Painting a boat..
 

Well, we got the sanding done and painted the inside of the Brockway
yesterday. Battleship grey was in the Goof isle at Home Depot,
perfect, flat, nice. It was pretty hot so I had to move quickly, but I
was using a power roller with a pad attachment too. Great for doing
the inside, does a much better job than the sprayers I have used in
the past. Rollers with a "tip" method brush is still the best way to
go for wood boats.

Time today to flip her over and do the bottom, that will be much
easier.

Later, Scotty

Painting a boat..
 

Painting a boat..
 

On Sep 4, 11:34*am, hk wrote:
wrote:
Well, we got the sanding done and painted the inside of the Brockway
yesterday. Battleship grey was in the Goof isle at Home Depot,
perfect, flat, nice. It was pretty hot so I had to move quickly, but I
was using a power roller with a pad attachment too. Great for doing
the inside, does a much better job than the sprayers I have used in
the past. Rollers with a "tip" method brush is still the best way to
go for wood boats.

Time today to flip her over and do the bottom, that will be much
easier.

Later, Scotty

You used flat house paint on a boat? *:)

Since you really don't know what you are talking about here I will
note that Enamel is Enamel, is Enamel. Let me know when a chemist
comese up with a better Enamel, K? A real boat builder explained that
to me years ago. You don't spend 400 bucks to paint a plywood boat, it
would be silly...

When I was painting wood boats, and I did a whole lot of that, since it
was the job for the relatively unskilled at the boat yard (this was
before the days of high tech paint),

You do realize that "marine" paint is inspected and tested for it's
intended use, but it's still just paint, right? I have no problem
using Benjamin Moore or Pittsburgh on the interior of a boat, it is
well made, and breathes nicely. Bet Google didn't tell you that..

we used nice brushes to put on
paint, not rollers, so we could work in the paint. We even brushed on
bottom paint on the smaller boats.

Since you really never painted or built a wooden boat, I suggest you
look up "tip" method of "brushing" paint, which I used here... Yes, a
Purdy 3" angle, it's all I ever use or need to follow the rollers..

But, if you're using flat house paint, it'll flake off soon enough...so
I guess it doesn't make a difference.

Uh, on the inside of the boat, it is fine, I have never had any
problems and unlike you, I have built nearly 60 boats and painted at
least half of them...

I

At least you got the aisle right, eh?

BTW, the word "isle" usually is used in reference to an geographical
island...a land mass surrounded by water.

BFD, you have google and a spellchecker, still doesn't make you an
expert on anything but bull****. Since it is clear you don't even
really know the simple basics of work skiffs, your followups will be
ignored, unless you can squeak out a serious question that is not
loaded or a troll... unlikely..

Scotty from SmallBoats.com

Painting a boat..
 

"hk" wrote in message
. ..
wrote:
Well, we got the sanding done and painted the inside of the Brockway
yesterday. Battleship grey was in the Goof isle at Home Depot,
perfect, flat, nice. It was pretty hot so I had to move quickly, but I
was using a power roller with a pad attachment too. Great for doing
the inside, does a much better job than the sprayers I have used in
the past. Rollers with a "tip" method brush is still the best way to
go for wood boats.

Time today to flip her over and do the bottom, that will be much
easier.

Later, Scotty


You used flat house paint on a boat? :)

When I was painting wood boats, and I did a whole lot of that, since it
was the job for the relatively unskilled at the boat yard (this was before
the days of high tech paint), we used nice brushes to put on paint, not
rollers, so we could work in the paint. We even brushed on bottom paint on
the smaller boats.

But, if you're using flat house paint, it'll flake off soon enough...so I
guess it doesn't make a difference.

At least you got the aisle right, eh?

BTW, the word "isle" usually is used in reference to an geographical
island...a land mass surrounded by water.


I hope it was at least 'oil based' paint.

Painting a boat..
 

Painting a boat..
 

On Thu, 4 Sep 2008 08:46:38 -0700 (PDT),
wrote:

On Sep 4, 11:34*am, hk wrote:
wrote:
Well, we got the sanding done and painted the inside of the Brockway
yesterday. Battleship grey was in the Goof isle at Home Depot,
perfect, flat, nice. It was pretty hot so I had to move quickly, but I
was using a power roller with a pad attachment too. Great for doing
the inside, does a much better job than the sprayers I have used in
the past. Rollers with a "tip" method brush is still the best way to
go for wood boats.

Time today to flip her over and do the bottom, that will be much
easier.

Later, Scotty

You used flat house paint on a boat? *:)

Since you really don't know what you are talking about here I will
note that Enamel is Enamel, is Enamel.

Hoo-boy, are you ever wrong.

Painting a boat..
 

On Sep 4, 12:07*pm, hk wrote:
wrote:
On Sep 4, 11:34 am, hk wrote:
wrote:
Well, we got the sanding done and painted the inside of the Brockway
yesterday. Battleship grey was in the Goof isle at Home Depot,
perfect, flat, nice. It was pretty hot so I had to move quickly, but I
was using a power roller with a pad attachment too. Great for doing
the inside, does a much better job than the sprayers I have used in
the past. Rollers with a "tip" method brush is still the best way to
go for wood boats.
Time today to flip her over and do the bottom, that will be much
easier.
Later, Scotty
You used flat house paint on a boat? *:)

Since you really don't know what you are talking about here I will
note that Enamel is Enamel, is Enamel. Let me know when a chemist
comese up with a better Enamel, K? A real boat builder explained that
to me years ago. You don't spend 400 bucks to paint a plywood boat, it
would be silly...
When I was painting wood boats, and I did a whole lot of that, since it
was the job for the relatively unskilled at the boat yard (this was
before the days of high tech paint),

You do realize that "marine" paint is inspected and tested for it's
intended use, but it's still just paint, right? I have no problem
using Benjamin Moore or Pittsburgh on the interior of a boat, it is
well made, and breathes nicely. Bet Google didn't tell you that..

we used nice brushes to put on
paint, not rollers, so we could work in the paint. We even brushed on
bottom paint on the smaller boats.

Since you really never painted or built a wooden boat, I suggest you
look up "tip" method of "brushing" paint, which I used here... Yes, a
Purdy 3" angle, it's all I ever use or need to follow the rollers..
But, if you're using flat house paint, it'll flake off soon enough...so
I guess it doesn't make a difference.

Uh, on the inside of the boat, it is fine, I have never had any
problems and unlike you, I have built nearly 60 boats and painted at
least half of them...

I
At least you got the aisle right, eh?

BTW, the word "isle" usually is used in reference to an geographical
island...a land mass surrounded by water.

BFD, you have google and a spellchecker, still doesn't make you an
expert on anything but bull****. Since it is clear you don't even
really know the simple basics of work skiffs, your followups will be
ignored, unless you can squeak out a serious question that is not
loaded or a troll... unlikely..

Scotty from SmallBoats.com

1. I saw the photos of that Brockway skiff, and thought it exhibited one
of the worst paint jobs I have ever seen on a small boat. It was sloppy,
with overlaps, and the grey paint on the floor was peeling off in many
places. If I ever painted one of my father's customer's boats as poorly
as you painted that skiff, he'd have gone through the roof. Don't you
have a roll of masking tape?

2. I don't use an external spellchecker here or anywhere else.
I do use the spellchecker in my head when it matters.

3. A lot of my father's trade when he was in the boat business was work
skiffs, including actual skiffs from a company in Greenwich or Norwalk
named "Skimmar" or something like that (long gone, I am sure), plywood
skiffs the guys in the shop built in the winter, and Amesbury dories
from Stur-Dee. **All* of those boats, the factory-built ones and the
shopbuilt ones, exhibited more quality and certainly a better paint job
than anything I have seen from you.

Perhaps your problem with the paint jobs is that you don't have steady
hands. That wouldn't surprise me.- Hide quoted text -

- Show quoted text -

Yeah, but there is no evidence that your dad ever owned a shop, or
that you have built any boats, you are a wordsmith, and a dishonest
one at that.

