A quick note to all..... I had purchased the expansion plugs that
utilize the bolt to set in place. As I had expected, I could nt get to

one of the holes due to the motor mount. The explanation on how to
remove the mount while bracing the motor with a bottle jack worked
great! I was able to easily install the plug and re-install the motor
mount. Once this was completed, I put on the ear muffs and started the

engine..... NO LEAKS!!!!!!


I do have one more question before I can return to the waters.....
The discharge of the water is not only coming out of the center of the
prop but also at the base of the lower unit (at the point where it
attaches to the boat). There is a plate that is bolted in this area
and I want to ensure this is a dischargearea for the water.


Jeff