Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]()
Tink:
========= Landlubbers call them ropes, they're called lines! TnT ============= Sorry to disappoint, sailors call them sheets. Wilf |
#2
![]() |
|||
|
|||
![]() "Tinkerntom" wrote in message oups.com... KMAN wrote: in article D353e.866271$8l.306388@pd7tw1no, frtzw906 at wrote on 4/1/05 12:34 AM: The best thing to do is simply start. Introduce a new thread and see where it goes. It isn't the responsibility of the rest of the world to provide the type of discussion you are looking for. KMAN: =========== That being said, the dang water is still frozen here, so aside from telling you about getting my gear organized, there isn't much to say for another couple of weeks ![]() ================ I think I'm going to bolt my roofrack contraption together tomorrow. Wilf =========== I think I will inspect various ropes for evidence of fraying. Landlubbers call them ropes, they're called lines! TnT No, I'm talking about ropes. I've got various ropes in the shed. |
#3
![]() |
|||
|
|||
![]()
KMAN wrote in
: in article D353e.866271$8l.306388@pd7tw1no, frtzw906 at wrote on 4/1/05 12:34 AM: The best thing to do is simply start. Introduce a new thread and see where it goes. It isn't the responsibility of the rest of the world to provide the type of discussion you are looking for. KMAN: =========== That being said, the dang water is still frozen here, so aside from telling you about getting my gear organized, there isn't much to say for another couple of weeks ![]() ================ I think I'm going to bolt my roofrack contraption together tomorrow. Wilf =========== I think I will inspect various ropes for evidence of fraying. I'm going to drill about 16 holes in the deck of my cedar strip kayak. I've never cared much for the deck fittings (web loops) I originally installed so I'm going to build in some recessed fittings. The fittings are simply small pieces of mahogany, about an inch long, 1/4" wide, and 1/2" deep with two holes drilled in the side. The holes in the deck will be drilled with a 1" forstner bit, and the a 2" (or so) diameter piece of wood (probably red cedar) will cover the hole under the deck and will be epoxied in place. Then I'll use the same forstner bit do drill into the under deck covers to a depth such that the fittings will be flush with the top of the deck. I'll epoxy the fittings into place, then sand the deck around the fittings for a piece of fiberglass cloth covering the fittings. After filling in weave, the rest of the deck and hull will be get a light sanding before putting on several coats of varnish. When I'm done the boat will have a much nice deck rigging layout and will likely look better than the day I first launched it. |
#4
![]() |
|||
|
|||
![]()
I'm not a very handy guy and the lack of a drawing doesn't help a
dimwit like me figure this out. But here's my question: won't you have 16 holes in which water will pool? If so, I'm guessing that it's not an issue? Wilf ========= |
#5
![]() |
|||
|
|||
![]()
On 31 Mar 2005 09:38:52 -0800, "
wrote: I've been waiting patiently to read about paddling and touring trips. Really tired of this other subject that keeps popping up. Let's hear about water sports... I'm a canoest, and seakayaker...and want to read and talk about that...isn't that why we signed up here? If not let me know, and I'll unsubscribe and move on... Let's give it a go..eh? Shall I say, "You first." or "Bub bye now." ? Instead of whining and threatening to deprive us of your, possibly otherwise nice, company, why don't you tell us what and where you paddle and what's good or bad about it? All I paddle are a canoe (rental the last couple of years since I gave away my stipper) and a recreational Old Town Otter kayak and (when I lose 5 more pounds?) an old Perception Dancer that I use like a recreational kayak. I do them on lakes and the St. Croix River in MN/WI. Like them all, Lke the places except that too many other people in canoes like the 'Croix on warm weekends. But the backwaters remove most of the aluminum hatch from sight and sound. Cyli r.bc: vixen. Minnow goddess. Speaker to squirrels. Often taunted by trout. Almost entirely harmless. http://www.visi.com/~cyli email: lid (strip the .invalid to email) |
#7
![]() |
|||
|
|||
![]() "Cyli" wrote in message ... On 31 Mar 2005 09:38:52 -0800, " wrote: I've been waiting patiently to read about paddling and touring trips. Really tired of this other subject that keeps popping up. Let's hear about water sports... I'm a canoest, and seakayaker...and want to read and talk about that...isn't that why we signed up here? If not let me know, and I'll unsubscribe and move on... Let's give it a go..eh? Shall I say, "You first." or "Bub bye now." ? Instead of whining and threatening to deprive us of your, possibly otherwise nice, company, why don't you tell us what and where you paddle and what's good or bad about it? All I paddle are a canoe (rental the last couple of years since I gave away my stipper) and a recreational Old Town Otter kayak and (when I lose 5 more pounds?) an old Perception Dancer that I use like a recreational kayak. I do them on lakes and the St. Croix River in MN/WI. Like them all, Lke the places except that too many other people in canoes like the 'Croix on warm weekends. But the backwaters remove most of the aluminum hatch from sight and sound. Cyli r.bc: vixen. Minnow goddess. Speaker to squirrels. Often taunted by trout. Almost entirely harmless. http://www.visi.com/~cyli email: lid (strip the .invalid to email) Nice to know there are others out there with a Dancer that is a little snug. It takes everything that boat has to keep me afloat. I have removed the plastic bit under the front combing edge and that gets me into the thing. I was somewhat worried that I would not come out in a wet exit but when the time came, it came off like a good pair of pants. I love the looks I get when I show up with it. I'm 6' 1'' and about 275-285 depending on what I had for breakfast ; and most people where I go have huge canoes and are shocked that I am actually going to go out in my "little" boat. Ken |