Anyway, Tipping is a technique developed for the new high end poly or
epoxy paints, especially. It involves applying the paint with a roller
for speed coverage and fill. As soon as you start to see a reaction,
you follow with very light pressure and the brush at 90 degrees to the
work, one pass, in one direction. This allows the paint to flow again
but at a slower pace. If done correctly, it can produce a better
surface than even some spray methods.

Power painters, rollers, spray, etc. are used for application only.
It's just a lot easier than dipping and dipping, then switching to a
dry brush for tipping. HVLP works great for outside and the lighter
based, poly/epoxy paints. High pressure or a couple of various size
rollers do great inside near the framework. Being a work skiff, this
boat has some rough edges here and there, so I use disposable rollers.
The little pink ones (6" x 1") I find to work best.

Runs, drips, egos.. no time here, this is a tool. Paint is a part of
the tool, the tool will work just as well with a couple of drips. We
are talking a hull with a total material cost of under 400 dollars. As
many of you may have seen from last years vids, the kids and fish
didn't mind the flaws...;)

Painting a boat..
 

Painting a boat..
 

On Thu, 4 Sep 2008 09:48:29 -0700 (PDT),
wrote:


Anyway, Tipping is a technique developed for the new high end poly or
epoxy paints, especially.

There is nothing even remotely "new" about roll and tip painting.

Painting a boat..
 

On Sep 4, 12:55*pm, hk wrote:
wrote:
On Sep 4, 12:07 pm, hk wrote:
wrote:
On Sep 4, 11:34 am, hk wrote:
Yeah, but there is no evidence that your dad ever owned a shop, or
that you have built any boats, you are a wordsmith, and a dishonest
one at that.

Well, that's a laugh. I shut the business down in the early 1970's and
sold off the real estate. I only know a couple of guys still living in
the general area who knew my father. Neither will waste a second of
their days talking to someone like you.`

You know somebody, who knows sombody huh? We have heard that before
from you... Lobsta' boat...
`

Anyway,...

(nonsense clipped.

Runs, drips, egos.. no time here, this is a tool. Paint is a part of
the tool, the tool will work just as well with a couple of drips.

As I stated, you are sloppy.

Lobsta' boat

http://smallboats.com/boats_cartopper.htm

Painting a boat..
 

Painting a boat..
 

Ok, I am picking up this thread at Genes, with my agent. I have salty
and harry blocked here, so we can have a discussion...



On Thu, 4 Sep 2008 12:48:50 -0300, "Don White"
wrote:


"hk" wrote in message
...
wrote:
Well, we got the sanding done and painted the inside of the Brockway
yesterday. Battleship grey was in the Goof isle at Home Depot,
perfect, flat, nice. It was pretty hot so I had to move quickly, but I
was using a power roller with a pad attachment too. Great for doing
the inside, does a much better job than the sprayers I have used in
the past. Rollers with a "tip" method brush is still the best way to
go for wood boats.

Time today to flip her over and do the bottom, that will be much
easier.

Later, Scotty


You used flat house paint on a boat? :)

When I was painting wood boats, and I did a whole lot of that, since it
was the job for the relatively unskilled at the boat yard (this was before
the days of high tech paint), we used nice brushes to put on paint, not
rollers, so we could work in the paint. We even brushed on bottom paint on
the smaller boats.

But, if you're using flat house paint, it'll flake off soon enough...so I
guess it doesn't make a difference.

At least you got the aisle right, eh?

BTW, the word "isle" usually is used in reference to an geographical
island...a land mass surrounded by water.


I hope it was at least 'oil based' paint.

Painting a boat..
 

SmallBoats.com wrote:
Ok, I am picking up this thread at Genes, with my agent. I have salty
and harry blocked here, so we can have a discussion...



With who? Those who know less about painting than you do?
That would be a small group indeed.

The problem is you. You're sloppy.

Painting a boat..
 

On Sep 4, 11:34*am, hk wrote:
wrote:
Well, we got the sanding done and painted the inside of the Brockway
yesterday. Battleship grey was in the Goof isle at Home Depot,
perfect, flat, nice. It was pretty hot so I had to move quickly, but I
was using a power roller with a pad attachment too. Great for doing
the inside, does a much better job than the sprayers I have used in
the past. Rollers with a "tip" method brush is still the best way to
go for wood boats.

Time today to flip her over and do the bottom, that will be much
easier.

Later, Scotty

You used flat house paint on a boat? *:)

When I was painting wood boats, and I did a whole lot of that, since it
was the job for the relatively unskilled at the boat yard (this was
before the days of high tech paint), we used nice brushes to put on
paint, not rollers, so we could work in the paint. We even brushed on
bottom paint on the smaller boats.

But, if you're using flat house paint, it'll flake off soon enough...so
I guess it doesn't make a difference.

At least you got the aisle right, eh?

BTW, the word "isle" usually is used in reference to an geographical
island...a land mass surrounded by water.

Where in hell did he say he used house paint, dip****?
Also, I take it you've never heard of the tip method.

Painting a boat..
 

On Sep 4, 12:55*pm, hk wrote:
wrote:
On Sep 4, 12:07 pm, hk wrote:
wrote:
On Sep 4, 11:34 am, hk wrote:
Yeah, but there is no evidence that your dad ever owned a shop, or
that you have built any boats, you are a wordsmith, and a dishonest
one at that.

Well, that's a laugh. I shut the business down in the early 1970's and
sold off the real estate. I only know a couple of guys still living in
the general area who knew my father. Neither will waste a second of
their days talking to someone like you.`

Another list of lies. Prove ANY of it. I dare you.
`

Anyway,...

(nonsense clipped.

Runs, drips, egos.. no time here, this is a tool. Paint is a part of
the tool, the tool will work just as well with a couple of drips.

As I stated, you are sloppy.

Harry, the fat nail chewing low life of rec.boats calling someone else
sloppy!!!!!!

Painting a boat..
 

On Sep 4, 1:10*pm, hk wrote:
wrote:
On Sep 4, 12:55 pm, hk wrote:
wrote:
On Sep 4, 12:07 pm, hk wrote:
wrote:
On Sep 4, 11:34 am, hk wrote:
Yeah, but there is no evidence that your dad ever owned a shop, or
that you have built any boats, you are a wordsmith, and a dishonest
one at that.
Well, that's a laugh. I shut the business down in the early 1970's and
sold off the real estate. I only know a couple of guys still living in
the general area who knew my father. Neither will waste a second of
their days talking to someone like you.`

You know somebody, who knows sombody huh? We have heard that before
from you... Lobsta' boat...

You really are an ill-educated, unsophisticated boor. My father died in
1973, about 35 years ago, when he was in his early 60's. How many of his
buddies do you think might be alive today?

`

Anyway,...
(nonsense clipped.

Runs, drips, egos.. no time here, this is a tool. Paint is a part of
the tool, the tool will work just as well with a couple of drips.
As I stated, you are sloppy.

Lobsta' boat

D'oh. It remains that you are a sloppy workman. I wouldn't trust your
abilities to build a shoebox.- Hide quoted text -

- Show quoted text -

Lobster boat.

Painting a boat..
 

On Thu, 4 Sep 2008 10:31:41 -0700 (PDT), wrote:

On Sep 4, 1:10*pm, hk wrote:
wrote:
On Sep 4, 12:55 pm, hk wrote:
wrote:
On Sep 4, 12:07 pm, hk wrote:
wrote:
On Sep 4, 11:34 am, hk wrote:
Yeah, but there is no evidence that your dad ever owned a shop, or
that you have built any boats, you are a wordsmith, and a dishonest
one at that.
Well, that's a laugh. I shut the business down in the early 1970's and
sold off the real estate. I only know a couple of guys still living in
the general area who knew my father. Neither will waste a second of
their days talking to someone like you.`

You know somebody, who knows sombody huh? We have heard that before
from you... Lobsta' boat...

