![]() |
|
Recommendation for oil change pump
I'm not sure if you guys still talk about boats or not. ;)
I have of 04 Bayliner 185 with a 190hp engine. It's about time to think about putting her away for my first season and I'm wonder what the best options are for pulling the oil out. A friend of mine had the dealer install a quickdrain on the bottom of the engine with a hose that drains the oil out the back. I was afraid to ask what the dealer charges for this since they charge $400 just for the oil/gear lube change. If my best bet is the pump, what type should I get? I've seen some that work of a drill, some that are hand pumped etc. Can anyone recommend one to me? Also, is there somewhere cheaper than the dealer to get it from? -robert |
Recommendation for oil change pump
Robert M. Gary wrote:
I'm not sure if you guys still talk about boats or not. ;) I have of 04 Bayliner 185 with a 190hp engine. It's about time to think about putting her away for my first season and I'm wonder what the best options are for pulling the oil out. A friend of mine had the dealer install a quickdrain on the bottom of the engine with a hose that drains the oil out the back. I was afraid to ask what the dealer charges for this since they charge $400 just for the oil/gear lube change. If my best bet is the pump, what type should I get? I've seen some that work of a drill, some that are hand pumped etc. Can anyone recommend one to me? Also, is there somewhere cheaper than the dealer to get it from? -robert The sureflo system is a pretty good one. There might be better ones but I'm not familiar with them. http://www.overtons.com/modperl/prod...s _oil_change |
Recommendation for oil change pump
On Sep 21, 9:39*am, jim wrote:
Robert M. Gary wrote: The sureflo system is a pretty good one. There might be better ones but I'm not familiar with them.http://www.overtons.com/modperl/prod...rowse&aID=24A&... I noticed that Walmart has a hand pump that they said is for the purpose for $7. What would be the advantage to the more expensive systems. Its seems like all I need is a pump to pull the oil out into my used tank. -robert |
Recommendation for oil change pump
On Sun, 21 Sep 2008 20:48:18 -0700 (PDT), "Robert M. Gary"
wrote: On Sep 21, 9:39*am, jim wrote: Robert M. Gary wrote: The sureflo system is a pretty good one. There might be better ones but I'm not familiar with them.http://www.overtons.com/modperl/prod...rowse&aID=24A&... I noticed that Walmart has a hand pump that they said is for the purpose for $7. What would be the advantage to the more expensive systems. Its seems like all I need is a pump to pull the oil out into my used tank. -robert I used a hand pump for a while with one of my old sail boats. Fortunately it was a small engine with a small sump because it was a slow, hot, messy process. Something like the Shureflo or Jabsco makes fairly easy work of it and will easily pay for itself compared to professional service prices. |
Recommendation for oil change pump
On Sep 22, 6:37*pm, Wayne.B wrote:
used a hand pump for a while with one of my old sail boats. Fortunately it was a small engine with a small sump because it was a slow, hot, messy process. *Something like the Shureflo or Jabsco makes fairly easy work of it and will easily pay for itself compared to professional service prices. What do you think about the tubes that connect to the drain pan? It looks like you just run the tube through the bilge drain and turn the valve. It otherwise just lies curled up below the engine. -robert |
Recommendation for oil change pump
On Tue, 23 Sep 2008 22:55:15 -0700 (PDT), "Robert M. Gary"
wrote: On Sep 22, 6:37*pm, Wayne.B wrote: used a hand pump for a while with one of my old sail boats. Fortunately it was a small engine with a small sump because it was a slow, hot, messy process. *Something like the Shureflo or Jabsco makes fairly easy work of it and will easily pay for itself compared to professional service prices. What do you think about the tubes that connect to the drain pan? It looks like you just run the tube through the bilge drain and turn the valve. It otherwise just lies curled up below the engine. The tubing is there to suck the oil out through the dip stick aperature. |
Recommendation for oil change pump
On Sep 24, 5:46*am, Wayne.B wrote:
The tubing is there to suck the oil out through the dip stick aperature. No, a friend of mine had the drain plug on his engine replaced with a tube. The tube is pulled through the bilge drain and there is a valve on the end. When you open the valve the oil all runs out. I was just curious about the pros/cons of this vs. sucking it out the drip stick. -Robert |
Recommendation for oil change pump
On Sep 24, 5:46*am, Wayne.B wrote:
The tubing is there to suck the oil out through the dip stick aperature. Here is a picture... http://tinyurl.com/3wdmnc -Robert |
Recommendation for oil change pump
On Wed, 24 Sep 2008 08:04:50 -0700 (PDT), "Robert M. Gary"
wrote: On Sep 24, 5:46*am, Wayne.B wrote: The tubing is there to suck the oil out through the dip stick aperature. Here is a picture... http://tinyurl.com/3wdmnc -Robert Interesting, looks like it should work but I have no experience. My only concern is that it adds a source of potential engine failure if something goes wrong with the tubing or engine fitting. |
Recommendation for oil change pump
Wayne.B wrote:
On Wed, 24 Sep 2008 08:04:50 -0700 (PDT), "Robert M. Gary" wrote: On Sep 24, 5:46 am, Wayne.B wrote: The tubing is there to suck the oil out through the dip stick aperature. Here is a picture... http://tinyurl.com/3wdmnc -Robert Interesting, looks like it should work but I have no experience. My only concern is that it adds a source of potential engine failure if something goes wrong with the tubing or engine fitting. Also requires that you snake the hose through the drain plug opening. Might be tough on some boats. |
All times are GMT +1. The time now is 10:18 AM. |
|
Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 BoatBanter.com