Maybe taking the plunge...
 

On Sun, 25 Nov 2007 07:10:42 -0800 (PST),
wrote:

On Nov 25, 9:34 am, "Eisboch" wrote:
"Short Wave Sportfishing" wrote in messagenews:avsik3liefqlkk4qg0idfd05ghef6lg3ch@4ax .com...

I'm thinking of building a boat.

That is all. :)

If steel or alumium I can arrange for metal fab and welding.

Hmmm.... that gives me an idea.

I need to find an excellent naval architect.

I have access to one or two if you are serious...

Something occurred to me after we were talking the other night.

I wonder if there are plans out there for, say, 18' Novi type hull,
CC. Something like this only with a after of center outboard well.

http://www.bateau.com/proddetail.php?prod=PG20&cat=29

The second thing that occurred to me is that I have all that pine
under the addition (you've seen that mass of wood) - if I had that
resawn to 3/8" would that work as planking? Or built it as lap
strake?

I have access to all kinds of red and white oak for ribs and such.

I think I need to give you another call to discuss it.

Maybe taking the plunge...
 

On Sun, 25 Nov 2007 16:25:45 GMT, Short Wave Sportfishing
wrote:

On Sun, 25 Nov 2007 07:10:42 -0800 (PST),
wrote:

On Nov 25, 9:34 am, "Eisboch" wrote:
"Short Wave Sportfishing" wrote in messagenews:avsik3liefqlkk4qg0idfd05ghef6lg3ch@4ax .com...

I'm thinking of building a boat.

That is all. :)

If steel or alumium I can arrange for metal fab and welding.

Hmmm.... that gives me an idea.

I need to find an excellent naval architect.

I have access to one or two if you are serious...

Something occurred to me after we were talking the other night.

I wonder if there are plans out there for, say, 18' Novi type hull,
CC. Something like this only with a after of center outboard well.

http://www.bateau.com/proddetail.php?prod=PG20&cat=29

The second thing that occurred to me is that I have all that pine
under the addition (you've seen that mass of wood) - if I had that
resawn to 3/8" would that work as planking? Or built it as lap
strake?

I have access to all kinds of red and white oak for ribs and such.

I think I need to give you another call to discuss it.

Or maybe this.

http://www.bateau.com/proddetail.php?prod=OD18&cat=29

Maybe taking the plunge...
 

On Nov 25, 11:25 am, Short Wave Sportfishing
wrote:
On Sun, 25 Nov 2007 07:10:42 -0800 (PST),

wrote:
On Nov 25, 9:34 am, "Eisboch" wrote:
"Short Wave Sportfishing" wrote in messagenews:avsik3liefqlkk4qg0idfd05ghef6lg3ch@4ax .com...

I'm thinking of building a boat.

That is all. :)

If steel or alumium I can arrange for metal fab and welding.

Hmmm.... that gives me an idea.

I need to find an excellent naval architect.

I have access to one or two if you are serious...

Something occurred to me after we were talking the other night.

I wonder if there are plans out there for, say, 18' Novi type hull,
CC. Something like this only with a after of center outboard well.

http://www.bateau.com/proddetail.php?prod=PG20&cat=29

The second thing that occurred to me is that I have all that pine
under the addition (you've seen that mass of wood) - if I had that
resawn to 3/8" would that work as planking? Or built it as lap
strake?

I have access to all kinds of red and white oak for ribs and such.

I think I need to give you another call to discuss it.

Grrrrrr.... check your e-mail man;)

Maybe taking the plunge...
 

On Nov 25, 11:31 am, Short Wave Sportfishing
wrote:
On Sun, 25 Nov 2007 16:25:45 GMT, Short Wave Sportfishing





wrote:
On Sun, 25 Nov 2007 07:10:42 -0800 (PST),
wrote:

On Nov 25, 9:34 am, "Eisboch" wrote:
"Short Wave Sportfishing" wrote in messagenews:avsik3liefqlkk4qg0idfd05ghef6lg3ch@4ax .com...

I'm thinking of building a boat.

That is all. :)

If steel or alumium I can arrange for metal fab and welding.

Hmmm.... that gives me an idea.

I need to find an excellent naval architect.

I have access to one or two if you are serious...

Something occurred to me after we were talking the other night.

I wonder if there are plans out there for, say, 18' Novi type hull,
CC. Something like this only with a after of center outboard well.

http://www.bateau.com/proddetail.php?prod=PG20&cat=29

The second thing that occurred to me is that I have all that pine
under the addition (you've seen that mass of wood) - if I had that
resawn to 3/8" would that work as planking? Or built it as lap
strake?

I have access to all kinds of red and white oak for ribs and such.

I think I need to give you another call to discuss it.

