Watching boats in chop
 

On Mon, 18 Aug 2008 17:47:06 -0400, hk wrote:

Formica is just a plasticized coating over paper. It's certainly ok for
a kitchen, but on a boat, I'd want something not paper-backed.

I have been sawing, drilling, sanding, grinding Formica for more than
fifty years and I have never seen a hint of any paper. You must have
another product in mind.

Casady

Watching boats in chop
 

Richard Casady wrote:
On Mon, 18 Aug 2008 17:02:11 -0400, hk wrote:

JimH wrote:
On Aug 18, 12:30 am, Wayne.B wrote:
On Sun, 17 Aug 2008 19:30:21 -0400, hk wrote:
Parker's solid fir plywood stringer system continues to give
customers the strongest, toughest and safest fiberglass boats built.
~~ snerk~~
Plywood stringers indeed. At least they're not chip board.
Parker and Grady use the same XL ply stringer material, as do many other
manufacturers of top-quality boats. What are the stringers made of in
your floating RV?
Probably solid teak, everything else is.

There was a 60 some foot GB docked alongside the Yacht Club on the
River this weekend. Looked like a planked teak transom on a
fiberglass hull.

Nice looking boat.

Which goes to show how subjective taste is. I've never liked teak on a
boat. On the exterior, I always preferred mahogany, the real stuff, not
the crap that is sold most often these days as mahogany. In a cabin, I
pretty cherry or oak.

All the cruise ships seem to have three inch thick unfinished teak
weather decks. Where you go to run laps. They sand it once a year, and
hose it down occasionally. US battleships had four inch teak decks.
Also unfinished.

Casady


I'll keep that in mind when I go shopping for a cruise ship or battleship.


--
I am only one, but I am one. I cannot do everything, but I can do
something. And because I cannot do everything, I will not refuse to do
the something that I can do. What I can do, I should do. And what I
should do, by the grace of God, I will do.

— Edward Everett Hale (1822-1909)

Watching boats in chop
 

Richard Casady wrote:
On Mon, 18 Aug 2008 17:47:06 -0400, hk wrote:

Formica is just a plasticized coating over paper. It's certainly ok for
a kitchen, but on a boat, I'd want something not paper-backed.

I have been sawing, drilling, sanding, grinding Formica for more than
fifty years and I have never seen a hint of any paper. You must have
another product in mind.

Casady


The underside of Formica is made up of kraft paper infused with resin.

According to the Formica web site, the product is composed of
"melamine-impregnated decorative surface paper combined with
phenolic-treated kraft paper and consolidated
in a press at high pressures."

I have Formica in mind.



--
I am only one, but I am one. I cannot do everything, but I can do
something. And because I cannot do everything, I will not refuse to do
the something that I can do. What I can do, I should do. And what I
should do, by the grace of God, I will do.

— Edward Everett Hale (1822-1909)

Watching boats in chop
 

On Mon, 18 Aug 2008 22:41:09 GMT, (Richard
Casady) wrote:

On Mon, 18 Aug 2008 17:47:06 -0400, hk wrote:

Formica is just a plasticized coating over paper. It's certainly ok for
a kitchen, but on a boat, I'd want something not paper-backed.

I have been sawing, drilling, sanding, grinding Formica for more than
fifty years and I have never seen a hint of any paper. You must have
another product in mind.

Heck, I thought you googled it, but I guess not. I just did and found
plenty of references to paper, but "resin impregnated paper."
Don't think it matters, but I'm not a materials expert.
I did find that Nordhavn offers formica cladding on the interior
though. Link is too long, but you can google
"RETAIL SPECIFICATIONS - NORDHAVN 57 HULL "

wherein"

"note: If preferred, at time of order, bulkheads, cabinetry and
countertops can be specified in Formica"

--Vic

Watching boats in chop
 

Vic Smith wrote:
On Mon, 18 Aug 2008 22:41:09 GMT, (Richard
Casady) wrote:

On Mon, 18 Aug 2008 17:47:06 -0400, hk wrote:

Formica is just a plasticized coating over paper. It's certainly ok for
a kitchen, but on a boat, I'd want something not paper-backed.
I have been sawing, drilling, sanding, grinding Formica for more than
fifty years and I have never seen a hint of any paper. You must have
another product in mind.

