![]() |
|
Auto Pilot for trolling
On Sat, 07 Jan 2006 22:33:44 -0500, Harry Krause
wrote: I'm not convinced "coring" is a good thing below the waterline, and I sure as hell wouldn't consider a boat with balsa coring anywhere. I have, however, owned a couple of boats with klegecell foam in the transom, but that application is nothing like the foam used between layers of fiberglass in the hull. The longevity of balsa cored decks and hulls has not been impressive. I know of a number of balsa cored sailboats that were junked because the cost of repairs exceeded the value of the boat. Foam cores seem to do better but they are not immune, and when they do fail, it is sometimes in spectacular fashion. Do you remember the America's Cup contender that literally broke in two and sank within seconds? |
Auto Pilot for trolling
"Art Yokell" wrote ... We have a 30' grady which we use mostly for fishing. We had installed a C series Raymarine GPS, Fish Finder and a 4' open array radar. I had hoped to install a decent auto pilot this winter. I am getting a bunch of jazz from Ray and a reccomendation for a $4,000 system plus the cost of install. I find out that this system is not reccomended for slow speeds nd doesn't have any predetermined trolling patterns as part of the system. I wonder if anyone here might have an alternate suggestion that will work and not be so outrageously expensive. Thanks for any ideas. I use a Nautamatic TR-1 gold on the kicker and it works pretty well. It runs about $2300 if I recall correctly. It has a zig-zag pattern but I've never tried it. http://www.nautamatic.com/ -rick- |
Auto Pilot for trolling
One thing to keep in mind...
the installation and more importantly the proper set up and calibration is the key to success with any autopilot....get someone who thoroughly knows not only how to install it but also how to use it...it can make all the difference... regards, markvictor http://groups.google.com/group/badboatbiz |
Auto Pilot for trolling
One thing to keep in mind...
the installation and more importantly the proper set up and calibration is the key to success with any autopilot....get someone who thoroughly knows not only how to install it but also how to use it...it can make all the difference... regards, markvictor http://groups.google.com/group/badboatbiz |
Auto Pilot for trolling
One thing to keep in mind...
the installation and more importantly the proper set up and calibration is the key to success with any autopilot....get someone who thoroughly knows not only how to install it but also how to use it...it can make all the difference... regards, markvictor http://groups.google.com/group/badboatbiz |
Auto Pilot for trolling
"Wayne.B" wrote in message ... On Sat, 07 Jan 2006 20:31:13 -0500, Harry Krause wrote: A dealer I know told me that most boat new boat prices will be up more than usual in the spring because of higher petrol prices. Oil has an impact on manufacture and on delivery. ========================================== Oil had a huge impact on boat prices between the mid 70s and mid 80s. The price of new boats just about tripled in 10 years, and people were selling used boats for 50 to 100% over what they had paid originally. That was about the time when exotic coring materials became popular because they not only made boats lighter and faster, but also cheaper to build because of reduced fiberglass/resin content. I am getting ready to replace the back redwood deck with Trex. Price is up about 8% in the last 2 months, just because of the oil content. But the petro used for the plastic part and the energy to make it. |
Auto Pilot for trolling
"Bill McKee" wrote in message ink.net... I am getting ready to replace the back redwood deck with Trex. Price is up about 8% in the last 2 months, just because of the oil content. But the petro used for the plastic part and the energy to make it. Stuff is great but if you haven't done it before make sure you predrill for any screws that are within an inch or so of the edge of the planks. It's not supposed to split, but it does. (Learned this the hard way) Eisboch |
Auto Pilot for trolling
"Eisboch" wrote in message ... "Bill McKee" wrote in message ink.net... I am getting ready to replace the back redwood deck with Trex. Price is up about 8% in the last 2 months, just because of the oil content. But the petro used for the plastic part and the energy to make it. Stuff is great but if you haven't done it before make sure you predrill for any screws that are within an inch or so of the edge of the planks. It's not supposed to split, but it does. (Learned this the hard way) Eisboch Buddy did his deck, and I have been informed. |
Auto Pilot for trolling
Art,
Slow speed trolling with an autopilot on a small boat like yours can be a problem on days where you have a bit of a sea, and wind, to contend with. Now when you talk about slow speed I assume your talking about 2 to 4 knots. As the speed increases, and the boat gets bigger, it's less of a problem. Your best bet is to ask people that have the same boat as yours if they have had problems, what system they have and how fast they troll. Don't feel too bad, I've run some larger boats that have a problem with this as well, they just don't run slow enough on two engines, you have to troll on one engine. All it takes is one wave at the right time and your back to manual fighting the boat. I've even seen them change props late in the season (smaller wheel or less pitch) so they can slow troll with both engines in gear. So if a system works OK most of the time, your probably doing better than most. |
Auto Pilot for trolling
Also,springing for the rate-sensor instead of the standard heading
sensor will help with low speed stability...You guessed it...more money... regards, markvictor |
All times are GMT +1. The time now is 04:28 AM. |
|
Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 BoatBanter.com