You really are an ill-educated, unsophisticated boor. My father died in
1973, about 35 years ago, when he was in his early 60's. How many of his
buddies do you think might be alive today?

`

Anyway,...
(nonsense clipped.

Runs, drips, egos.. no time here, this is a tool. Paint is a part of
the tool, the tool will work just as well with a couple of drips.
As I stated, you are sloppy.

Lobsta' boat

D'oh. It remains that you are a sloppy workman. I wouldn't trust your
abilities to build a shoebox.- Hide quoted text -

- Show quoted text -

Lobster boat.

Rosebud

Painting a boat..
 

On Sep 4, 1:43*pm, wrote:
On Thu, 4 Sep 2008 10:31:41 -0700 (PDT), wrote:
On Sep 4, 1:10*pm, hk wrote:
wrote:
On Sep 4, 12:55 pm, hk wrote:
wrote:
On Sep 4, 12:07 pm, hk wrote:
wrote:
On Sep 4, 11:34 am, hk wrote:
Yeah, but there is no evidence that your dad ever owned a shop, or
that you have built any boats, you are a wordsmith, and a dishonest
one at that.
Well, that's a laugh. I shut the business down in the early 1970's and
sold off the real estate. I only know a couple of guys still living in
the general area who knew my father. Neither will waste a second of
their days talking to someone like you.`

You know somebody, who knows sombody huh? We have heard that before
from you... Lobsta' boat...

You really are an ill-educated, unsophisticated boor. My father died in
1973, about 35 years ago, when he was in his early 60's. How many of his
buddies do you think might be alive today?

`

Anyway,...
(nonsense clipped.

Runs, drips, egos.. no time here, this is a tool. Paint is a part of
the tool, the tool will work just as well with a couple of drips.
As I stated, you are sloppy.

Lobsta' boat

D'oh. It remains that you are a sloppy workman. I wouldn't trust your
abilities to build a shoebox.- Hide quoted text -

- Show quoted text -

Lobster boat.

Rosebud- Hide quoted text -

- Show quoted text -

You're getting it! It's bull****!

Painting a boat..
 

On Thu, 4 Sep 2008 08:23:39 -0700 (PDT),
wrote:

Well, we got the sanding done and painted the inside of the Brockway
yesterday. Battleship grey was in the Goof isle at Home Depot,
perfect, flat, nice. It was pretty hot so I had to move quickly, but I
was using a power roller with a pad attachment too. Great for doing
the inside, does a much better job than the sprayers I have used in
the past. Rollers with a "tip" method brush is still the best way to
go for wood boats.

Time today to flip her over and do the bottom, that will be much
easier.

Later, Scotty

WHERE ARE THE FRIGGIN' PICTURES?

Are they at Chuck's Island? If not, please put them there!

Painting a boat..
 

On Sep 4, 1:29*pm, wrote:
On Sep 4, 11:34*am, hk wrote:





wrote:
Well, we got the sanding done and painted the inside of the Brockway
yesterday. Battleship grey was in the Goof isle at Home Depot,
perfect, flat, nice. It was pretty hot so I had to move quickly, but I
was using a power roller with a pad attachment too. Great for doing
the inside, does a much better job than the sprayers I have used in
the past. Rollers with a "tip" method brush is still the best way to
go for wood boats.

Time today to flip her over and do the bottom, that will be much
easier.

Later, Scotty

You used flat house paint on a boat? *:)

When I was painting wood boats, and I did a whole lot of that, since it
was the job for the relatively unskilled at the boat yard (this was
before the days of high tech paint), we used nice brushes to put on
paint, not rollers, so we could work in the paint. We even brushed on
bottom paint on the smaller boats.

But, if you're using flat house paint, it'll flake off soon enough...so
I guess it doesn't make a difference.

At least you got the aisle right, eh?

BTW, the word "isle" usually is used in reference to an geographical
island...a land mass surrounded by water.

Where in hell did he say he used house paint, dip****?
Also, I take it you've never heard of the tip method.- Hide quoted text -

- Show quoted text -

But I did use housepaint, It's a plywood work boat, it just needs to
breathe...

Painting a boat..
 

Painting a boat..
 

Painting a boat..
 

SmallBoats.com wrote:
Ok, I am picking up this thread at Genes, with my agent. I have salty
and harry blocked here, so we can have a discussion...



On Thu, 4 Sep 2008 12:48:50 -0300, "Don White"
wrote:

"hk" wrote in message
. ..
wrote:
Well, we got the sanding done and painted the inside of the Brockway
yesterday. Battleship grey was in the Goof isle at Home Depot,
perfect, flat, nice. It was pretty hot so I had to move quickly, but I
was using a power roller with a pad attachment too. Great for doing
the inside, does a much better job than the sprayers I have used in
the past. Rollers with a "tip" method brush is still the best way to
go for wood boats.

Time today to flip her over and do the bottom, that will be much
easier.

Later, Scotty

You used flat house paint on a boat? :)

When I was painting wood boats, and I did a whole lot of that, since it
was the job for the relatively unskilled at the boat yard (this was before
the days of high tech paint), we used nice brushes to put on paint, not
rollers, so we could work in the paint. We even brushed on bottom paint on
the smaller boats.

But, if you're using flat house paint, it'll flake off soon enough...so I
guess it doesn't make a difference.

At least you got the aisle right, eh?

BTW, the word "isle" usually is used in reference to an geographical
island...a land mass surrounded by water.

I hope it was at least 'oil based' paint.


Well you *are* top posting, but you are also illustrating that Donnie
"the dip****" isn't getting any smarter. And a one-liner, too? Who
would have thought??

Painting a boat..
 

On Thu, 04 Sep 2008 15:09:28 -0400, John H wrote:

On Thu, 4 Sep 2008 08:23:39 -0700 (PDT),
wrote:

Well, we got the sanding done and painted the inside of the Brockway
yesterday. Battleship grey was in the Goof isle at Home Depot,
perfect, flat, nice. It was pretty hot so I had to move quickly, but I
was using a power roller with a pad attachment too. Great for doing
the inside, does a much better job than the sprayers I have used in
the past. Rollers with a "tip" method brush is still the best way to
go for wood boats.

Time today to flip her over and do the bottom, that will be much
easier.

Later, Scotty

WHERE ARE THE FRIGGIN' PICTURES?

Are they at Chuck's Island? If not, please put them there!

I figured I might let all the google experts and friends of friends
tell us what they have found.. Apparently, my experiences don't fall
in line.. ;) Everybody is an expert already...

Painting a boat..
 

On Thu, 04 Sep 2008 22:57:02 -0400, SmallBoats.com
wrote:

On Thu, 04 Sep 2008 15:09:28 -0400, John H wrote:

On Thu, 4 Sep 2008 08:23:39 -0700 (PDT),
wrote:

Well, we got the sanding done and painted the inside of the Brockway
yesterday. Battleship grey was in the Goof isle at Home Depot,
perfect, flat, nice. It was pretty hot so I had to move quickly, but I
was using a power roller with a pad attachment too. Great for doing
the inside, does a much better job than the sprayers I have used in
the past. Rollers with a "tip" method brush is still the best way to
go for wood boats.

Time today to flip her over and do the bottom, that will be much
easier.

Later, Scotty

WHERE ARE THE FRIGGIN' PICTURES?

Are they at Chuck's Island? If not, please put them there!

I figured I might let all the google experts and friends of friends
tell us what they have found.. Apparently, my experiences don't fall
in line.. ;) Everybody is an expert already...

Bull****. Show us the pictures already. Fugabuncha 'experts' like krause
and his kittens.

Painting a boat..
 

On Sep 4, 3:15*pm, wrote:
On Sep 4, 1:29*pm, wrote:





On Sep 4, 11:34*am, hk wrote:

wrote:
Well, we got the sanding done and painted the inside of the Brockway
yesterday. Battleship grey was in the Goof isle at Home Depot,
perfect, flat, nice. It was pretty hot so I had to move quickly, but I
was using a power roller with a pad attachment too. Great for doing
the inside, does a much better job than the sprayers I have used in
the past. Rollers with a "tip" method brush is still the best way to
go for wood boats.

