"HK" wrote in message
...
Mike wrote:
That's a "tamper proof" screw. By circle, do you mean a pin in the
center? If so, get a small nail punch and tap that center pin from one
side to another until it breaks off. Then get the proper sized torx screw
driver and unscrew it.

--Mike

"LoogyPicker" wrote in message
news:zAByj.9251$C1.2520@trnddc07...
I'm trying to remove the slow moving sign from my house and Im having
problems with the screws. They are star shaped and have a little circle
in the middle. Does anyone know what kind of tool I need to remove
these?





snerk

Snerked by that snarky draft dodger, Harry. Can you handle it Mike?

agent X wrote:

"HK" wrote in message
...
Mike wrote:
That's a "tamper proof" screw. By circle, do you mean a pin in the
center? If so, get a small nail punch and tap that center pin from
one side to another until it breaks off. Then get the proper sized
torx screw driver and unscrew it.

--Mike

"LoogyPicker" wrote in message
news:zAByj.9251$C1.2520@trnddc07...
I'm trying to remove the slow moving sign from my house and Im
having problems with the screws. They are star shaped and have a
little circle in the middle. Does anyone know what kind of tool I
need to remove these?





snerk

Snerked by that snarky draft dodger, Harry. Can you handle it Mike?


I know you are pretty much of a dimwit, "Jim," and I am not too familiar
with the lack of thinking ability of that sort of mindlessness, so
please help me out. What makes you think I was a draft dodger? Try to be
specific.

On Mar 2, 5:42*pm, HK wrote:
agent X wrote:

"HK" wrote in message
...
Mike wrote:
That's a "tamper proof" screw. By circle, do you mean a pin in the
center? If so, get a small nail punch and tap that center pin from
one side to another until it breaks off. Then get the proper sized
torx screw driver and unscrew it.

--Mike

"LoogyPicker" wrote in message
news:zAByj.9251$C1.2520@trnddc07...
I'm trying to remove the slow moving sign from my house and Im
having problems with the screws. They are star shaped and have a
little circle in the middle. Does anyone know what kind of tool I
need to remove these?

snerk

Snerked by that snarky draft dodger, Harry. Can you handle it Mike?

I know you are pretty much of a dimwit, "Jim," and I am not too familiar
with the lack of thinking ability of that sort of mindlessness, so
please help me out. What makes you think I was a draft dodger? Try to be
specific.- Hide quoted text -

- Show quoted text -

You refuse to roll down the windows when you fart?

wrote:
On Mar 2, 5:42 pm, HK wrote:
agent X wrote:

"HK" wrote in message
...
Mike wrote:
That's a "tamper proof" screw. By circle, do you mean a pin in the
center? If so, get a small nail punch and tap that center pin from
one side to another until it breaks off. Then get the proper sized
torx screw driver and unscrew it.
--Mike
"LoogyPicker" wrote in message
news:zAByj.9251$C1.2520@trnddc07...
I'm trying to remove the slow moving sign from my house and Im
having problems with the screws. They are star shaped and have a
little circle in the middle. Does anyone know what kind of tool I
need to remove these?
snerk
Snerked by that snarky draft dodger, Harry. Can you handle it Mike?
I know you are pretty much of a dimwit, "Jim," and I am not too familiar
with the lack of thinking ability of that sort of mindlessness, so
please help me out. What makes you think I was a draft dodger? Try to be
specific.- Hide quoted text -

- Show quoted text -

You refuse to roll down the windows when you fart?


I used to, but my wife cured me of that.

Seriously, I wonder where DimWit Jim conjured up that bit of false
information.

On Sun, 02 Mar 2008 18:01:49 -0500, HK wrote:

wrote:
On Mar 2, 5:42 pm, HK wrote:
agent X wrote:

"HK" wrote in message
...
Mike wrote:
That's a "tamper proof" screw. By circle, do you mean a pin in the
center? If so, get a small nail punch and tap that center pin from
one side to another until it breaks off. Then get the proper sized
torx screw driver and unscrew it.
--Mike
"LoogyPicker" wrote in message
news:zAByj.9251$C1.2520@trnddc07...
I'm trying to remove the slow moving sign from my house and Im
having problems with the screws. They are star shaped and have a
little circle in the middle. Does anyone know what kind of tool I
need to remove these?
snerk
Snerked by that snarky draft dodger, Harry. Can you handle it Mike?
I know you are pretty much of a dimwit, "Jim," and I am not too familiar
with the lack of thinking ability of that sort of mindlessness, so
please help me out. What makes you think I was a draft dodger? Try to be
specific.- Hide quoted text -

- Show quoted text -

You refuse to roll down the windows when you fart?


I used to, but my wife cured me of that.

Seriously, I wonder where DimWit Jim conjured up that bit of false
information.

What's Jimh doing now?

