Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Pig Sick
 
Posts: n/a
Default Fishfinders - 3D or not 3D, that is the question.

I'm replacing my trusty old Lowrance X65 fishfinder and am considering
a 3D unit. It seems to make so much sense...and yet it's difficult to
hear a good word said for them on any Newsgroup. What's more, the
comments all seem very dated and may not relate to newer technology -
so what are the latest views?

My impression is that a few years ago there were more 3D units on offer
than now - that suggests either the market was a lot smaller than the
manufacturers thought or the technology couldn't meet the market need.

I'm fishing my home waters here in Scotland in the 70 - 250ft range (so
all these negative comments about 3D in shallow water aren't relevant)
in an area that is only lightly fished and about which there's little
local knowledge of underwater features, hotspots, wrecks etc (so 3D
sounds ideal).

Looking at the units available only the Hummingbird Matrix 47 3D comes
up and on paper it looks good. Their Matrix 37 with side-imaging looks
very impressive too - who could argue with the screen shots on their
website (http://www.humminbird.com/generic2.asp?ID=514)- have a look,
they're incredible. But looking at Newsgroup comments about Hummingbird
they come in for a slating.

So what's a guy to do? What's your considered view? Hummingbird bad? 3D
bad? Do I stick to 2D and keep looking at the sea bed through a
pin-hole?

  #2   Report Post  
 
Posts: n/a
Default

it looks interesting .... I am not a fisherman but could iamgine that
just by seing the fish on the screen doesnt mean you catch them or
they are stillt here by the time you get the hook down ..

I see fishfinders more useful to find the fishs depth and habitat
rather than the fish itself ...

I heard people say these 3D / forward looking units work well,
apparently commericlas use them ... but its "too easy" to catch fish
....

Also consider that the actual image you will get wont look as it does
on the screen ... it can be quiet a challenge to get a normal finder to
read properly a 6 beam transducer may be more difficult ...

Matt

  #3   Report Post  
Keith M
 
Posts: n/a
Default

I read the web site which says effective to 100ft
You are talking of 70 to 250ft
a.. Side beams are extremely narrow front to back providing "thin slices"
of the bottom for high resolution imaging.
b.. Side Beams look out to 240 feet, with a depth limitation of 100 feet.
Save your money unless you are into hydroghraphic surveying.

Keith M

"Pig Sick" wrote in message
ups.com...
I'm replacing my trusty old Lowrance X65 fishfinder and am considering
a 3D unit. It seems to make so much sense...and yet it's difficult to
hear a good word said for them on any Newsgroup. What's more, the
comments all seem very dated and may not relate to newer technology -
so what are the latest views?

My impression is that a few years ago there were more 3D units on offer
than now - that suggests either the market was a lot smaller than the
manufacturers thought or the technology couldn't meet the market need.

I'm fishing my home waters here in Scotland in the 70 - 250ft range (so
all these negative comments about 3D in shallow water aren't relevant)
in an area that is only lightly fished and about which there's little
local knowledge of underwater features, hotspots, wrecks etc (so 3D
sounds ideal).

Looking at the units available only the Hummingbird Matrix 47 3D comes
up and on paper it looks good. Their Matrix 37 with side-imaging looks
very impressive too - who could argue with the screen shots on their
website (http://www.humminbird.com/generic2.asp?ID=514)- have a look,
they're incredible. But looking at Newsgroup comments about Hummingbird
they come in for a slating.

So what's a guy to do? What's your considered view? Hummingbird bad? 3D
bad? Do I stick to 2D and keep looking at the sea bed through a
pin-hole?




  #4   Report Post  
Dom
 
Posts: n/a
Default Fishfinders - 3D or not 3D, that is the question.

Go with 4D. Not only will it show you where the fish are, but also when
they'll be there.


  #5   Report Post  
Steve Walker
 
Posts: n/a
Default Fishfinders - 3D or not 3D, that is the question.

In message ws.net,
Dom writes
Go with 4D. Not only will it show you where the fish are, but also when
they'll be there.


Would that be the sort you need a sonic screwdriver to fix?

--
Steve Walker


  #6   Report Post  
Dom
 
Posts: n/a
Default Fishfinders - 3D or not 3D, that is the question.

....and a laser wrench.


  #7   Report Post  
John
 
Posts: n/a
Default Fishfinders - 3D or not 3D, that is the question.

If you're still on the fence about 2D or 3D, this may help.

Since you're using your fishfinder for fishing a 3D unit may be of use
to you. Consider what kind of fish you are targeting. If these fish
seek bottom structure, then 3D may be of value to you.

Trade in features you don't use for a better quality unit. Look at your
current unit and figure what features you use and don't use.Dual
frequency is a handy feature. Your X65 is a single frequency unit, 192
khz I think. Bottom zoom is a seldom used feature.

