Home |
Search |
Today's Posts |
|
#1
![]()
posted to rec.boats
|
|||
|
|||
![]() JimH wrote: "Eisboch" wrote in message ... " JimH" not telling you @ pffftt.com wrote in message ... If the bilge pump has to be replaced it is an easy do it yourself project. You should not need a charger if the bilge pump is the only thing left on when leaving the boat. In any case do not run an extension cord to leave a 110v charger running..........you are inviting electrolysis problems on your boat and those surrounding yours. Might want to re-think that advise. 1. Bilge pumps can run batteries down during periods of heavy rains and the owner doesn't get to the boat often. 2. Electrolysis is not so much of a problem in freshwater. 3. If you are correct, I better go down to the marina and tell the 300 boats or so to shut off their battery chargers that are left running all summer (and winter, in some cases). 4. Properly set up and protected, the potential for electrolysis can be controlled. Eisboch Fair enough. I was repeating advice I was given by a friend of mine who is an electrical engineer with NASA. David Pascoe also agrees. http://www.yachtsurvey.com/corrosion_in_marinas.htm And electrolysis is a concern even in freshwater. Remember, we are not talking about permanently mounted chargers but portable battery chargers run off extension cords. YMMV. Eisboch didn't even come close to saying that electrolysis wouldn't happen. He said it could be controlled so that it's minimal, and it can. With it being correctly controlled, it's a hell of a lot better than sinking the boat. Did you ask your electrical engineer whether he'd rather control electrolysis or have his boat sink because the battery ran down?? |
#2
![]()
posted to rec.boats
|
|||
|
|||
![]()
basskisser wrote:
JimH wrote: "Eisboch" wrote in message ... " JimH" not telling you @ pffftt.com wrote in message ... If the bilge pump has to be replaced it is an easy do it yourself project. You should not need a charger if the bilge pump is the only thing left on when leaving the boat. In any case do not run an extension cord to leave a 110v charger running..........you are inviting electrolysis problems on your boat and those surrounding yours. Might want to re-think that advise. 1. Bilge pumps can run batteries down during periods of heavy rains and the owner doesn't get to the boat often. 2. Electrolysis is not so much of a problem in freshwater. 3. If you are correct, I better go down to the marina and tell the 300 boats or so to shut off their battery chargers that are left running all summer (and winter, in some cases). 4. Properly set up and protected, the potential for electrolysis can be controlled. Eisboch Fair enough. I was repeating advice I was given by a friend of mine who is an electrical engineer with NASA. David Pascoe also agrees. http://www.yachtsurvey.com/corrosion_in_marinas.htm And electrolysis is a concern even in freshwater. Remember, we are not talking about permanently mounted chargers but portable battery chargers run off extension cords. YMMV. Eisboch didn't even come close to saying that electrolysis wouldn't happen. He said it could be controlled so that it's minimal, and it can. With it being correctly controlled, it's a hell of a lot better than sinking the boat. Did you ask your electrical engineer whether he'd rather control electrolysis or have his boat sink because the battery ran down?? If the original poster was thinking of using a non marine portable charger, and running ordinary extension cords from an electrical outlet not properly grounded, and exposed to the elements, that would not only not be prudent and but it could be deadly. Electrolysis could be the least of his problems. If he has his electrical outlet properly installed for marine environment, and is using a marine shore power extension cord, it really should not be a problem. David Pascoe article was emphasizing what you need to do to use electricity safely in a marina, and what can happen if people do not have their electrical systems properly grounded. I don't know why, but I have NEVER had a problem with my zincs or the outdrive corroding or showing any signs of electrolysis. If I did, I would contract the marina immediately so they could track down the boat causing the problem. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Bilge Pump Upgrade | Boat Building | |||
Propane Sniffer Meltdown | Cruising | |||
Bilge pump switch | Cruising | |||
Bilge Pump Switch | Cruising | |||
Bilge Pump Switch | Electronics |