Well, thanks to a great RMD brother, the Mouse and I got to go try out
her new bike today. The first place we went was way too difficult for
us noobs so we headed off for the club where he is a member.

Anyway, the new TTR125 (small wheels, 14 and 17) ran pretty good but
we have some adjustments to make. Got some good pointers and ran her
out pretty good. We need to soften the rear end a little and tighten
the chain. I made some adjustments to the brake and shift levers the
other day, and they seem to work out pretty good. The Mouse really
needs some more work shifting. She tends to mark the clutch rather
than pull it in which is no so bad, but she tends to hang on the
throttle letting the engine wind up between gears. She also needs to get
a lot
deeper into the corners before slowing down, but that will come I
guess. The area we rode in today was part sand flats, and part fields
with some pretty washed out trails around. Being break in, I had her
mostly doing laps around the ovals and shifting up and down. Right at
the end of the day we could hear her coming up through some pretty
wicked wash. I wish I had the camera when she called, she was sideways
in a 2 foot deep wash with straight up side in front and behind. It
was funny to see her sitting there just like she was in a crate. Big
grin, here comes dad to save the day.. Of course then I had to walk
back too.


I got to ride the chaser bike (hard tail, old school mini bike
lawnmower engine, big fat tires) quite a while today. I was following
her around the laps prompting her through the gears and around the
ovals. Probably did more riding today than I usually do, but with the
flat tracks, it was not nearly as much work as when I ride the MX
track.. At least I got to stay on the ground most of the time


I think the guy who took us riding wanted to get out of there sooner,
and thought we would be better riders, or at least someone he could
have follow him around, but us and rocks just don't mix. It's funny
how we see trail guys come to the MX track and get intimidated.. Now
we go to the trails, and we are the same. Guess they are really two
different animals. Anyway, the Mouse loved it and wants to learn to
ride the washouts, hopefully we will get invited again, so if you are
reading this, she wants to know what we have to do to join
your club. And again, she says thank-you for the day, me too, I had a
blast...


Rowdy Mouse Racing, looking for that frekin' heating pad

Why don't you go find a motorcycle newgroup? I mean this isn't even
political which one could argue theoretically should apply to anyone.

"Rowdy Mouse Racing" wrote in message
. com...
Well, thanks to a great RMD brother, the Mouse and I got to go try out
her new bike today. The first place we went was way too difficult for
us noobs so we headed off for the club where he is a member.

Anyway, the new TTR125 (small wheels, 14 and 17) ran pretty good but
we have some adjustments to make. Got some good pointers and ran her
out pretty good. We need to soften the rear end a little and tighten
the chain. I made some adjustments to the brake and shift levers the
other day, and they seem to work out pretty good. The Mouse really
needs some more work shifting. She tends to mark the clutch rather
than pull it in which is no so bad, but she tends to hang on the
throttle letting the engine wind up between gears. She also needs to get a
lot
deeper into the corners before slowing down, but that will come I
guess. The area we rode in today was part sand flats, and part fields
with some pretty washed out trails around. Being break in, I had her
mostly doing laps around the ovals and shifting up and down. Right at
the end of the day we could hear her coming up through some pretty
wicked wash. I wish I had the camera when she called, she was sideways
in a 2 foot deep wash with straight up side in front and behind. It
was funny to see her sitting there just like she was in a crate. Big
grin, here comes dad to save the day.. Of course then I had to walk
back too.


I got to ride the chaser bike (hard tail, old school mini bike
lawnmower engine, big fat tires) quite a while today. I was following
her around the laps prompting her through the gears and around the
ovals. Probably did more riding today than I usually do, but with the
flat tracks, it was not nearly as much work as when I ride the MX
track.. At least I got to stay on the ground most of the time


I think the guy who took us riding wanted to get out of there sooner,
and thought we would be better riders, or at least someone he could
have follow him around, but us and rocks just don't mix. It's funny
how we see trail guys come to the MX track and get intimidated.. Now
we go to the trails, and we are the same. Guess they are really two
different animals. Anyway, the Mouse loved it and wants to learn to
ride the washouts, hopefully we will get invited again, so if you are
reading this, she wants to know what we have to do to join
your club. And again, she says thank-you for the day, me too, I had a
blast...


Rowdy Mouse Racing, looking for that frekin' heating pad

jamesgangnc wrote:
Why don't you go find a motorcycle newgroup? I mean this isn't even
political which one could argue theoretically should apply to anyone.

