Home |
Search |
Today's Posts |
#1
![]()
posted to rec.boats
|
|||
|
|||
![]()
I need some info in setting up a livewell in my boat. I have a 18-ft
center console, and it doesn't come with a livewell. I am thinking of setting up a livewell either in the stern or near the bow. The specific info that I am looking for a o How big a livewell should a 18-ft boat have? I know this is kind of an open-ended question. But I am just looking for a "rule of thumb" kind of thing. Based on discussion from the web, I am under the impression that a livewell that comes with a boat tends to be smaller than it should be. I figure that if a livewell that comes with a 18-ft boat tends to come with a X-gal water tank, I may do well with a X-plus-20% water tank for the live well. o Where is the thru-hull fitting for water-intake installed? Does it have to be installed all the way near the rear bottom of the boat in order to extract water when the boat is on plane? I guess it should. But I am wondering whether this may disrupt the water flow and make the boat hard to get on plane. o Can the pump suck water into the thru-hull fitting while the boat is running in high speed? You see I have a hard time visualizing the water getting sucked into the thru hull fitting when the water is passing by very fast. o There is something called "transom mounted livewell pump". Can it suck water while the boat is on plane? I cannot see how it will work because the pipe for the water intake must go below the bottom of the boat and cause a lot of disruption on the water flow, right? Thanks in advance for any info. Jay Chan |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
four-barrel setting | General | |||
Outboard pitch setting | General | |||
trim tab vane setting | General | |||
Setting Bungs outside | Boat Building | |||
LiveWell Leaking | General |