Time today to flip her over and do the bottom, that will be much
easier.

Later, Scotty

You used flat house paint on a boat? *:)

When I was painting wood boats, and I did a whole lot of that, since it
was the job for the relatively unskilled at the boat yard (this was
before the days of high tech paint), we used nice brushes to put on
paint, not rollers, so we could work in the paint. We even brushed on
bottom paint on the smaller boats.

But, if you're using flat house paint, it'll flake off soon enough...so
I guess it doesn't make a difference.

At least you got the aisle right, eh?

BTW, the word "isle" usually is used in reference to an geographical
island...a land mass surrounded by water.

Where in hell did he say he used house paint, dip****?
Also, I take it you've never heard of the tip method.- Hide quoted text -

- Show quoted text -

But I did use housepaint, It's a plywood work boat, it just needs to
breathe...- Hide quoted text -

- Show quoted text -

That may well be, but the fact is, Harry was making, as usual an
ASSumption based on.....nothing.

Painting a boat..
 

On Fri, 5 Sep 2008 05:42:22 -0700 (PDT), wrote:

On Sep 4, 3:15*pm, wrote:
On Sep 4, 1:29*pm, wrote:





On Sep 4, 11:34*am, hk wrote:

wrote:
Well, we got the sanding done and painted the inside of the Brockway
yesterday. Battleship grey was in the Goof isle at Home Depot,
perfect, flat, nice. It was pretty hot so I had to move quickly, but I
was using a power roller with a pad attachment too. Great for doing
the inside, does a much better job than the sprayers I have used in
the past. Rollers with a "tip" method brush is still the best way to
go for wood boats.

Time today to flip her over and do the bottom, that will be much
easier.

Later, Scotty

You used flat house paint on a boat? *:)

When I was painting wood boats, and I did a whole lot of that, since it
was the job for the relatively unskilled at the boat yard (this was
before the days of high tech paint), we used nice brushes to put on
paint, not rollers, so we could work in the paint. We even brushed on
bottom paint on the smaller boats.

But, if you're using flat house paint, it'll flake off soon enough...so
I guess it doesn't make a difference.

At least you got the aisle right, eh?

BTW, the word "isle" usually is used in reference to an geographical
island...a land mass surrounded by water.

Where in hell did he say he used house paint, dip****?
Also, I take it you've never heard of the tip method.- Hide quoted text -

- Show quoted text -

But I did use housepaint, It's a plywood work boat, it just needs to
breathe...- Hide quoted text -

- Show quoted text -

That may well be, but the fact is, Harry was making, as usual an
ASSumption based on.....nothing.

House paint is pretty much all they sell in the goof aisle of Home
Depot. It was a pretty safe assumption.

Painting a boat..
 

On Sep 4, 3:23*pm, hk wrote:
wrote:
On Sep 4, 1:29 pm, wrote:
On Sep 4, 11:34 am, hk wrote:

wrote:
Well, we got the sanding done and painted the inside of the Brockway
yesterday. Battleship grey was in the Goof isle at Home Depot,
perfect, flat, nice. It was pretty hot so I had to move quickly, but I
was using a power roller with a pad attachment too. Great for doing
the inside, does a much better job than the sprayers I have used in
the past. Rollers with a "tip" method brush is still the best way to
go for wood boats.
Time today to flip her over and do the bottom, that will be much
easier.
Later, Scotty
You used flat house paint on a boat? *:)
When I was painting wood boats, and I did a whole lot of that, since it
was the job for the relatively unskilled at the boat yard (this was
before the days of high tech paint), we used nice brushes to put on
paint, not rollers, so we could work in the paint. We even brushed on
bottom paint on the smaller boats.
But, if you're using flat house paint, it'll flake off soon enough...so
I guess it doesn't make a difference.
At least you got the aisle right, eh?
BTW, the word "isle" usually is used in reference to an geographical
island...a land mass surrounded by water.
Where in hell did he say he used house paint, dip****?
Also, I take it you've never heard of the tip method.- Hide quoted text -

- Show quoted text -

But I did use housepaint, It's a plywood work boat, it just needs to
breathe...

We always used Petit boat paint on our plywood boats.- Hide quoted text -

- Show quoted text -

No you didn't, or you would have said it yesterday. Everyone knows you
google every attack.... Lobsta' boat.. You never built a boat,
probably never painted one either....

Painting a boat..
 

On Fri, 5 Sep 2008 06:22:46 -0700 (PDT),
wrote:

On Sep 4, 3:23*pm, hk wrote:
wrote:
On Sep 4, 1:29 pm, wrote:
On Sep 4, 11:34 am, hk wrote:

wrote:
Well, we got the sanding done and painted the inside of the Brockway
yesterday. Battleship grey was in the Goof isle at Home Depot,
perfect, flat, nice. It was pretty hot so I had to move quickly, but I
was using a power roller with a pad attachment too. Great for doing
the inside, does a much better job than the sprayers I have used in
the past. Rollers with a "tip" method brush is still the best way to
go for wood boats.
Time today to flip her over and do the bottom, that will be much
easier.
Later, Scotty
You used flat house paint on a boat? *:)
When I was painting wood boats, and I did a whole lot of that, since it
was the job for the relatively unskilled at the boat yard (this was
before the days of high tech paint), we used nice brushes to put on
paint, not rollers, so we could work in the paint. We even brushed on
bottom paint on the smaller boats.
But, if you're using flat house paint, it'll flake off soon enough...so
I guess it doesn't make a difference.
At least you got the aisle right, eh?
BTW, the word "isle" usually is used in reference to an geographical
island...a land mass surrounded by water.
Where in hell did he say he used house paint, dip****?
Also, I take it you've never heard of the tip method.- Hide quoted text -

- Show quoted text -

But I did use housepaint, It's a plywood work boat, it just needs to
breathe...

We always used Petit boat paint on our plywood boats.- Hide quoted text -

- Show quoted text -

No you didn't, or you would have said it yesterday. Everyone knows you
google every attack.... Lobsta' boat.. You never built a boat,
probably never painted one either....

But he keeps pulling your chain!

Where are the pictures? I posted mine, now you post yours.

Painting a boat..
 

On Sep 5, 9:09*am, wrote:
On Fri, 5 Sep 2008 05:42:22 -0700 (PDT), wrote:
On Sep 4, 3:15*pm, wrote:
On Sep 4, 1:29*pm, wrote:

On Sep 4, 11:34*am, hk wrote:

wrote:
Well, we got the sanding done and painted the inside of the Brockway
yesterday. Battleship grey was in the Goof isle at Home Depot,
perfect, flat, nice. It was pretty hot so I had to move quickly, but I
was using a power roller with a pad attachment too. Great for doing
the inside, does a much better job than the sprayers I have used in
the past. Rollers with a "tip" method brush is still the best way to
go for wood boats.

Time today to flip her over and do the bottom, that will be much
easier.

Later, Scotty

You used flat house paint on a boat? *:)

When I was painting wood boats, and I did a whole lot of that, since it
was the job for the relatively unskilled at the boat yard (this was
before the days of high tech paint), we used nice brushes to put on
paint, not rollers, so we could work in the paint. We even brushed on
bottom paint on the smaller boats.

But, if you're using flat house paint, it'll flake off soon enough....so
I guess it doesn't make a difference.

At least you got the aisle right, eh?

BTW, the word "isle" usually is used in reference to an geographical
island...a land mass surrounded by water.

Where in hell did he say he used house paint, dip****?
Also, I take it you've never heard of the tip method.- Hide quoted text -

- Show quoted text -

But I did use housepaint, It's a plywood work boat, it just needs to
breathe...- Hide quoted text -

- Show quoted text -

That may well be, but the fact is, Harry was making, as usual an
ASSumption based on.....nothing.

House paint is pretty much all they sell in the goof aisle of Home
Depot. It was a pretty safe assumption.- Hide quoted text -

- Show quoted text -

Not at my Home Depot. There's all types of paint there.