"Rowdy Mouse Racing" wrote in message
. com...
Well, thanks to a great RMD brother, the Mouse and I got to go try out
her new bike today. The first place we went was way too difficult for
us noobs so we headed off for the club where he is a member.


It doesn't even pass the who gives a schitt test.

On Sep 12, 10:06*am, "jamesgangnc" wrote:
Why don't you go find a motorcycle newgroup? *I mean this isn't even
political which one could argue theoretically should apply to anyone.

"Rowdy Mouse Racing" wrote in owhere.com...



Well, thanks to a great RMD brother, the Mouse and I got to go try out
her new bike today. The first place we went was way too difficult for
us noobs so we headed off for the club where he is a member.

Anyway, the new TTR125 (small wheels, 14 and 17) ran pretty good but
we have some adjustments to make. Got some good pointers and ran her
out pretty good. We need to soften the rear end a little and tighten
the chain. I made some adjustments to the brake and shift levers the
other day, and they seem to work out pretty good. The Mouse really
needs some more work shifting. She tends to mark the clutch rather
than pull it in which is no so bad, but she tends to hang on the
throttle letting the engine wind up between gears. She also needs to get a
lot
deeper into the corners before slowing down, but that will come I
guess. The area we rode in today was part sand flats, and part fields
with some pretty washed out trails around. Being break in, I had her
mostly doing laps around the ovals and shifting up and down. Right at
the end of the day we could hear her coming up through some pretty
wicked wash. I wish I had the camera when she called, she was sideways
in a 2 foot deep wash with straight up side in front and behind. It
was funny to see her sitting there just like she was in a crate. Big
grin, here comes dad to save the day.. Of course then I had to walk
back too.

I got to ride the chaser bike (hard tail, old school mini bike
lawnmower engine, big fat tires) quite a while today. I was following
her around the laps prompting her through the gears and around the
ovals. Probably did more riding today than I usually do, but with the
flat tracks, it was not nearly as much work as when I ride the MX
track.. At least I got to stay on the ground most of the time

I think the guy who took us riding wanted to get out of there sooner,
and thought we would be better riders, or at least someone he could
have follow him around, but us and rocks just don't mix. It's funny
how we see trail guys come to the MX track and get intimidated.. Now
we go to the trails, and we are the same. Guess they are really two
different animals. Anyway, the Mouse loved it and wants to learn to
ride the washouts, hopefully we will get invited again, so if you are
reading this, she wants to know what we have to do to join
your club. And again, she says thank-you for the day, me too, I had a
blast...

Rowdy Mouse Racing, looking for that frekin' heating pad- Hide quoted text -

- Show quoted text -

I am a member of a Motorcycle group.. I thought this post would be
better than 90% of the **** we are reading now. So, if you don't like
it and only want to deal with the penis measuring contests and
political bull****, filter me... It's easy..

wrote:
On Sep 12, 10:06 am, "jamesgangnc" wrote:
Why don't you go find a motorcycle newgroup? I mean this isn't even
political which one could argue theoretically should apply to anyone.

"Rowdy Mouse Racing" wrote in owhere.com...



Well, thanks to a great RMD brother, the Mouse and I got to go try out
her new bike today. The first place we went was way too difficult for
us noobs so we headed off for the club where he is a member.
Anyway, the new TTR125 (small wheels, 14 and 17) ran pretty good but
we have some adjustments to make. Got some good pointers and ran her
out pretty good. We need to soften the rear end a little and tighten
the chain. I made some adjustments to the brake and shift levers the
other day, and they seem to work out pretty good. The Mouse really
needs some more work shifting. She tends to mark the clutch rather
than pull it in which is no so bad, but she tends to hang on the
throttle letting the engine wind up between gears. She also needs to get a
lot
deeper into the corners before slowing down, but that will come I
guess. The area we rode in today was part sand flats, and part fields
with some pretty washed out trails around. Being break in, I had her
mostly doing laps around the ovals and shifting up and down. Right at
the end of the day we could hear her coming up through some pretty
wicked wash. I wish I had the camera when she called, she was sideways
in a 2 foot deep wash with straight up side in front and behind. It
was funny to see her sitting there just like she was in a crate. Big
grin, here comes dad to save the day.. Of course then I had to walk
back too.
I got to ride the chaser bike (hard tail, old school mini bike
lawnmower engine, big fat tires) quite a while today. I was following
her around the laps prompting her through the gears and around the
ovals. Probably did more riding today than I usually do, but with the
flat tracks, it was not nearly as much work as when I ride the MX
track.. At least I got to stay on the ground most of the time
I think the guy who took us riding wanted to get out of there sooner,
and thought we would be better riders, or at least someone he could
have follow him around, but us and rocks just don't mix. It's funny
how we see trail guys come to the MX track and get intimidated.. Now
we go to the trails, and we are the same. Guess they are really two
different animals. Anyway, the Mouse loved it and wants to learn to
ride the washouts, hopefully we will get invited again, so if you are
reading this, she wants to know what we have to do to join
your club. And again, she says thank-you for the day, me too, I had a
blast...
Rowdy Mouse Racing, looking for that frekin' heating pad- Hide quoted text -
- Show quoted text -

