrow slip huh? Emmmm, that's not very far from the truth. Now, we put the engine into neutral about 100 yards from the slip, That must be nice to have a hundred yards to coast in and set up a turn. You should try it. Sailboats are good at it. Powerboats are not good at it. and just glide in. The engine is rarely used at all after that, apart from the final burst astern. OH MY GOD a BURST astern.... Call the Harbor master and chief Yachtmaster. How many tons do you stop with your burst astern Lanod? What a stupid question!! The tonnage that is stopped is relative to the horsepower available. I suspect that you have much more HP available than I have. When my younger son was only 9 years old he was able to do it to perfection. Maybe you should get some lessons??? Is he a physic yachtmaster like you? You're drunk, aren't you? Really, Joe, you are an embarrassement to real sailors. You are trying to park your boat as if it was a big powerboat. It is. And its a big Sail boat. Thats why I always call it a Motor Sailing Vessel. Nice solid floor boards to, how's about your boat. Ask Boobie. Regards Donal -- |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
SSB Antenna theory | Electronics | |||
Notes on short SSB antennas, for Larry | Cruising | |||
Notes on short SSB antennas, for Larry | Electronics | |||
Parasitic Current Drain Source Elusive | Electronics |