Home |
Search |
Today's Posts |
#8
|
|||
|
|||
Jabsco Head - help!
Lloyd, all you have to do to solve the problem is call Jabsco and tell
'em you need a 1.5" straight or 90 discharge fitting for your new toilet. Peggie ---------- Peggie Hall Specializing in marine sanitation since 1987 Author "Get Rid of Boat Odors - A Guide To Marine Sanitation Systems and Other Sources of Aggravation and Odor" http://shop.sailboatowners.com/detai...=400&group=327 http://www.seaworthy.com/html/get_ri...oat_odors.html Lloyd Sumpter wrote: Hi, Just getting my new holding tank in, and have discovered that the reason the discharge hose was leaking at the head was that the outlet fitting is too small. The hose fits over it easily instead of barely squeezing on - seems like it's for maybe 1 3/8" ID hose or something (my hose is 1 1/2" ID). I remember the problem: I replaced the old head (Cheap Wilcox?) with a cheap manual Jabsco (I know, but it seems to work fine, and I like being able to flush without a battery), but the 45 deg outlet wouldn't work with my plumbing. I used the outlet off the old head, which fit the head fine, but doesn't seem to fit the hose. Any ideas? can I get a 90-deg outlet for the Jabsco? Some kind of adapter? Peggy? (got your book - Good Stuff!) Lloyd Sumpter "Far Cove" Catalina 36 - with the biggest holding tank! |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
The ol' Jabsco 37010 | General | |||
Nannidiesel 2.50 - 14HP : used 88 hrs then cylinder head gasket failure ! | General | |||
Water accumulating in front of head on Sea Ray 240DA | General |