Painting a boat..
 

On Fri, 5 Sep 2008 06:46:34 -0700 (PDT), wrote:

On Sep 5, 9:09*am, wrote:
On Fri, 5 Sep 2008 05:42:22 -0700 (PDT), wrote:
On Sep 4, 3:15*pm, wrote:
On Sep 4, 1:29*pm, wrote:

On Sep 4, 11:34*am, hk wrote:

wrote:
Well, we got the sanding done and painted the inside of the Brockway
yesterday. Battleship grey was in the Goof isle at Home Depot,
perfect, flat, nice. It was pretty hot so I had to move quickly, but I
was using a power roller with a pad attachment too. Great for doing
the inside, does a much better job than the sprayers I have used in
the past. Rollers with a "tip" method brush is still the best way to
go for wood boats.

Time today to flip her over and do the bottom, that will be much
easier.

Later, Scotty

You used flat house paint on a boat? *:)

When I was painting wood boats, and I did a whole lot of that, since it
was the job for the relatively unskilled at the boat yard (this was
before the days of high tech paint), we used nice brushes to put on
paint, not rollers, so we could work in the paint. We even brushed on
bottom paint on the smaller boats.

But, if you're using flat house paint, it'll flake off soon enough...so
I guess it doesn't make a difference.

At least you got the aisle right, eh?

BTW, the word "isle" usually is used in reference to an geographical
island...a land mass surrounded by water.

Where in hell did he say he used house paint, dip****?
Also, I take it you've never heard of the tip method.- Hide quoted text -

- Show quoted text -

But I did use housepaint, It's a plywood work boat, it just needs to
breathe...- Hide quoted text -

- Show quoted text -

That may well be, but the fact is, Harry was making, as usual an
ASSumption based on.....nothing.

House paint is pretty much all they sell in the goof aisle of Home
Depot. It was a pretty safe assumption.- Hide quoted text -

- Show quoted text -

Not at my Home Depot. There's all types of paint there.

Artists watercolors? Automotive lacquer? Anti-fouling Bottom paint?
Model airplane enamels? In the goof aisle? Really?

Here's a clue, dopetard - The name of the place is H-O-M-E Depot.
Pretty damned clever of them, eh?

Painting a boat..
 

On Sep 5, 12:05*pm, wrote:
On Fri, 5 Sep 2008 06:46:34 -0700 (PDT), wrote:
On Sep 5, 9:09*am, wrote:
On Fri, 5 Sep 2008 05:42:22 -0700 (PDT), wrote:
On Sep 4, 3:15*pm, wrote:
On Sep 4, 1:29*pm, wrote:

On Sep 4, 11:34*am, hk wrote:

wrote:
Well, we got the sanding done and painted the inside of the Brockway
yesterday. Battleship grey was in the Goof isle at Home Depot,
perfect, flat, nice. It was pretty hot so I had to move quickly, but I
was using a power roller with a pad attachment too. Great for doing
the inside, does a much better job than the sprayers I have used in
the past. Rollers with a "tip" method brush is still the best way to
go for wood boats.

Time today to flip her over and do the bottom, that will be much
easier.

Later, Scotty

You used flat house paint on a boat? *:)

When I was painting wood boats, and I did a whole lot of that, since it
was the job for the relatively unskilled at the boat yard (this was
before the days of high tech paint), we used nice brushes to put on
paint, not rollers, so we could work in the paint. We even brushed on
bottom paint on the smaller boats.

But, if you're using flat house paint, it'll flake off soon enough...so
I guess it doesn't make a difference.

At least you got the aisle right, eh?

BTW, the word "isle" usually is used in reference to an geographical
island...a land mass surrounded by water.

Where in hell did he say he used house paint, dip****?
Also, I take it you've never heard of the tip method.- Hide quoted text -

- Show quoted text -

But I did use housepaint, It's a plywood work boat, it just needs to
breathe...- Hide quoted text -

- Show quoted text -

That may well be, but the fact is, Harry was making, as usual an
ASSumption based on.....nothing.

House paint is pretty much all they sell in the goof aisle of Home
Depot. It was a pretty safe assumption.- Hide quoted text -

- Show quoted text -

Not at my Home Depot. There's all types of paint there.

Artists watercolors? Automotive lacquer? Anti-fouling Bottom paint?
Model airplane enamels? In the goof aisle? Really?

Here's a clue, dopetard - The name of the place is H-O-M-E Depot.
Pretty damned clever of them, eh?- Hide quoted text -

- Show quoted text -

Where did I say exactly what other paints were available there, idiot?
Are you really saying that each and every item Home Depot sells must
be for a home? I wonder where in my house I'll use the receiver hitch
I bought there, as well as the marine carpet moron......

Painting a boat..
 

On Fri, 5 Sep 2008 10:06:14 -0700 (PDT), wrote:

On Sep 5, 12:05*pm, wrote:
On Fri, 5 Sep 2008 06:46:34 -0700 (PDT), wrote:
On Sep 5, 9:09*am, wrote:
On Fri, 5 Sep 2008 05:42:22 -0700 (PDT), wrote:
On Sep 4, 3:15*pm, wrote:
On Sep 4, 1:29*pm, wrote:

On Sep 4, 11:34*am, hk wrote:

wrote:
Well, we got the sanding done and painted the inside of the Brockway
yesterday. Battleship grey was in the Goof isle at Home Depot,
perfect, flat, nice. It was pretty hot so I had to move quickly, but I
was using a power roller with a pad attachment too. Great for doing
the inside, does a much better job than the sprayers I have used in
the past. Rollers with a "tip" method brush is still the best way to
go for wood boats.

Time today to flip her over and do the bottom, that will be much
easier.

Later, Scotty

You used flat house paint on a boat? *:)

When I was painting wood boats, and I did a whole lot of that, since it
was the job for the relatively unskilled at the boat yard (this was
before the days of high tech paint), we used nice brushes to put on
paint, not rollers, so we could work in the paint. We even brushed on
bottom paint on the smaller boats.

But, if you're using flat house paint, it'll flake off soon enough...so
I guess it doesn't make a difference.

At least you got the aisle right, eh?

BTW, the word "isle" usually is used in reference to an geographical
island...a land mass surrounded by water.

Where in hell did he say he used house paint, dip****?
Also, I take it you've never heard of the tip method.- Hide quoted text -

- Show quoted text -

But I did use housepaint, It's a plywood work boat, it just needs to
breathe...- Hide quoted text -

- Show quoted text -

That may well be, but the fact is, Harry was making, as usual an
ASSumption based on.....nothing.

House paint is pretty much all they sell in the goof aisle of Home
Depot. It was a pretty safe assumption.- Hide quoted text -

- Show quoted text -

Not at my Home Depot. There's all types of paint there.

Artists watercolors? Automotive lacquer? Anti-fouling Bottom paint?
Model airplane enamels? In the goof aisle? Really?

Here's a clue, dopetard - The name of the place is H-O-M-E Depot.
Pretty damned clever of them, eh?- Hide quoted text -

- Show quoted text -

Where did I say exactly what other paints were available there, idiot?
Are you really saying that each and every item Home Depot sells must
be for a home? I wonder where in my house I'll use the receiver hitch
I bought there, as well as the marine carpet moron......

I said that chances are close to, or at, 100% that all paint in the
"goofs aisle" at Home Depot is housepaint. Do you dispute that?

If you do, then you are a bigger idiot than I, or anyone else,
imagined.

Painting a boat..
 