I am a member of a Motorcycle group.. I thought this post would be
better than 90% of the **** we are reading now. So, if you don't like
it and only want to deal with the penis measuring contests and
political bull****, filter me... It's easy..

It was a troll by someone who is upset because most people in rec.boats
are not taking the political cut and paste bait. We have a regular
crossposting to 7 different non related forums with political cut and
paste, just to stir the pot, and jamesgangnc doesn't say a word. Don't
wait for him to filter you, filter him or ignore him, it isn't worth
your effort.

wrote:

I am a member of a Motorcycle group.. I thought this post would be
better than 90% of the **** we are reading now. So, if you don't like
it and only want to deal with the penis measuring contests and
political bull****, filter me... It's easy..

You are still reading the "****"? Why?

"jim" wrote in message
...
wrote:

I am a member of a Motorcycle group.. I thought this post would be
better than 90% of the **** we are reading now. So, if you don't like
it and only want to deal with the penis measuring contests and
political bull****, filter me... It's easy..

You are still reading the "****"? Why?


I check once in a while, using another reader that is not filtered, just to
watch the antics of the resident, hypocritical, loudmouth.
He's sorta like the Dems right now ..... frustrated and in desperation mode.
It's comical to see him recruiting his pals from:

alt.machines.cnc
misc.survivalism
rec.boats
rec.crafts.metalworking
alt.impeach.bush
alt.usenet.kooks
alt.abortion

and a couple of others, trying to stir up crap.

Then, he complains of "Off Topic" posts. Hehehe.. what a jerk.

Nobody here has badmouthed him since the experiment you initiated started.
No insults, no responses to his trolls. Yet, he continues to babble away,
mostly to himself now, hurling the familiar personal insults, even though
nobody addressed him.

As he would say,

"Delicious"

Hehehehe.

Eisboch

Eisboch wrote:
"jim" wrote in message
...
wrote:

I am a member of a Motorcycle group.. I thought this post would be
better than 90% of the **** we are reading now. So, if you don't like
it and only want to deal with the penis measuring contests and
political bull****, filter me... It's easy..
You are still reading the "****"? Why?


I check once in a while, using another reader that is not filtered, just to
watch the antics of the resident, hypocritical, loudmouth.
He's sorta like the Dems right now ..... frustrated and in desperation mode.
It's comical to see him recruiting his pals from:

alt.machines.cnc
misc.survivalism
rec.boats
rec.crafts.metalworking
alt.impeach.bush
alt.usenet.kooks
alt.abortion

and a couple of others, trying to stir up crap.

Then, he complains of "Off Topic" posts. Hehehe.. what a jerk.

Nobody here has badmouthed him since the experiment you initiated started.
No insults, no responses to his trolls. Yet, he continues to babble away,
mostly to himself now, hurling the familiar personal insults, even though
nobody addressed him.

As he would say,

"Delicious"

Hehehehe.

Eisboch



Kind of an interesting mix of newsgroups he subscribes to.
Im surprised he doesn't have Alt.unskilledlabor.brickstacking
or alt.selfhelp.writingfordummies

wrote:
On Fri, 12 Sep 2008 11:47:23 -0400, "Eisboch" wrote:

"jim" wrote in message
...
wrote:

I am a member of a Motorcycle group.. I thought this post would be
better than 90% of the **** we are reading now. So, if you don't like
it and only want to deal with the penis measuring contests and
political bull****, filter me... It's easy..
You are still reading the "****"? Why?