And who are you to talk about false information?

Lobsta' boat?
--
John H

"All decisions are the result of binary thinking."

John H. wrote:
On Sun, 02 Mar 2008 18:01:49 -0500, HK wrote:

wrote:
On Mar 2, 5:42 pm, HK wrote:
agent X wrote:

"HK" wrote in message
...
Mike wrote:
That's a "tamper proof" screw. By circle, do you mean a pin in the
center? If so, get a small nail punch and tap that center pin from
one side to another until it breaks off. Then get the proper sized
torx screw driver and unscrew it.
--Mike
"LoogyPicker" wrote in message
news:zAByj.9251$C1.2520@trnddc07...
I'm trying to remove the slow moving sign from my house and Im
having problems with the screws. They are star shaped and have a
little circle in the middle. Does anyone know what kind of tool I
need to remove these?
snerk
Snerked by that snarky draft dodger, Harry. Can you handle it Mike?
I know you are pretty much of a dimwit, "Jim," and I am not too familiar
with the lack of thinking ability of that sort of mindlessness, so
please help me out. What makes you think I was a draft dodger? Try to be
specific.- Hide quoted text -

- Show quoted text -
You refuse to roll down the windows when you fart?

I used to, but my wife cured me of that.

Seriously, I wonder where DimWit Jim conjured up that bit of false
information.

What's Jimh doing now?


Sorry, crapbrain, but the "Jim" under discussion here is the Florida
JimJerk, who apparently is now posting as "X".

"HK" wrote in message
...
agent X wrote:

"HK" wrote in message
...
Mike wrote:
That's a "tamper proof" screw. By circle, do you mean a pin in the
center? If so, get a small nail punch and tap that center pin from one
side to another until it breaks off. Then get the proper sized torx
screw driver and unscrew it.

--Mike

"LoogyPicker" wrote in message
news:zAByj.9251$C1.2520@trnddc07...
I'm trying to remove the slow moving sign from my house and Im having
problems with the screws. They are star shaped and have a little
circle in the middle. Does anyone know what kind of tool I need to
remove these?





snerk

Snerked by that snarky draft dodger, Harry. Can you handle it Mike?


I know you are pretty much of a dimwit, "Jim," and I am not too familiar
with the lack of thinking ability of that sort of mindlessness, so please
help me out. What makes you think I was a draft dodger? Try to be
specific.

Now Harry. Why would I care to help you out after all of the niceties you
have bestowed on me and my fellow veterans. Stew in your own juices, fella.

agent X wrote:

"HK" wrote in message
...
agent X wrote:

"HK" wrote in message
...
Mike wrote:
That's a "tamper proof" screw. By circle, do you mean a pin in the
center? If so, get a small nail punch and tap that center pin from
one side to another until it breaks off. Then get the proper sized
torx screw driver and unscrew it.

--Mike

"LoogyPicker" wrote in message
news:zAByj.9251$C1.2520@trnddc07...
I'm trying to remove the slow moving sign from my house and Im
having problems with the screws. They are star shaped and have a
little circle in the middle. Does anyone know what kind of tool I
need to remove these?





snerk

Snerked by that snarky draft dodger, Harry. Can you handle it Mike?


I know you are pretty much of a dimwit, "Jim," and I am not too
familiar with the lack of thinking ability of that sort of
mindlessness, so please help me out. What makes you think I was a
draft dodger? Try to be specific.

Now Harry. Why would I care to help you out after all of the niceties
you have bestowed on me and my fellow veterans. Stew in your own juices,
fella.


Just as I suspected...nothing.

Snerked by that snarky draft dodger, Harry. Can you handle it Mike?

I wasn't aware that I had been snerked by Harry, until you told me. I feel
so dirty now... lol

--Mike

"agent X" wrote in message
...

"HK" wrote in message
...
Mike wrote:
That's a "tamper proof" screw. By circle, do you mean a pin in the
center? If so, get a small nail punch and tap that center pin from one
side to another until it breaks off. Then get the proper sized torx
screw driver and unscrew it.

--Mike

"LoogyPicker" wrote in message
news:zAByj.9251$C1.2520@trnddc07...
I'm trying to remove the slow moving sign from my house and Im having
problems with the screws. They are star shaped and have a little circle
in the middle. Does anyone know what kind of tool I need to remove
these?





snerk

Snerked by that snarky draft dodger, Harry. Can you handle it Mike?

On Sun, 2 Mar 2008 15:54:39 -0800, "Mike" wrote:

I wasn't aware that I had been snerked by Harry, until you told me. I feel
so dirty now... lol

All you clowns using the term ~~ snerk ~~ copyrighted by me under the
umbrella of Hairy Krauts Productions, a whole owned subsidiary of
Short Wave Sportfishing are going to have start paying me $1,000 per
use.

I'll be running a tab. :)