Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #11   Report Post  
posted to rec.boats
Del Cecchi
 
Posts: n/a
Default Bow-Mount Trolling Motor Recommendations

wrote:
Del Cecchi wrote:

wrote:

Ray Bates wrote:


I'm in process of rigging a new fishing boat (18', wgt approx 1400 lbs incl.
boat, motor gas and equipment) and want to put a bow-mounted trolling motor
on it. Any recommendations? Are the ones which are wireless controlled a
good buy? Minn-kota vs Motor Guide? 12v vs. 24v (I'm a casual fisherman
not out there everyday).

I've owned Minn-Kota transom mounted motors before and liked them, but have
no experience with bow-mounted motors.

Anything I should be particularly cautious of?

Thanks,

Ray


Seem like you only need a 12-volt trolling motor. According to
Minn-Kota tech support:

I am sorry but we do not have a listing that shows
what size motor works on which boat. There are
just so many different styles of boats out there that
it is not possible to maintain that sort of database.
I can tell you that each of our motors are designed
to push around a certain amount of weight.
Our 30 lbs. thrust motors will handle a total boat
weight up to around 1500 lbs.
Our 40 lbs. thrust motors up to around 2000 lbs.
Our 55 lbs. thrust motors up to around 2700 lbs.
Our 70 lbs. thrust motors up to around 3500 lbs
Our 80 lbs. thrust motors up to around 4000 lbs.
The 12 volt systems are up to 55 lbs. thrust.
The 24 volt systems would be 70 or 80 lbs. thrust.

Seem like your 18-ft boat is very light. The total weight (1400-lb)
plus two adults (360-lb), one extra battery (55-lb) for the trolling
motor, and the trolling motor itself (...) will be only around 1900-lb
to 2000-lb. According to the spec shown above, you will only need a
trolling motor that can provide 40-lb thrust. If you want a bit more
room for calculation error, you will go for a 55-lb thrust model, and
that still only needs a 12-volt system.

I am under the impression that we can use the trolling motor to bring
us back home in case the outboard motor dies as long as we are not that
far away from the shore and the current is not strong. This means this
is a good idea to get a heavy long run-time deep cycle battery. This
costs more; but you only need one for the 12-volt trolling motor
anyway.

My 18-ft Sea Ray center console is 2260-lb with motor, gas, equipments.
Because I start with much heavier weight than yours, I will have to
get a 24-volt trolling motor after adding 4 adults, trolling motor and
extra batteries. This means I need _two_ 12-volt deep cycle batteries
... ~$$~

No, I haven't got a trolling motor for my boat yet (too cold for
working on the boat). Therefore, I cannot give you any personal
experience.

Jay Chan


I would go with the 24 volt, and I really like the auto pilot/powerdrive
feature, or the wireless.

I have a minnkota and it is fine. I have the 65 pound one on a lund 18
foot fishing boat. I might get the 70 or 80 next time, although I
haven't needed more so far. Also make sure the shaft is long enough for
your boat.

--
Del Cecchi
"This post is my own and doesn't necessarily represent IBM's positions,
strategies or opinions."



How heavy is your 18-ft Lund boat? Because it is from Lund, I believe
it must be an aluminum boat, and must be lighter than a fiberglass
boat.

Why do you need to upgrade from 65-pound thrust to 80? Is there
something that the 65-pound thrust cannot do?

I am asking these because I am planning to get a 80-lb thrust trolling
motor for my 18-ft fiberglass boat that must be heavier than yours. If
you want a 80-lb thrust trolling motor for your 18-ft boat that is
lighter than mine, this may suggest that an 80-lb trolling motor "may"
not be enough for me.

Thanks in advance for any info.

Jay Chan

It's a 1775 pro vee aluminum which dry is about 1200 lb as I recall.
Add gas, live wells, 3 batteries, and a 115 2stroke, and me and it is
maybe as much as 2500 lb. I rarely run the trolling motor at full
power. But I find fishing in big waves rather unpleasant so I don't do
it very often.

--
Del Cecchi
"This post is my own and doesn’t necessarily represent IBM’s positions,
strategies or opinions.”
  #12   Report Post  
posted to rec.boats
 
Posts: n/a
Default Bow-Mount Trolling Motor Recommendations

Del Cecchi wrote:
wrote:
Del Cecchi wrote:

wrote:

Ray Bates wrote:


I'm in process of rigging a new fishing boat (18', wgt approx 1400 lbs incl.
boat, motor gas and equipment) and want to put a bow-mounted trolling motor
on it. Any recommendations? Are the ones which are wireless controlled a
good buy? Minn-kota vs Motor Guide? 12v vs. 24v (I'm a casual fisherman
not out there everyday).