#8
![]() |
|||
|
|||
![]()
On Sat, 02 Apr 2005 17:02:16 GMT, "No Spam"
wrote: (snipped) Nice to know there are others out there with a Dancer that is a little snug. It takes everything that boat has to keep me afloat. I have removed the plastic bit under the front combing edge and that gets me into the thing. I was somewhat worried that I would not come out in a wet exit but when the time came, it came off like a good pair of pants. I love the looks I get when I show up with it. I'm 6' 1'' and about 275-285 depending on what I had for breakfast ; and most people where I go have huge canoes and are shocked that I am actually going to go out in my "little" boat. I'm short and chubby and old enough to be less than agile. Bad for getting in and out of a Dancer. But they're so* nice to paddle. Even though I don't do whitewater. I once thought I would (about the time I bought it) but then I tried it a bit and, while it's fun to go downriver upside down very fast, I wasn't able to do the roll. Had to pop the skirt every time and swim the little boat down to where I could drain it and force my way back in. It makes a nice recreational boat, especially in backwaters and swamps. One can go over a tree trunk that any other boat would have to beach and pull around. You push that nose up, reach down to the sides and do a hand push (can't do that much more, either. Bummer.) and slide yourself right over. Places anyone else has to get out to pull over the sand bar, you just dig the paddle in the sand and scoot over it, if there's any water flowing across it. One does have to learn how to paddle in a straight line, but that comes along well. Cyli r.bc: vixen. Minnow goddess. Speaker to squirrels. Often taunted by trout. Almost entirely harmless. http://www.visi.com/~cyli email: lid (strip the .invalid to email) |
#9
![]() |
|||
|
|||
![]() Cyli wrote: On Sat, 02 Apr 2005 17:02:16 GMT, "No Spam" wrote: (snipped) Nice to know there are others out there with a Dancer that is a little snug. It takes everything that boat has to keep me afloat. I have removed the plastic bit under the front combing edge and that gets me into the thing. I was somewhat worried that I would not come out in a wet exit but when the time came, it came off like a good pair of pants. I love the looks I get when I show up with it. I'm 6' 1'' and about 275-285 depending on what I had for breakfast ; and most people where I go have huge canoes and are shocked that I am actually going to go out in my "little" boat. I'm short and chubby and old enough to be less than agile. Bad for getting in and out of a Dancer. But they're so* nice to paddle. Even though I don't do whitewater. I once thought I would (about the time I bought it) but then I tried it a bit and, while it's fun to go downriver upside down very fast, I wasn't able to do the roll. Had to pop the skirt every time and swim the little boat down to where I could drain it and force my way back in. It makes a nice recreational boat, especially in backwaters and swamps. One can go over a tree trunk that any other boat would have to beach and pull around. You push that nose up, reach down to the sides and do a hand push (can't do that much more, either. Bummer.) and slide yourself right over. Places anyone else has to get out to pull over the sand bar, you just dig the paddle in the sand and scoot over it, if there's any water flowing across it. One does have to learn how to paddle in a straight line, but that comes along well. Cyli r.bc: vixen. Minnow goddess. Speaker to squirrels. Often taunted by trout. Almost entirely harmless. http://www.visi.com/~cyli email: lid (strip the .invalid to email) Cyli, Your the kind of gal I would like to see on the survivor program, any chance you would volunteer? TnT |
#10
![]() |
|||
|
|||
![]()
On 4 Apr 2005 23:09:30 -0700, "Tinkerntom" wrote:
Cyli r.bc: vixen. Minnow goddess. Speaker to squirrels. Often taunted by trout. Almost entirely harmless. http://www.visi.com/~cyli email: lid (strip the .invalid to email) Cyli, Your the kind of gal I would like to see on the survivor program, any chance you would volunteer? TnT I'd be voted off more quickly than I heard the first guy on the first show was. The guy that was the only one that knew how to start a fire... What little I've seen of it is full of people who want to be movie or TV actors. Young pretty people in good shape. I don't fit any of those qualifications. Oh, yeah, and I can be a tad abrasive if I'm sure I'm right and no one agrees with me. And it's likely no one would. Most of them (again from the very little I've seen) have brains the size of walnuts and have common sense factors in the minus range. I did see one of their contests all the way through once (my husband went downstairs to use the computer, so the channels didn't change). One where the people were shooting at pumpkins or something like that. Duh. This is not survivalism at basic. You walk over, grab the pumpkin, cut it open and take it away to cook it. You don't, if in real need, make a bow and arrow first thing, you make pit traps or deadfalls or nets. Then you make bows and arrows. Or atalals (sp? Spear throwers, whatever they're called). Anyway, I think you can see now why I'd not enter one, even if I were in good shape. After three days with what I've seen of those people I'd possibly use any bow and arrows they gave me to shoot the guide, the other contestants, or, better yet, the producer, if I didn't shortcut it all and use the arrow to slit my wrists (remember, it's down, not across). But thank you for the compliment. Cyli r.bc: vixen. Minnow goddess. Speaker to squirrels. Often taunted by trout. Almost entirely harmless. http://www.visi.com/~cyli email: lid (strip the .invalid to email) |
Reply |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Paddling Colleges: Summary | General | |||
Dictionary of Paddling Terms :-) | Touring | |||
Dictionary of Paddling Terms :-) | General | |||
Tortoise Reserve Work Party & Paddling Weekend | General | |||
Tortoise Reserve Work Party & Paddling Weekend | Touring |