If you're working with a budget consider buying a better quality 2D
unit instead of a lesser quality, but similarly price 3D unit.

If you're looking for another Lowrance, I do not believe that they make
a 3D unit. Humminbird's Matrix 47 (
http://www.humminbird.com/products.asp?ID=492 ) sells for less than
$500. Their new 900 series 947C (
http://www.humminbird.com/products.asp?ID=510 ) , which is color and
has a built in chart plotter, goes for about to $1600. We usually can
beat their prices and we ship to Europe. Let me know if you want exact
prices.

John
Retail4Wholesale.com

  #8   Report Post  
Pig Sick
 
Posts: n/a
Default Fishfinders - 3D or not 3D, that is the question.

Thanks for that, John. I was just going to get a better quality 2D unit
but then I thought, wait a minute, most of the magazine articles I read
are about people using their 2D units fishing over wrecks and banks
that are well-known features to all and sundry in the heavily used
waters they fish, mostly around England. I on the other hand am fishing
in remote, seldom (if ever) fished waters around my home in Scotland
(Google Earth 58degrees 1minute N, 5degrees 26minutes W), and though my
father and grandfather fished these same waters before me, none of us
know that much about the bottom features. The old marks don't seem to
work any more and I need to go prospecting. So, I thought, what better
way than to strap on a 3D? And if I want 2D mode I just flick a switch.
But I seem to be the only one thinking this way, which worries me a
tad.

I may yet come to you for a price for the Matrix 47 - I already got a
GPS.

Iain

  #9   Report Post  
Eisboch
 
Posts: n/a
Default Fishfinders - 3D or not 3D, that is the question.


"Pig Sick" wrote in message
oups.com...
Thanks for that, John. I was just going to get a better quality 2D unit
but then I thought, wait a minute, most of the magazine articles I read
are about people using their 2D units fishing over wrecks and banks
that are well-known features to all and sundry in the heavily used
waters they fish, mostly around England. I on the other hand am fishing
in remote, seldom (if ever) fished waters around my home in Scotland
(Google Earth 58degrees 1minute N, 5degrees 26minutes W), and though my
father and grandfather fished these same waters before me, none of us
know that much about the bottom features. The old marks don't seem to
work any more and I need to go prospecting. So, I thought, what better
way than to strap on a 3D? And if I want 2D mode I just flick a switch.
But I seem to be the only one thinking this way, which worries me a
tad.

I may yet come to you for a price for the Matrix 47 - I already got a
GPS.

Iain


I was wondering how this nice, polite and informative discussion popped up
here in wrecked.boats.

Then I noticed the cross-posting. They obviously don't belong here
otherwise they better start calling each other names soon.

Eisboch


  #10   Report Post  
PocoLoco
 
Posts: n/a
Default Fishfinders - 3D or not 3D, that is the question.

On Mon, 10 Oct 2005 19:36:07 -0400, "Eisboch" wrote:


"Pig Sick" wrote in message
roups.com...
Thanks for that, John. I was just going to get a better quality 2D unit
but then I thought, wait a minute, most of the magazine articles I read
are about people using their 2D units fishing over wrecks and banks
that are well-known features to all and sundry in the heavily used
waters they fish, mostly around England. I on the other hand am fishing
in remote, seldom (if ever) fished waters around my home in Scotland
(Google Earth 58degrees 1minute N, 5degrees 26minutes W), and though my
father and grandfather fished these same waters before me, none of us
know that much about the bottom features. The old marks don't seem to
work any more and I need to go prospecting. So, I thought, what better
way than to strap on a 3D? And if I want 2D mode I just flick a switch.
But I seem to be the only one thinking this way, which worries me a
tad.

I may yet come to you for a price for the Matrix 47 - I already got a
GPS.

Iain


I was wondering how this nice, polite and informative discussion popped up
here in wrecked.boats.

Then I noticed the cross-posting. They obviously don't belong here
otherwise they better start calling each other names soon.

Eisboch


His location is an island off the coast of Scotland, close to Baden Bay. Looks
pretty on Google Earth.

--
John H

"The trouble with our liberal friends is not that they're ignorant: It's just that they know so much that isn't so."

Ronald Reagan


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Another strip-plank question - a bit long Pete Boat Building 3 January 12th 04 08:03 PM
Propeller efficiency question (electric) MBS Boat Building 4 December 23rd 03 04:39 AM
Other choice and counterpoise question Earl Haase Electronics 3 October 31st 03 06:43 PM
Exhaust question on inboard 1958 Chris Craft Gary Warner Boat Building 5 September 25th 03 12:32 AM
Sunday's VHF antics.....and a question.. Electronics 8 September 13th 03 09:04 AM


All times are GMT +1. The time now is 01:53 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017