I've owned Minn-Kota transom mounted motors before and liked them, but have
no experience with bow-mounted motors.

Anything I should be particularly cautious of?

Thanks,

Ray


Seem like you only need a 12-volt trolling motor. According to
Minn-Kota tech support:

I am sorry but we do not have a listing that shows
what size motor works on which boat. There are
just so many different styles of boats out there that
it is not possible to maintain that sort of database.
I can tell you that each of our motors are designed
to push around a certain amount of weight.
Our 30 lbs. thrust motors will handle a total boat
weight up to around 1500 lbs.
Our 40 lbs. thrust motors up to around 2000 lbs.
Our 55 lbs. thrust motors up to around 2700 lbs.
Our 70 lbs. thrust motors up to around 3500 lbs
Our 80 lbs. thrust motors up to around 4000 lbs.
The 12 volt systems are up to 55 lbs. thrust.
The 24 volt systems would be 70 or 80 lbs. thrust.

Seem like your 18-ft boat is very light. The total weight (1400-lb)
plus two adults (360-lb), one extra battery (55-lb) for the trolling
motor, and the trolling motor itself (...) will be only around 1900-lb
to 2000-lb. According to the spec shown above, you will only need a
trolling motor that can provide 40-lb thrust. If you want a bit more
room for calculation error, you will go for a 55-lb thrust model, and
that still only needs a 12-volt system.

I am under the impression that we can use the trolling motor to bring
us back home in case the outboard motor dies as long as we are not that
far away from the shore and the current is not strong. This means this
is a good idea to get a heavy long run-time deep cycle battery. This
costs more; but you only need one for the 12-volt trolling motor
anyway.

My 18-ft Sea Ray center console is 2260-lb with motor, gas, equipments.
Because I start with much heavier weight than yours, I will have to
get a 24-volt trolling motor after adding 4 adults, trolling motor and
extra batteries. This means I need _two_ 12-volt deep cycle batteries
... ~$$~

No, I haven't got a trolling motor for my boat yet (too cold for
working on the boat). Therefore, I cannot give you any personal
experience.

Jay Chan


I would go with the 24 volt, and I really like the auto pilot/powerdrive
feature, or the wireless.

I have a minnkota and it is fine. I have the 65 pound one on a lund 18
foot fishing boat. I might get the 70 or 80 next time, although I
haven't needed more so far. Also make sure the shaft is long enough for
your boat.

--
Del Cecchi
"This post is my own and doesn't necessarily represent IBM's positions,
strategies or opinions."



How heavy is your 18-ft Lund boat? Because it is from Lund, I believe
it must be an aluminum boat, and must be lighter than a fiberglass
boat.

Why do you need to upgrade from 65-pound thrust to 80? Is there
something that the 65-pound thrust cannot do?

I am asking these because I am planning to get a 80-lb thrust trolling
motor for my 18-ft fiberglass boat that must be heavier than yours. If
you want a 80-lb thrust trolling motor for your 18-ft boat that is
lighter than mine, this may suggest that an 80-lb trolling motor "may"
not be enough for me.

Thanks in advance for any info.

Jay Chan

It's a 1775 pro vee aluminum which dry is about 1200 lb as I recall.
Add gas, live wells, 3 batteries, and a 115 2stroke, and me and it is
maybe as much as 2500 lb. I rarely run the trolling motor at full
power. But I find fishing in big waves rather unpleasant so I don't do
it very often.

--
Del Cecchi
"This post is my own and doesn't necessarily represent IBM's positions,
strategies or opinions."


Seem like your boat is more or less the same weight as mine (assuming
you weights around 200-lbs) (we both have 115-hp 2-stroke motor). This
is odd; I thought aluminum boat is lighter than a fiberglass boat like
mine.

Anyway, I accept your number as is. Sound like you are not taxing your
80-lbs thrust trolling motor. Great! This means I should also be well
served by a 80-lbs thrust trolling motor because our boats weight
around the same. Thanks for the good news.

Jay Chan

Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
The Best Way to Provide 24-volt for a 24-volt Trolling Motor? [email protected] General 8 November 16th 05 03:18 AM
How to Bow Mount a Trolling Motor on a Center Console? -- FollowUp [email protected] General 0 November 7th 05 04:20 PM
motor HP for 16-18' flat bottom aluminum boat for trolling? [email protected] General 2 October 20th 05 05:53 AM
Bow Mount a Trolling Motor on a Center Console That Has Railing? [email protected] General 19 October 14th 05 02:53 AM
How to Bow Mount a Trolling Motor on a Center Console? [email protected] General 13 October 6th 05 04:33 PM


All times are GMT +1. The time now is 02:20 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017