Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]()
Bent shafts are designed and find there greatest advantage on the recovery
part of a stroke the angle of the blade allows the paddle to avoid the pull down effect caused by the angle of a straight paddle at the backend of a stroke. As the paddle comes to the rear of the stroke the blade angles back while the handle moves forward in line with the body of the canoe. At this point the paddle instead of focusing its energy in a forward motion for the canoe it actually causes a pulling down of the canoe once it passes the point perpendicular to the paddler. A bent shaft decreases the angle at which the pulling down effect occurs. With a straight paddle one has the advantage of adding different levels of effectiveness to the paddling style through different strokes which may be more difficult to explore with a bent shaft. Plus if your bow person is bothering you your reach with a bent shaft is cu short usually of making them. Good luck with your choice of paddles. -- Abe Elias Diving Sparrow Paddle Co, http://home.cogeco.ca/~aelias "lcopps" wrote in message news ![]() A Bent shaft allows your hands to take a more natural position and reduce strain on your wrists. However, a strait shaft allows the paddler to shift hand positions on the shaft. A bent shaft provides benefits if hands are placed on a specific place. Therefore, it is more important when selecting a bent shaft paddle to choose proper length shaft. During a stroke, your dry blade hand should not rise above the height of your shoulder. Otherwise, shoulder injury can occur. So one could cite good reasons to choose either. I paddle more with a bent shaft. Ryan Morin wrote: I want to buy some new paddles and was looking around and noticed that there is a type that hasa bent blade. Just wondering if it is a better way to go for fla****er lake and river travel. |
#2
![]() |
|||
|
|||
![]() "Canranger44" wrote in message ... Bent shafts are designed and find there greatest advantage on the recovery part of a stroke the angle of the blade allows the paddle to avoid the pull down effect caused by the angle of a straight paddle at the backend of a stroke. As the paddle comes to the rear of the stroke the blade angles back while the handle moves forward in line with the body of the canoe. At this point the paddle instead of focusing its energy in a forward motion for the canoe it actually causes a pulling down of the canoe once it passes the point perpendicular to the paddler. A bent shaft decreases the angle at which the pulling down effect occurs. With a straight paddle one has the advantage of adding different levels of effectiveness to the paddling style through different strokes which may be more difficult to explore with a bent shaft. Plus if your bow person is bothering you your reach with a bent shaft is cu short usually of making them. Good luck with your choice of paddles. -- Abe Elias Diving Sparrow Paddle Co, http://home.cogeco.ca/~aelias "lcopps" wrote in message news ![]() A Bent shaft allows your hands to take a more natural position and reduce strain on your wrists. However, a strait shaft allows the paddler to shift hand positions on the shaft. A bent shaft provides benefits if hands are placed on a specific place. Therefore, it is more important when selecting a bent shaft paddle to choose proper length shaft. During a stroke, your dry blade hand should not rise above the height of your shoulder. Otherwise, shoulder injury can occur. So one could cite good reasons to choose either. I paddle more with a bent shaft. Ryan Morin wrote: I want to buy some new paddles and was looking around and noticed that there is a type that hasa bent blade. Just wondering if it is a better way to go for fla****er lake and river travel. Lake users will love bent shaft. River use...get it straight. Simple choice. |
#3
![]() |
|||
|
|||
![]() "Bart Wallace" wrote in message . .. Lake users will love bent shaft. River use...get it straight. Simple choice. There's a lot of truth in this statement but it is not universally true. Because of my choice of preferred strokes a straight shaft is chosen even on lakes. I feel that my paddling style with a straight shaft gains enough efficiency to compensate for lack of the bent shaft advantage. Many paddlers on lakes, however do prefer the bent shaft. A lot has to do with how one originally learned to paddle. John |
#4
![]() |
|||
|
|||
![]()
For the most part it is a matter of preference. If you are going to paddle
marathon style you use a bent shaft but then a gain you wouldn't catch me paddling Marathon style its not my preference. I paddle straight all the way but very once and a while I will ask to borrow a bent just to check it out. -- Abe Elias Diving Sparrow Paddle Co, http://home.cogeco.ca/~aelias "Te Canaille" wrote in message news:6vF3c.42873$UU.5767@lakeread01... "Bart Wallace" wrote in message . .. Lake users will love bent shaft. River use...get it straight. Simple choice. There's a lot of truth in this statement but it is not universally true. Because of my choice of preferred strokes a straight shaft is chosen even on lakes. I feel that my paddling style with a straight shaft gains enough efficiency to compensate for lack of the bent shaft advantage. Many paddlers on lakes, however do prefer the bent shaft. A lot has to do with how one originally learned to paddle. John |
#5
![]() |
|||
|
|||
![]() "Te Canaille" wrote in message news:6vF3c.42873$UU.5767@lakeread01... "Bart Wallace" wrote in message . .. Lake users will love bent shaft. River use...get it straight. Simple choice. There's a lot of truth in this statement but it is not universally true. Because of my choice of preferred strokes a straight shaft is chosen even on lakes. I feel that my paddling style with a straight shaft gains enough efficiency to compensate for lack of the bent shaft advantage. Many paddlers on lakes, however do prefer the bent shaft. A lot has to do with how one originally learned to paddle. John True! Whenever I see an old, heavy beaver tail being manhandled I ask why. Then I answer myself with why not. If it works, it works. |
#6
![]() |
|||
|
|||
![]()
I've used bent shaft sea kayak paddles and they are a little easier on the
wrists over the long hall, but still not as easy as a traditional style paddle (affectionately known as a twig). |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
rec.boats.paddle sea kayaking FAQ | General | |||
rec.boats.paddle sea kayaking FAQ | General | |||
rec.boats.paddle sea kayaking FAQ | General | |||
rec.boats.paddle sea kayaking FAQ | General | |||
rec.boats.paddle sea kayaking FAQ | General |