On Sep 5, 1:13*pm, wrote:
On Fri, 5 Sep 2008 10:06:14 -0700 (PDT), wrote:
On Sep 5, 12:05*pm, wrote:
On Fri, 5 Sep 2008 06:46:34 -0700 (PDT), wrote:
On Sep 5, 9:09*am, wrote:
On Fri, 5 Sep 2008 05:42:22 -0700 (PDT), wrote:
On Sep 4, 3:15*pm, wrote:
On Sep 4, 1:29*pm, wrote:

On Sep 4, 11:34*am, hk wrote:

wrote:
Well, we got the sanding done and painted the inside of the Brockway
yesterday. Battleship grey was in the Goof isle at Home Depot,
perfect, flat, nice. It was pretty hot so I had to move quickly, but I
was using a power roller with a pad attachment too. Great for doing
the inside, does a much better job than the sprayers I have used in
the past. Rollers with a "tip" method brush is still the best way to
go for wood boats.

Time today to flip her over and do the bottom, that will be much
easier.

Later, Scotty

You used flat house paint on a boat? *:)

When I was painting wood boats, and I did a whole lot of that, since it
was the job for the relatively unskilled at the boat yard (this was
before the days of high tech paint), we used nice brushes to put on
paint, not rollers, so we could work in the paint. We even brushed on
bottom paint on the smaller boats.

But, if you're using flat house paint, it'll flake off soon enough...so
I guess it doesn't make a difference.

At least you got the aisle right, eh?

BTW, the word "isle" usually is used in reference to an geographical
island...a land mass surrounded by water.

Where in hell did he say he used house paint, dip****?
Also, I take it you've never heard of the tip method.- Hide quoted text -

- Show quoted text -

But I did use housepaint, It's a plywood work boat, it just needs to
breathe...- Hide quoted text -

- Show quoted text -

That may well be, but the fact is, Harry was making, as usual an
ASSumption based on.....nothing.

House paint is pretty much all they sell in the goof aisle of Home
Depot. It was a pretty safe assumption.- Hide quoted text -

- Show quoted text -

Not at my Home Depot. There's all types of paint there.

Artists watercolors? Automotive lacquer? Anti-fouling Bottom paint?
Model airplane enamels? In the goof aisle? Really?

Here's a clue, dopetard - The name of the place is H-O-M-E Depot.
Pretty damned clever of them, eh?- Hide quoted text -

- Show quoted text -

Where did I say exactly what other paints were available there, idiot?
Are you really saying that each and every item Home Depot sells must
be for a home? I wonder where in my house I'll use the receiver hitch
I bought there, as well as the marine carpet moron......

I said that chances are close to, or at, 100% that all paint in the
"goofs aisle" at Home Depot is housepaint. Do you dispute that?

If you do, then you are a bigger idiot than I, or anyone else,
imagined.- Hide quoted text -

- Show quoted text -

Yes, I DO dispute it! As a matter of fact, this afternoon I need to go
to Home Depot, and I'll go to the oops paint aisle (they don't call it
goofs!) and I'll take a picture of paints that are not housepaint,
okay?

Painting a boat..
 

On Fri, 5 Sep 2008 10:25:51 -0700 (PDT), wrote:

On Sep 5, 1:13*pm, wrote:
On Fri, 5 Sep 2008 10:06:14 -0700 (PDT), wrote:
On Sep 5, 12:05*pm, wrote:
On Fri, 5 Sep 2008 06:46:34 -0700 (PDT), wrote:
On Sep 5, 9:09*am, wrote:
On Fri, 5 Sep 2008 05:42:22 -0700 (PDT), wrote:
On Sep 4, 3:15*pm, wrote:
On Sep 4, 1:29*pm, wrote:

On Sep 4, 11:34*am, hk wrote:

wrote:
Well, we got the sanding done and painted the inside of the Brockway
yesterday. Battleship grey was in the Goof isle at Home Depot,
perfect, flat, nice. It was pretty hot so I had to move quickly, but I
was using a power roller with a pad attachment too. Great for doing
the inside, does a much better job than the sprayers I have used in
the past. Rollers with a "tip" method brush is still the best way to
go for wood boats.

Time today to flip her over and do the bottom, that will be much
easier.

Later, Scotty

You used flat house paint on a boat? *:)

When I was painting wood boats, and I did a whole lot of that, since it
was the job for the relatively unskilled at the boat yard (this was
before the days of high tech paint), we used nice brushes to put on
paint, not rollers, so we could work in the paint. We even brushed on
bottom paint on the smaller boats.

But, if you're using flat house paint, it'll flake off soon enough...so
I guess it doesn't make a difference.

At least you got the aisle right, eh?

BTW, the word "isle" usually is used in reference to an geographical
island...a land mass surrounded by water.

Where in hell did he say he used house paint, dip****?
Also, I take it you've never heard of the tip method.- Hide quoted text -

- Show quoted text -

But I did use housepaint, It's a plywood work boat, it just needs to
breathe...- Hide quoted text -

- Show quoted text -

That may well be, but the fact is, Harry was making, as usual an
ASSumption based on.....nothing.

House paint is pretty much all they sell in the goof aisle of Home
Depot. It was a pretty safe assumption.- Hide quoted text -

- Show quoted text -

Not at my Home Depot. There's all types of paint there.

Artists watercolors? Automotive lacquer? Anti-fouling Bottom paint?
Model airplane enamels? In the goof aisle? Really?

Here's a clue, dopetard - The name of the place is H-O-M-E Depot.
Pretty damned clever of them, eh?- Hide quoted text -

- Show quoted text -

Where did I say exactly what other paints were available there, idiot?
Are you really saying that each and every item Home Depot sells must
be for a home? I wonder where in my house I'll use the receiver hitch
I bought there, as well as the marine carpet moron......

I said that chances are close to, or at, 100% that all paint in the
"goofs aisle" at Home Depot is housepaint. Do you dispute that?

If you do, then you are a bigger idiot than I, or anyone else,
imagined.- Hide quoted text -

- Show quoted text -

Yes, I DO dispute it! As a matter of fact, this afternoon I need to go
to Home Depot, and I'll go to the oops paint aisle (they don't call it
goofs!) and I'll take a picture of paints that are not housepaint,
okay?

Bring me back a coffee, too. Milk, no sugar. Thanks.

Painting a boat..
 

On Sep 5, 1:25*pm, wrote:
On Sep 5, 1:13*pm, wrote:





On Fri, 5 Sep 2008 10:06:14 -0700 (PDT), wrote:
On Sep 5, 12:05*pm, wrote:
On Fri, 5 Sep 2008 06:46:34 -0700 (PDT), wrote:
On Sep 5, 9:09*am, wrote:
On Fri, 5 Sep 2008 05:42:22 -0700 (PDT), wrote:
On Sep 4, 3:15*pm, wrote:
On Sep 4, 1:29*pm, wrote:

On Sep 4, 11:34*am, hk wrote:

wrote:
Well, we got the sanding done and painted the inside of the Brockway
yesterday. Battleship grey was in the Goof isle at Home Depot,
perfect, flat, nice. It was pretty hot so I had to move quickly, but I
was using a power roller with a pad attachment too. Great for doing
the inside, does a much better job than the sprayers I have used in
the past. Rollers with a "tip" method brush is still the best way to
go for wood boats.

Time today to flip her over and do the bottom, that will be much
easier.

Later, Scotty

You used flat house paint on a boat? *:)

When I was painting wood boats, and I did a whole lot of that, since it
was the job for the relatively unskilled at the boat yard (this was
before the days of high tech paint), we used nice brushes to put on
paint, not rollers, so we could work in the paint. We even brushed on
bottom paint on the smaller boats.

But, if you're using flat house paint, it'll flake off soon enough...so
I guess it doesn't make a difference.

At least you got the aisle right, eh?

BTW, the word "isle" usually is used in reference to an geographical
island...a land mass surrounded by water.

Where in hell did he say he used house paint, dip****?
Also, I take it you've never heard of the tip method.- Hide quoted text -

- Show quoted text -

But I did use housepaint, It's a plywood work boat, it just needs to
breathe...- Hide quoted text -

- Show quoted text -

That may well be, but the fact is, Harry was making, as usual an
ASSumption based on.....nothing.

House paint is pretty much all they sell in the goof aisle of Home
Depot. It was a pretty safe assumption.- Hide quoted text -

- Show quoted text -

Not at my Home Depot. There's all types of paint there.

