Home |
Search |
Today's Posts |
|
#1
![]()
posted to rec.boats
|
|||
|
|||
![]()
I came across a 1988 Evinrude 70 hp that wont stay running. I know its
a fuel problem because you can sputter out and turn around and go, by pushing the choke in and out and when you get down on it it will run fine by holding the choke in. The problem is that I dont want to replace anything I dont have to so if anyone has any suggestions I would appriciate it. The motor had a VRO but someone bypassed it and put a regular fuel pump on it. Thanks |
#2
![]()
posted to rec.boats
|
|||
|
|||
![]() "Thunder" wrote in message ... I came across a 1988 Evinrude 70 hp that wont stay running. I know its a fuel problem because you can sputter out and turn around and go, by pushing the choke in and out and when you get down on it it will run fine by holding the choke in. The problem is that I dont want to replace anything I dont have to so if anyone has any suggestions I would appriciate it. The motor had a VRO but someone bypassed it and put a regular fuel pump on it. Thanks Carbs need a serious cleaning or rebuild. Eisboch |
#3
![]()
posted to rec.boats
|
|||
|
|||
![]()
On Feb 13, 6:24*pm, Thunder wrote:
I came across a 1988 Evinrude 70 hp that wont stay running. I know its a fuel problem because you can sputter out and turn around and go, by pushing the choke in and out and when you get down on it it will run fine by holding the choke in. The problem is that I dont want to replace anything I dont have to so if anyone has any suggestions I would appriciate it. The motor had a VRO but someone bypassed it and put a regular fuel pump on it. Thanks do a carb kit... that's where I would start |
#4
![]()
posted to rec.boats
|
|||
|
|||
![]() wrote in message ... On Feb 13, 6:24 pm, Thunder wrote: I came across a 1988 Evinrude 70 hp that wont stay running. I know its a fuel problem because you can sputter out and turn around and go, by pushing the choke in and out and when you get down on it it will run fine by holding the choke in. The problem is that I dont want to replace anything I dont have to so if anyone has any suggestions I would appriciate it. The motor had a VRO but someone bypassed it and put a regular fuel pump on it. Thanks do a carb kit... that's where I would start --------------------------------- Two great minds with a single thought ..... Eisboch |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
77 Evinrude 6hp ignition problem | General | |||
`72 Evinrude V4 Problem | General | |||
Evinrude 4 stroke 70 problem | General | |||
Evinrude 25 hp problem | General | |||
Evinrude 30HP problem | UK Power Boats |