LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #10   Report Post  
posted to rec.boats.building,rec.boats.cruising,uk.rec.boats.power
Skip Gundlach
 
Posts: n/a
Default Clear corrugated suction hose (was) Bilge Pump Upgrade

Since I started the deviation from the original, and Peggie has raised what
I consider valid points about below-grade stuff...

My applications are for suction or lift only. That is, if it's below
waterline, and attached to a manual bilge pump way above the waterline, the
only time it will be used is to suck up from the bilge. If it's attached to
a submerged bilge pump, the only time it will have water in it is when the
bilge pump is pushing it out, to a vented loop drain.

If those are the uses, are there any caveats? I'm interested in increasing
flow/decreasing resistance by not having that wire-wrap-without-a-slit or
small-shop-vac-suckerhose equivalent usual bilge hose with the cuffs every
foot or so for my discharge. And, my manuals are Whale Gusher 10s, with big
hoses (what's currently there looks about like central vacuum cleaner hose,
but it's not smooth on the inside and quite thinwalled).

And, just to check, I thought that all below-waterline hoses (with static
pressure, of course), for any application, were supposed to be wire
reinforced. Was that urban legend foisted on me by my diesel mech and
surveyor, or true?

Thanks.

L8R

Skip

--
Morgan 461 #2
SV Flying Pig KI4MPC
http://tinyurl.com/384p2 The vessel as Tehamana, as we bought her

"Twenty years from now you will be more disappointed by the things you
didn't do than by the ones you did do. So throw off the bowlines. Sail
away from the safe harbor. Catch the trade winds in your sails. Explore.
Dream. Discover." - Mark Twain
"Peggie Hall" wrote in message
om...
Roger Long wrote:
Are you talking about the kind of hose in this picture?


http://home.maine.rr.com/rlma/Bilge.htm#Sump


I can't tell from the photo, Roger, whether it's corrugated or only
reinforced. If it's rated for the application--not only for below
waterline, but for whatever goes through it and the temperature of
it--it's ok. If it's not, I'd replace it.
--
Peggie
----------
Peggie Hall
Specializing in marine sanitation since 1987
Author "Get Rid of Boat Odors - A Guide To Marine Sanitation Systems and
Other Sources of Aggravation and Odor"
http://shop.sailboatowners.com/books...ku=90&cat=1304





 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Sea Ray Sundancer Bilge Question Marty Schulze General 6 June 24th 11 09:00 PM
Bilge Pump Upgrade Marc Boat Building 21 March 10th 06 02:59 AM
Clear corrugated suction hose (was) Bilge Pump Upgrade Pete C Cruising 12 March 10th 06 02:59 AM
Adding an electrical bilge pump [email protected] Cruising 15 February 4th 06 08:03 PM
SCR controlled bilge pump Offbreed Electronics 16 January 11th 06 12:53 AM


All times are GMT +1. The time now is 04:15 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017