Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old June 9th 08, 08:51 PM posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Jun 2008
Posts: 2
Default Raymarine C70 Display Problem

I have an almost 2 year old Raymarine C70 Multifunction Display that
has worked great up until yesterday. I powered on the unit and the
display showed vertical black and white lines. I cycled it a number
of times with the same result. Has anyone experienced a problem
similar to mine with there C70 MFD?

  #2   Report Post  
Old June 9th 08, 08:58 PM posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Mar 2007
Posts: 388
Default Raymarine C70 Display Problem

Post to S.E.R. Does it do this with the chart card out, or in? or both?
Disconnect all inputs except the power plug, and retry. There should
also be a reboot key sequence, or holding down cetrtain keys on power
up. Check the manual foe these.
JR


wrote:

I have an almost 2 year old Raymarine C70 Multifunction Display that
has worked great up until yesterday. I powered on the unit and the
display showed vertical black and white lines. I cycled it a number
of times with the same result. Has anyone experienced a problem
similar to mine with there C70 MFD?


--
--------------------------------------------------------------
Home Page:
http://www.seanet.com/~jasonrnorth
  #3   Report Post  
Old June 9th 08, 09:38 PM posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Jun 2008
Posts: 2
Default Raymarine C70 Display Problem

On Jun 9, 3:58*pm, JR North wrote:
Post to S.E.R. Does it do this with the chart card out, or in? or both?
Disconnect all inputs except the power plug, and retry. There should
also be a reboot key sequence, or holding down cetrtain keys on power
up. Check the manual foe these.
JR

wrote:
I have an almost 2 year old Raymarine C70 Multifunction Display that
has worked great up until yesterday. I powered on the unit and the
display showed vertical black and white lines. *I cycled it a number
of times with the same result. Has anyone experienced a problem
similar to mine with there C70 MFD?


--
--------------------------------------------------------------
* * * * Home Page:http://www.seanet.com/~jasonrnorth


Thanks JR. I didn't have any of my manuals with me yesterday so I am
gathering any suggestions, Raymarine troubleshooting procedures etc..
I'm going to drop the panel and check all the connections to see if I
have a loose ground or similar type of problem. Thanks for the tips,
I'll be looking at those items this weekend.

Jim
  #4   Report Post  
Old June 9th 08, 09:45 PM posted to rec.boats
HK HK is offline
external usenet poster
 
First recorded activity by BoatBanter: May 2007
Posts: 13,348
Default Raymarine C70 Display Problem

wrote:
On Jun 9, 3:58 pm, JR North wrote:
Post to S.E.R. Does it do this with the chart card out, or in? or both?
Disconnect all inputs except the power plug, and retry. There should
also be a reboot key sequence, or holding down cetrtain keys on power
up. Check the manual foe these.
JR

wrote:
I have an almost 2 year old Raymarine C70 Multifunction Display that
has worked great up until yesterday. I powered on the unit and the
display showed vertical black and white lines. I cycled it a number
of times with the same result. Has anyone experienced a problem
similar to mine with there C70 MFD?

--
--------------------------------------------------------------
Home Page:
http://www.seanet.com/~jasonrnorth

Thanks JR. I didn't have any of my manuals with me yesterday so I am
gathering any suggestions, Raymarine troubleshooting procedures etc..
I'm going to drop the panel and check all the connections to see if I
have a loose ground or similar type of problem. Thanks for the tips,
I'll be looking at those items this weekend.

Jim



Give Raymarine a call. Good tech support, and their techs are in the
United States and speak English.
  #5   Report Post  
Old June 9th 08, 10:02 PM posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Sep 2007
Posts: 1,135
Default Raymarine C70 Display Problem

On Jun 9, 4:45 pm, HK wrote:
wrote:
On Jun 9, 3:58 pm, JR North wrote:
Post to S.E.R. Does it do this with the chart card out, or in? or both?
Disconnect all inputs except the power plug, and retry. There should
also be a reboot key sequence, or holding down cetrtain keys on power
up. Check the manual foe these.
JR


wrote:
I have an almost 2 year old Raymarine C70 Multifunction Display that
has worked great up until yesterday. I powered on the unit and the
display showed vertical black and white lines. I cycled it a number
of times with the same result. Has anyone experienced a problem
similar to mine with there C70 MFD?
--
--------------------------------------------------------------
Home Page:http://www.seanet.com/~jasonrnorth


Thanks JR. I didn't have any of my manuals with me yesterday so I am
gathering any suggestions, Raymarine troubleshooting procedures etc..
I'm going to drop the panel and check all the connections to see if I
have a loose ground or similar type of problem. Thanks for the tips,
I'll be looking at those items this weekend.


Jim


Give Raymarine a call. Good tech support, and their techs are in the
United States and speak English.


Good advice! I never had a problem with Raymarine tech service.


  #6   Report Post  
Old June 9th 08, 10:40 PM posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Jan 2008
Posts: 189
Default Raymarine C70 Display Problem

On Jun 9, 3:51*pm, wrote:
I have an almost 2 year old Raymarine C70 Multifunction Display that
has worked great up until yesterday. I powered on the unit and the
display showed vertical black and white lines. *I cycled it a number
of times with the same result. Has anyone experienced a problem
similar to mine with there C70 MFD?


Nice try...COWARD. Your Wife know how yellow you are?

Same isp number...Loogy
  #7   Report Post  
Old June 10th 08, 05:37 PM posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Mar 2007
Posts: 388
Default Raymarine C70 Display Problem


That's no guarantee.
JR

HK wrote:



and their techs are in the
United States and speak English.


--
--------------------------------------------------------------
Home Page: http://www.seanet.com/~jasonrnorth
  #8   Report Post  
Old June 10th 08, 05:43 PM posted to rec.boats
HK HK is offline
external usenet poster
 
First recorded activity by BoatBanter: May 2007
Posts: 13,348
Default Raymarine C70 Display Problem

JR North wrote:

That's no guarantee.
JR

HK wrote:



and their techs are in the
United States and speak English.



I've called twice and got a couple of dudes in New England who spoke
English as she is supposed to be spoke.


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Raymarine and third party equipment via NMEA gives problem WillemdeNie Electronics 5 April 12th 08 11:46 AM
Raymarine radar display and radome compatibility jace General 1 January 11th 07 03:11 AM
Raymarine radar display and radome compatibility jace General 0 January 10th 07 06:36 PM
Raymarine SL72 and GPS Problem... Please Help! ny3103 Electronics 0 May 30th 06 03:50 PM
Raymarine autopilot problem just me Electronics 6 November 6th 05 01:39 PM


All times are GMT +1. The time now is 06:31 PM.

Powered by vBulletin® Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright 2004-2017 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017