"Bennie" u31788@uwe wrote in message news:6ddc5da40cf71@uwe...

It is on the same circuit as the coil...When ign switch is off - no
fuel....

Eisboch wrote:

How did you power the electric fuel pump? In the event that you didn't
....
consider providing it's power in a manner that the power is removed if the
engine is not running, even though the ignition may be "on". Often, this
is
accomplished by powering it through an oil pressure switch.


I suspected that might have been the case when you mentioned that you were
new to boats.
I've been advised by someone far more knowledgeable than I that it should
only be powered
if the engine is running .... via oil switch or other sensor ... and not
powered from the
ignition switch only. Unlike a car or truck, on a boat you don't want the
potential of the fuel
pump pouring fuel on a fire.

If carbureted, you also want the bowl overflow to be plumbed back to the
fuel supply line before the pump and not simply dumped into the bilge like
an automotive carb would do.

Just stuff to think about.

Eisboch