Heck, I thought you googled it, but I guess not. I just did and found
plenty of references to paper, but "resin impregnated paper."
Don't think it matters, but I'm not a materials expert.
I did find that Nordhavn offers formica cladding on the interior
though. Link is too long, but you can google
"RETAIL SPECIFICATIONS - NORDHAVN 57 HULL "

wherein"

"note: If preferred, at time of order, bulkheads, cabinetry and
countertops can be specified in Formica"

--Vic


I don't know what Nordhavn uses, but there are several grades and
thicknesses of Formica, including one that is more "plasticy" than "papery."




--
I am only one, but I am one. I cannot do everything, but I can do
something. And because I cannot do everything, I will not refuse to do
the something that I can do. What I can do, I should do. And what I
should do, by the grace of God, I will do.

— Edward Everett Hale (1822-1909)

Watching boats in chop
 

"Wayne.B" wrote in message
...
On Mon, 18 Aug 2008 13:52:05 -0700 (PDT), JimH
wrote:

There was a 60 some foot GB docked alongside the Yacht Club on the
River this weekend. Looked like a planked teak transom on a
fiberglass hull.

What river is that? We live just off the Caloosahatchie in SWFL.

The teak (over fiberglass) transom is one of Grand Bank's most
recogniziable features. They look great when properly finished but
it's a lot of work to keep it up. Mine is about ready for another
re-do but we're in the middle of the rainy season here and ducking
hurricanes.


http://www.eisboch.com/transomname.jpg

Eisboch

Watching boats in chop
 

"hk" wrote in message
. ..
Eisboch wrote:
On Mon, 18 Aug 2008 17:02:11 -0400, hk wrote:

Which goes to show how subjective taste is. I've never liked teak on a
boat. On the exterior, I always preferred mahogany, the real stuff, not
the crap that is sold most often these days as mahogany. In a cabin, I
pretty cherry or oak.


I guess the boys over at American Marine Ltd. never got your memo.


Eisboch





If someone gave me one of their barges, I would sell it in a New York
minute.


Really? Not me. ....

http://www.grandbanks.com/images/yac...leryMain03.jpg

http://www.grandbanks.com/images/yac...kplanStdMd.jpg

http://www.grandbanks.com/images/yac...leryMain05.jpg

Eisboch

Watching boats in chop
 

"Richard Casady" wrote in message
...
On Mon, 18 Aug 2008 17:02:11 -0400, hk wrote:


All the cruise ships seem to have three inch thick unfinished teak
weather decks. Where you go to run laps. They sand it once a year, and
hose it down occasionally. US battleships had four inch teak decks.
Also unfinished.

Casady


Harry doesn't do cruise ships or battleships.

He prefers mahogany, you see.

Eisboch

Watching boats in chop
 

"Eisboch" wrote in message
...

"hk" wrote in message
. ..
Eisboch wrote:
On Mon, 18 Aug 2008 17:02:11 -0400, hk wrote:

Which goes to show how subjective taste is. I've never liked teak on a
boat. On the exterior, I always preferred mahogany, the real stuff,
not
the crap that is sold most often these days as mahogany. In a cabin, I
pretty cherry or oak.


I guess the boys over at American Marine Ltd. never got your memo.


Eisboch





If someone gave me one of their barges, I would sell it in a New York
minute.


Really? Not me. ....

http://www.grandbanks.com/images/yac...leryMain03.jpg

http://www.grandbanks.com/images/yac...kplanStdMd.jpg

http://www.grandbanks.com/images/yac...leryMain05.jpg

Eisboch


Ahhh....floating RVs. 8)

Watching boats in chop
 

On Mon, 18 Aug 2008 17:46:03 -0400, hk wrote:

If someone gave me one of their barges, I would sell it in a New York
minute.

You would not.