Home |
Search |
Today's Posts |
|
#1
![]()
posted to rec.boats
|
|||
|
|||
![]() "Jens_Erik" wrote in message ups.com... I just bought a used Bayliner Trophy 23 foot and the engine is OMC 5.7 1989 (model 574 APRMED), i believe it has 250 HP. The prop is 15'' x 17''. But the max rpm I get is 3400. Is that the maximum rpm on this type OMC engine? I should think it lacks at least 1000 more rpm. I believe the engine should be able to get at least 4400 rpm at WOT. The max speed i currently get is just 24 knots. The engine seems fine and I just replaced the spark plugs. Anyone has ideas of what could be wrong? Thanks Jens-Erik Nuuk, Greenland My boat: http://www.123hjemmeside.dk/Nukappiaaluk/1442331 It's hard to tell, not knowing what the original prop was, how much that boat weighs, (is it waterlogged?) or how you have it loaded. Assuming there are no problems with the engine, coil, carb, etc., it is possible that the previous owner installed a higher pitch prop, thinking it would go faster (common mistake). FWIW, one of my first boats, a 1982 Century with a 5.7 L engine and alpha drive had a similar prop (17 pitch) when I first bought it used and the engine would only get to about the same RPM (3200-3400). I had to drop to a 12 pitch prop to get the RPMs up to over 4200. RCE |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
1989 Sea Ray 220 - help please? | General | |||
MOMA Spring Quarterly 1989 | ASA | |||
Johnson (1989) 30hp overheat problem | General | |||
FS: 1989 Regal Ambassador | General | |||
FS 1989 Regal Ambassador in Long Island, NY | Marketplace |