Artists watercolors? Automotive lacquer? Anti-fouling Bottom paint?
Model airplane enamels? In the goof aisle? Really?

Here's a clue, dopetard - The name of the place is H-O-M-E Depot.
Pretty damned clever of them, eh?- Hide quoted text -

- Show quoted text -

Where did I say exactly what other paints were available there, idiot?
Are you really saying that each and every item Home Depot sells must
be for a home? I wonder where in my house I'll use the receiver hitch
I bought there, as well as the marine carpet moron......

I said that chances are close to, or at, 100% that all paint in the
"goofs aisle" at Home Depot is housepaint. Do you dispute that?

If you do, then you are a bigger idiot than I, or anyone else,
imagined.- Hide quoted text -

- Show quoted text -

Yes, I DO dispute it! As a matter of fact, this afternoon I need to go
to Home Depot, and I'll go to the oops paint aisle (they don't call it
goofs!) and I'll take a picture of paints that are not housepaint,
okay?- Hide quoted text -

- Show quoted text -

Let me be clear. Persoal and plain exterior plywood boats get
housepaint. Flat inside and gloss outside.. Many of those boats are
still around after nearly 20 years of use... I give customers,
especially those who pay for specialty plywoods the option of a few
different marine paints, I prefer to use Petit Poly based products...
Sometimes epoxy based for bottompaint, depending on intended use.

The 400 dollar Brockway I am painting, is getting house paint. Just
like Payson, and so many others have used for generations....

Painting a boat..
 

On Sep 5, 1:36*pm, wrote:
On Sep 5, 1:25*pm, wrote:





On Sep 5, 1:13*pm, wrote:

On Fri, 5 Sep 2008 10:06:14 -0700 (PDT), wrote:
On Sep 5, 12:05*pm, wrote:
On Fri, 5 Sep 2008 06:46:34 -0700 (PDT), wrote:
On Sep 5, 9:09*am, wrote:
On Fri, 5 Sep 2008 05:42:22 -0700 (PDT), wrote:
On Sep 4, 3:15*pm, wrote:
On Sep 4, 1:29*pm, wrote:

On Sep 4, 11:34*am, hk wrote:

wrote:
Well, we got the sanding done and painted the inside of the Brockway
yesterday. Battleship grey was in the Goof isle at Home Depot,
perfect, flat, nice. It was pretty hot so I had to move quickly, but I
was using a power roller with a pad attachment too. Great for doing
the inside, does a much better job than the sprayers I have used in
the past. Rollers with a "tip" method brush is still the best way to
go for wood boats.

Time today to flip her over and do the bottom, that will be much
easier.

Later, Scotty

You used flat house paint on a boat? *:)

When I was painting wood boats, and I did a whole lot of that, since it
was the job for the relatively unskilled at the boat yard (this was
before the days of high tech paint), we used nice brushes to put on
paint, not rollers, so we could work in the paint. We even brushed on
bottom paint on the smaller boats.

But, if you're using flat house paint, it'll flake off soon enough...so
I guess it doesn't make a difference.

At least you got the aisle right, eh?

BTW, the word "isle" usually is used in reference to an geographical
island...a land mass surrounded by water.

Where in hell did he say he used house paint, dip****?
Also, I take it you've never heard of the tip method.- Hide quoted text -

- Show quoted text -

But I did use housepaint, It's a plywood work boat, it just needs to
breathe...- Hide quoted text -

- Show quoted text -

That may well be, but the fact is, Harry was making, as usual an
ASSumption based on.....nothing.

House paint is pretty much all they sell in the goof aisle of Home
Depot. It was a pretty safe assumption.- Hide quoted text -

- Show quoted text -

Not at my Home Depot. There's all types of paint there.

Artists watercolors? Automotive lacquer? Anti-fouling Bottom paint?
Model airplane enamels? In the goof aisle? Really?

Here's a clue, dopetard - The name of the place is H-O-M-E Depot.
Pretty damned clever of them, eh?- Hide quoted text -

- Show quoted text -

Where did I say exactly what other paints were available there, idiot?
Are you really saying that each and every item Home Depot sells must
be for a home? I wonder where in my house I'll use the receiver hitch
I bought there, as well as the marine carpet moron......

I said that chances are close to, or at, 100% that all paint in the
"goofs aisle" at Home Depot is housepaint. Do you dispute that?

If you do, then you are a bigger idiot than I, or anyone else,
imagined.- Hide quoted text -

- Show quoted text -

Yes, I DO dispute it! As a matter of fact, this afternoon I need to go
to Home Depot, and I'll go to the oops paint aisle (they don't call it
goofs!) and I'll take a picture of paints that are not housepaint,
okay?- Hide quoted text -

- Show quoted text -

Let me be clear. Persoal and plain exterior plywood boats get
housepaint. Flat inside and gloss outside.. Many of those boats are
still around after nearly 20 years of use... I give customers,
especially those who pay for specialty plywoods the option of a few
different marine paints, I prefer to use Petit Poly based products...
Sometimes epoxy based for bottompaint, depending on intended use.

The 400 dollar Brockway I am painting, is getting house paint. Just
like Payson, and so many others have used for generations....- Hide quoted text -

- Show quoted text -

Of course, why wouldn't you want to use a paint that withstands the
elements?!

Painting a boat..
 

On Sep 5, 1:33*pm, wrote:
On Fri, 5 Sep 2008 10:25:51 -0700 (PDT), wrote:
On Sep 5, 1:13*pm, wrote:
On Fri, 5 Sep 2008 10:06:14 -0700 (PDT), wrote:
On Sep 5, 12:05*pm, wrote:
On Fri, 5 Sep 2008 06:46:34 -0700 (PDT), wrote:
On Sep 5, 9:09*am, wrote:
On Fri, 5 Sep 2008 05:42:22 -0700 (PDT), wrote:
On Sep 4, 3:15*pm, wrote:
On Sep 4, 1:29*pm, wrote:

On Sep 4, 11:34*am, hk wrote:

wrote:
Well, we got the sanding done and painted the inside of the Brockway
yesterday. Battleship grey was in the Goof isle at Home Depot,
perfect, flat, nice. It was pretty hot so I had to move quickly, but I
was using a power roller with a pad attachment too. Great for doing
the inside, does a much better job than the sprayers I have used in
the past. Rollers with a "tip" method brush is still the best way to
go for wood boats.

Time today to flip her over and do the bottom, that will be much
easier.

Later, Scotty

You used flat house paint on a boat? *:)

When I was painting wood boats, and I did a whole lot of that, since it
was the job for the relatively unskilled at the boat yard (this was
before the days of high tech paint), we used nice brushes to put on
paint, not rollers, so we could work in the paint. We even brushed on
bottom paint on the smaller boats.

But, if you're using flat house paint, it'll flake off soon enough...so
I guess it doesn't make a difference.

At least you got the aisle right, eh?

BTW, the word "isle" usually is used in reference to an geographical
island...a land mass surrounded by water.

Where in hell did he say he used house paint, dip****?
Also, I take it you've never heard of the tip method.- Hide quoted text -

- Show quoted text -

But I did use housepaint, It's a plywood work boat, it just needs to
breathe...- Hide quoted text -

- Show quoted text -

That may well be, but the fact is, Harry was making, as usual an
ASSumption based on.....nothing.

House paint is pretty much all they sell in the goof aisle of Home
Depot. It was a pretty safe assumption.- Hide quoted text -

- Show quoted text -

Not at my Home Depot. There's all types of paint there.

Artists watercolors? Automotive lacquer? Anti-fouling Bottom paint?
Model airplane enamels? In the goof aisle? Really?

Here's a clue, dopetard - The name of the place is H-O-M-E Depot.
Pretty damned clever of them, eh?- Hide quoted text -

- Show quoted text -

Where did I say exactly what other paints were available there, idiot?
Are you really saying that each and every item Home Depot sells must
be for a home? I wonder where in my house I'll use the receiver hitch
I bought there, as well as the marine carpet moron......