I check once in a while, using another reader that is not filtered, just to
watch the antics of the resident, hypocritical, loudmouth.
He's sorta like the Dems right now ..... frustrated and in desperation mode.
It's comical to see him recruiting his pals from:

alt.machines.cnc
misc.survivalism
rec.boats
rec.crafts.metalworking
alt.impeach.bush
alt.usenet.kooks
alt.abortion

and a couple of others, trying to stir up crap.

Then, he complains of "Off Topic" posts. Hehehe.. what a jerk.

Nobody here has badmouthed him since the experiment you initiated started.
No insults, no responses to his trolls. Yet, he continues to babble away,
mostly to himself now, hurling the familiar personal insults, even though
nobody addressed him.

As he would say,

"Delicious"

Hehehehe.

Eisboch


Well, lookee here. Harry just got a whole post written about him. I'll
bet he feels like it's his birthday.

Excellent work, Licebot



Gosh...is it about me?

:)

I don't know why Eisboch is complaining. Ninety percent of the posts on
rec.boats were off topic and you know what, they still are. What's
different? Well, there are a few posters here from other newsgroups
*and* some of those posters don't buy into Eisboch's "corporate uber
alles" Republicanism. That must really burn his butt and the butts of
the other "capitalists" whose concern for this country ends at their wallet.

He certainly didn't complain about the golf, grandkids, motorcycle
racing and travel trailer off-topic b.s. that clogs this newsgroup. The
other day he flat out refused to post a photo of the new boat he bought.

Yeah, this is a boating newsgroup...and Sarah Palin knows enough about
foreign policy to step in if McCain is elected and he falls over dead.

wrote:
On Sep 12, 10:06 am, "jamesgangnc" wrote:
Why don't you go find a motorcycle newgroup? I mean this isn't even
political which one could argue theoretically should apply to anyone.

"Rowdy Mouse Racing" wrote in owhere.com...



Well, thanks to a great RMD brother, the Mouse and I got to go try out
her new bike today. The first place we went was way too difficult for
us noobs so we headed off for the club where he is a member.
Anyway, the new TTR125 (small wheels, 14 and 17) ran pretty good but
we have some adjustments to make. Got some good pointers and ran her
out pretty good. We need to soften the rear end a little and tighten
the chain. I made some adjustments to the brake and shift levers the
other day, and they seem to work out pretty good. The Mouse really
needs some more work shifting. She tends to mark the clutch rather
than pull it in which is no so bad, but she tends to hang on the
throttle letting the engine wind up between gears. She also needs to get a
lot
deeper into the corners before slowing down, but that will come I
guess. The area we rode in today was part sand flats, and part fields
with some pretty washed out trails around. Being break in, I had her
mostly doing laps around the ovals and shifting up and down. Right at
the end of the day we could hear her coming up through some pretty
wicked wash. I wish I had the camera when she called, she was sideways
in a 2 foot deep wash with straight up side in front and behind. It
was funny to see her sitting there just like she was in a crate. Big
grin, here comes dad to save the day.. Of course then I had to walk
back too.
I got to ride the chaser bike (hard tail, old school mini bike
lawnmower engine, big fat tires) quite a while today. I was following
her around the laps prompting her through the gears and around the
ovals. Probably did more riding today than I usually do, but with the
flat tracks, it was not nearly as much work as when I ride the MX
track.. At least I got to stay on the ground most of the time
I think the guy who took us riding wanted to get out of there sooner,
and thought we would be better riders, or at least someone he could
have follow him around, but us and rocks just don't mix. It's funny
how we see trail guys come to the MX track and get intimidated.. Now
we go to the trails, and we are the same. Guess they are really two
different animals. Anyway, the Mouse loved it and wants to learn to
ride the washouts, hopefully we will get invited again, so if you are
reading this, she wants to know what we have to do to join
your club. And again, she says thank-you for the day, me too, I had a
blast...
Rowdy Mouse Racing, looking for that frekin' heating pad- Hide quoted text -
- Show quoted text -

I am a member of a Motorcycle group.. I thought this post would be
better than 90% of the **** we are reading now. So, if you don't like
it and only want to deal with the penis measuring contests and
political bull****, filter me... It's easy..


Why would you think kiddie motorcycle racing would be interesting to a
newsgroup supposedly devoted to recreational boating?