Or maybe this.

http://www.bateau.com/proddetail.php?prod=OD18&cat=29- Hide quoted text -

- Show quoted text -

With slightly more effort you can build a wooden boat, that looks like
a wooden boat, and holds up like a composite... looks do count;)

Maybe taking the plunge...
 

On Sun, 25 Nov 2007 08:42:46 -0800 (PST),
wrote:

On Nov 25, 11:25 am, Short Wave Sportfishing
wrote:
On Sun, 25 Nov 2007 07:10:42 -0800 (PST),

wrote:
On Nov 25, 9:34 am, "Eisboch" wrote:
"Short Wave Sportfishing" wrote in messagenews:avsik3liefqlkk4qg0idfd05ghef6lg3ch@4ax .com...

I'm thinking of building a boat.

That is all. :)

If steel or alumium I can arrange for metal fab and welding.

Hmmm.... that gives me an idea.

I need to find an excellent naval architect.

I have access to one or two if you are serious...

Something occurred to me after we were talking the other night.

I wonder if there are plans out there for, say, 18' Novi type hull,
CC. Something like this only with a after of center outboard well.

http://www.bateau.com/proddetail.php?prod=PG20&cat=29

The second thing that occurred to me is that I have all that pine
under the addition (you've seen that mass of wood) - if I had that
resawn to 3/8" would that work as planking? Or built it as lap
strake?

I have access to all kinds of red and white oak for ribs and such.

I think I need to give you another call to discuss it.

Grrrrrr.... check your e-mail man;)

Done and done.

Sent a quick reply. Thanks for the advice. I'll call you later this
afternoon.

Maybe taking the plunge...
 

"Short Wave Sportfishing" wrote in message
...

I wonder if there are plans out there for, say, 18' Novi type hull,
CC. Something like this only with a after of center outboard well.

http://www.bateau.com/proddetail.php?prod=PG20&cat=29



Check this guy out .... I've been looking at his steel hull trawler plans.

http://www.bruceroberts.com/public/H...OAT_DESIGN.htm

Eisboch

Maybe taking the plunge...
 

On Nov 25, 11:52 am, Short Wave Sportfishing
wrote:
On Sun, 25 Nov 2007 08:42:46 -0800 (PST),



wrote:
On Nov 25, 11:25 am, Short Wave Sportfishing
wrote:
On Sun, 25 Nov 2007 07:10:42 -0800 (PST),

wrote:
On Nov 25, 9:34 am, "Eisboch" wrote:
"Short Wave Sportfishing" wrote in messagenews:avsik3liefqlkk4qg0idfd05ghef6lg3ch@4ax .com...

I'm thinking of building a boat.

That is all. :)

If steel or alumium I can arrange for metal fab and welding.

Hmmm.... that gives me an idea.

I need to find an excellent naval architect.

I have access to one or two if you are serious...

Something occurred to me after we were talking the other night.

I wonder if there are plans out there for, say, 18' Novi type hull,
CC. Something like this only with a after of center outboard well.

http://www.bateau.com/proddetail.php?prod=PG20&cat=29

The second thing that occurred to me is that I have all that pine
under the addition (you've seen that mass of wood) - if I had that
resawn to 3/8" would that work as planking? Or built it as lap
strake?

I have access to all kinds of red and white oak for ribs and such.

I think I need to give you another call to discuss it.

Grrrrrr.... check your e-mail man;)

Done and done.

Sent a quick reply. Thanks for the advice. I'll call you later this
afternoon.

Look into the Tolman Skiffs, it took me 1 yr to build my 20'

Maybe taking the plunge...
 

On Sun, 25 Nov 2007 12:44:43 -0500, "Eisboch"
wrote:


"Short Wave Sportfishing" wrote in message
.. .

I wonder if there are plans out there for, say, 18' Novi type hull,
CC. Something like this only with a after of center outboard well.

http://www.bateau.com/proddetail.php?prod=PG20&cat=29

Check this guy out .... I've been looking at his steel hull trawler plans.

http://www.bruceroberts.com/public/H...OAT_DESIGN.htm

I like some of the fishing/work boat plans.

Don't know if I want to build in aluminum or steel though.

Maybe taking the plunge...
 

On Nov 25, 7:10 am, Short Wave Sportfishing
wrote:
I'm thinking of building a boat.

That is all. :)

Easily done, but labor intensive, minimal tools and skill required.

http://galenfrysinger.us/1/hires/newguinea152.jpg

Maybe taking the plunge...
 

On Nov 25, 12:41 pm, Tim wrote:
On Nov 25, 7:10 am, Short Wave Sportfishing
wrote:

I'm thinking of building a boat.

That is all. :)

Easily done, but labor intensive, minimal tools and skill required.

http://galenfrysinger.us/1/hires/newguinea152.jpg

try this one instead:

http://cache.viewimages.com/xc/34162...5A1E4F32AD3138