I said that chances are close to, or at, 100% that all paint in the
"goofs aisle" at Home Depot is housepaint. Do you dispute that?

If you do, then you are a bigger idiot than I, or anyone else,
imagined.- Hide quoted text -

- Show quoted text -

Yes, I DO dispute it! As a matter of fact, this afternoon I need to go
to Home Depot, and I'll go to the oops paint aisle (they don't call it
goofs!) and I'll take a picture of paints that are not housepaint,
okay?

Bring me back a coffee, too. Milk, no sugar. Thanks.- Hide quoted text -

- Show quoted text -

Yeah, I know, you've realized what a blow hard you are. Almost as good
as your new lover Harry.

Painting a boat..
 

On Fri, 5 Sep 2008 10:58:18 -0700 (PDT), wrote:

On Sep 5, 1:33*pm, wrote:
On Fri, 5 Sep 2008 10:25:51 -0700 (PDT), wrote:
On Sep 5, 1:13*pm, wrote:
On Fri, 5 Sep 2008 10:06:14 -0700 (PDT), wrote:
On Sep 5, 12:05*pm, wrote:
On Fri, 5 Sep 2008 06:46:34 -0700 (PDT), wrote:
On Sep 5, 9:09*am, wrote:
On Fri, 5 Sep 2008 05:42:22 -0700 (PDT), wrote:
On Sep 4, 3:15*pm, wrote:
On Sep 4, 1:29*pm, wrote:

On Sep 4, 11:34*am, hk wrote:

wrote:
Well, we got the sanding done and painted the inside of the Brockway
yesterday. Battleship grey was in the Goof isle at Home Depot,
perfect, flat, nice. It was pretty hot so I had to move quickly, but I
was using a power roller with a pad attachment too. Great for doing
the inside, does a much better job than the sprayers I have used in
the past. Rollers with a "tip" method brush is still the best way to
go for wood boats.

Time today to flip her over and do the bottom, that will be much
easier.

Later, Scotty

You used flat house paint on a boat? *:)

When I was painting wood boats, and I did a whole lot of that, since it
was the job for the relatively unskilled at the boat yard (this was
before the days of high tech paint), we used nice brushes to put on
paint, not rollers, so we could work in the paint. We even brushed on
bottom paint on the smaller boats.

But, if you're using flat house paint, it'll flake off soon enough...so
I guess it doesn't make a difference.

At least you got the aisle right, eh?

BTW, the word "isle" usually is used in reference to an geographical
island...a land mass surrounded by water.

Where in hell did he say he used house paint, dip****?
Also, I take it you've never heard of the tip method.- Hide quoted text -

- Show quoted text -

But I did use housepaint, It's a plywood work boat, it just needs to
breathe...- Hide quoted text -

- Show quoted text -

That may well be, but the fact is, Harry was making, as usual an
ASSumption based on.....nothing.

House paint is pretty much all they sell in the goof aisle of Home
Depot. It was a pretty safe assumption.- Hide quoted text -

- Show quoted text -

Not at my Home Depot. There's all types of paint there.

Artists watercolors? Automotive lacquer? Anti-fouling Bottom paint?
Model airplane enamels? In the goof aisle? Really?

Here's a clue, dopetard - The name of the place is H-O-M-E Depot.
Pretty damned clever of them, eh?- Hide quoted text -

- Show quoted text -

Where did I say exactly what other paints were available there, idiot?
Are you really saying that each and every item Home Depot sells must
be for a home? I wonder where in my house I'll use the receiver hitch
I bought there, as well as the marine carpet moron......

I said that chances are close to, or at, 100% that all paint in the
"goofs aisle" at Home Depot is housepaint. Do you dispute that?

If you do, then you are a bigger idiot than I, or anyone else,
imagined.- Hide quoted text -

- Show quoted text -

Yes, I DO dispute it! As a matter of fact, this afternoon I need to go
to Home Depot, and I'll go to the oops paint aisle (they don't call it
goofs!) and I'll take a picture of paints that are not housepaint,
okay?

Bring me back a coffee, too. Milk, no sugar. Thanks.- Hide quoted text -

- Show quoted text -

Yeah, I know, you've realized what a blow hard you are. Almost as good
as your new lover Harry.

Harry's obviously not my new lover, so you can stop the jilted
girlfriend act.

Painting a boat..
 

On Sep 5, 1:58*pm, wrote:
On Sep 5, 1:33*pm, wrote:





On Fri, 5 Sep 2008 10:25:51 -0700 (PDT), wrote:
On Sep 5, 1:13*pm, wrote:
On Fri, 5 Sep 2008 10:06:14 -0700 (PDT), wrote:
On Sep 5, 12:05*pm, wrote:
On Fri, 5 Sep 2008 06:46:34 -0700 (PDT), wrote:
On Sep 5, 9:09*am, wrote:
On Fri, 5 Sep 2008 05:42:22 -0700 (PDT), wrote:
On Sep 4, 3:15*pm, wrote:
On Sep 4, 1:29*pm, wrote:

On Sep 4, 11:34*am, hk wrote:

wrote:
Well, we got the sanding done and painted the inside of the Brockway
yesterday. Battleship grey was in the Goof isle at Home Depot,
perfect, flat, nice. It was pretty hot so I had to move quickly, but I
was using a power roller with a pad attachment too. Great for doing
the inside, does a much better job than the sprayers I have used in
the past. Rollers with a "tip" method brush is still the best way to
go for wood boats.

Time today to flip her over and do the bottom, that will be much
easier.

Later, Scotty

You used flat house paint on a boat? *:)

When I was painting wood boats, and I did a whole lot of that, since it
was the job for the relatively unskilled at the boat yard (this was
before the days of high tech paint), we used nice brushes to put on
paint, not rollers, so we could work in the paint. We even brushed on
bottom paint on the smaller boats.

But, if you're using flat house paint, it'll flake off soon enough...so
I guess it doesn't make a difference.

At least you got the aisle right, eh?

BTW, the word "isle" usually is used in reference to an geographical
island...a land mass surrounded by water.

Where in hell did he say he used house paint, dip****?
Also, I take it you've never heard of the tip method.- Hide quoted text -

- Show quoted text -

But I did use housepaint, It's a plywood work boat, it just needs to
breathe...- Hide quoted text -

- Show quoted text -

That may well be, but the fact is, Harry was making, as usual an
ASSumption based on.....nothing.

House paint is pretty much all they sell in the goof aisle of Home
Depot. It was a pretty safe assumption.- Hide quoted text -

- Show quoted text -

Not at my Home Depot. There's all types of paint there.

Artists watercolors? Automotive lacquer? Anti-fouling Bottom paint?
Model airplane enamels? In the goof aisle? Really?

Here's a clue, dopetard - The name of the place is H-O-M-E Depot.
Pretty damned clever of them, eh?- Hide quoted text -

- Show quoted text -

Where did I say exactly what other paints were available there, idiot?
Are you really saying that each and every item Home Depot sells must
be for a home? I wonder where in my house I'll use the receiver hitch
I bought there, as well as the marine carpet moron......

I said that chances are close to, or at, 100% that all paint in the
"goofs aisle" at Home Depot is housepaint. Do you dispute that?

If you do, then you are a bigger idiot than I, or anyone else,
imagined.- Hide quoted text -

- Show quoted text -

Yes, I DO dispute it! As a matter of fact, this afternoon I need to go
to Home Depot, and I'll go to the oops paint aisle (they don't call it
goofs!) and I'll take a picture of paints that are not housepaint,
okay?

Bring me back a coffee, too. Milk, no sugar. Thanks.- Hide quoted text -

- Show quoted text -

Yeah, I know, you've realized what a blow hard you are. Almost as good
as your new lover Harry.- Hide quoted text -

- Show quoted text -

I probably should also mention that my boats are not generally
configured to live in the water. They should be pulled and stored on
the dry between uses.... All of my customers know that when they buy
them. I have sent many a prospective customer down the street when
they really needed a different tool...