Home |
Search |
Today's Posts |
|
#1
![]()
posted to rec.boats
|
|||
|
|||
![]() "AL" wrote in message ups.com... This past weekend after a heavy rain, I took my boat (2050 bayliner capri,2000 mercruiser 5.0L 350 engine) from my dock to take it out of the water. Unfortunately, I did not run my bilge pump nearly long enough and wound up stalling out in the bay. After getting towed to the put in and back to the house, I found water in the oil which I promptly changed, and cranked the engine up. It cranked immediately and ran for about 10 to 15 seconds, then died again. So I changed the fuel filter (filled with gas first) and now I cant get fuel to the carb. Have I lost my prime in the fuel pump, if so, how can I get it primed back or is the pump gone or am I missing something? You got enough water in the bilge from heavy rain to get water in your oil and gas? That boat must have been half submerged. No automatic bilge pump? Something doesn't make sense. Eisboch |
#2
![]()
posted to rec.boats
|
|||
|
|||
![]()
Eisboch wrote:
"AL" wrote in message ups.com... This past weekend after a heavy rain, I took my boat (2050 bayliner capri,2000 mercruiser 5.0L 350 engine) from my dock to take it out of the water. Unfortunately, I did not run my bilge pump nearly long enough and wound up stalling out in the bay. After getting towed to the put in and back to the house, I found water in the oil which I promptly changed, and cranked the engine up. It cranked immediately and ran for about 10 to 15 seconds, then died again. So I changed the fuel filter (filled with gas first) and now I cant get fuel to the carb. Have I lost my prime in the fuel pump, if so, how can I get it primed back or is the pump gone or am I missing something? You got enough water in the bilge from heavy rain to get water in your oil and gas? That boat must have been half submerged. No automatic bilge pump? Something doesn't make sense. Eisboch Eisboch, What I guessed he did was threw water all over the engine compartment by water hitting the fan belts, and the water was ingested into the carb / fuel injectors. This would be possible with 6 to 8" of water in the bilge as the boat was coming on and off plane and the water was sloshing back and forth in the bilge. What made no sense to me at all, is how water got into the fuel filter. I would have thought the boat would have been submerged to to effect the fuel filter and at that point you would not be starting the engine. -- Reggie That's my story and I am sticking to it! |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Let there be heat! | General | |||
Contents of vacuum bag | General | |||
fyi ... MCM185R and fuel pump filter | General | |||
Ignorant Dupes | ASA |