Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]()
Anyone with experience with Honda's 4 stroke engines. In particular, I am
interested in the 150 - 200 hp engines. Thanks! |
#2
![]() |
|||
|
|||
![]()
On Sat, 09 Aug 2003 02:48:28 GMT, "Dan"
wrote: Anyone with experience with Honda's 4 stroke engines. In particular, I am interested in the 150 - 200 hp engines. Thanks! If you talk to the crabbers whos pots are on the bottom in front of my house, they either HAVE a Honda outboard on the boat they make their living with....or.....they WANT a Honda outboard on the boat to replace the crap that's always broke.....like Johnsons. I think that speaks for itself. Noone runs an outboard motor more than an active crabber.....awful punishment. Larry Extremely intelligent life must exist in the universe. You can tell because they never tried to contact us. |
#3
![]() |
|||
|
|||
![]()
Honda is a good motors.
I did not see they had a 150hp but it could be very new? They show a 115/130hp @ ~500# (heavy) and they show a 200hp/225hp @ ~600# Yamaha has a 150hp (466#) and a 200hp/225hp @ ~600#. Suzuki has a 140hp (420#) and a 200/225/250hp @ ~600#. OMC has Suzuki make their 4 strokes now. These are all fuel injected 4 strokes. -- Bill Kiene Kiene's Fly Shop Sacramento, CA www.kiene.com "Dan" wrote in message ... Anyone with experience with Honda's 4 stroke engines. In particular, I am interested in the 150 - 200 hp engines. Thanks! |
#4
![]() |
|||
|
|||
![]() "Dan" wrote in message ... Anyone with experience with Honda's 4 stroke engines. In particular, I am interested in the 150 - 200 hp engines. Thanks! Clammers in Narragansett Bay have them, but I think they are 115s. I've never heard anything bad about them, but to tell the truth I've never heard anything outstanding about them either. I do know that you see them all the time on trailers at the Oakland Beach launch ramp and either the mechanics or the owners are working on them. Sometimes it's just a routine oil change, sometimes there are parts and pieces on a tarp in a neighboring parking slot. When I do hear about a four stroke it's always "it's so quiet", but never "man, I can run all day on two teaspoons of fuel". One clammer I asked directly (he was parked next to me changing his oil) said he'd never buy another one - changing the oil was a pain in the.... If I were in the market for a new engine, I'd do some research first on warranty repairs and their frequency. Later, Tom |
#5
![]() |
|||
|
|||
![]()
Dan
I have a 18 ft Lund with a 115 Honda. It is a year and a half old and for my fishing needs I think it is great motor. My old 17 ft. smokercraft had a Mariner 115 2 stroke. I gave up a little speed out of the hole and about 5 mph on the top end, but remember the Lund is a larger and heavier boat and the motor is also heavier. I gained an easier starting engine. It has started the first time from when I was fishing in the low 20's this spring to the hot days of July on the family vacation at the lake. the engine is VERY quite at idle or wide open. When trolling, I can get down to 2.0 MPH ( according to my GPS, fish finder says 1.5 MPH). I can pull my son up on his wakeboard with many horses to spare. It is better than my old 115 2 stole on gas. If I am doing a lot of trolling it is a lot better. If I am running wide open it is still better but not by as much. When I got the boat I had the choose between the Yamaha or the Honda 115. 4 stroke. The Honda was 100 lbs heavier but if I had to make the decision over again I would go Honda again. The Yamie is a nice engine but from my past experiences with the Honda it should out last any other brand. As far as oil change.......tilt the motor up place a cut off plastic milk container and place it under the filter and remove and allow to drain. When draining the oil have a drain pan handy and there should be no mess. Now.......after saying all this there is one 2 stroke I would check out closely and it is the Evinrude E-Tec direct injection engines http://www.evinrude.com/docs/100/0_US.htm . Just remember a bird in the hand is better than 2 in the bush. Honda is a proven motor It would be nice to have 2 or 3 years of history out in front of the Evinrude. "Dan" wrote in message ... Anyone with experience with Honda's 4 stroke engines. In particular, I am interested in the 150 - 200 hp engines. Thanks! -----= Posted via Newsfeeds.Com, Uncensored Usenet News =----- http://www.newsfeeds.com - The #1 Newsgroup Service in the World! -----== Over 80,000 Newsgroups - 16 Different Servers! =----- |
#6
![]() |
|||
|
|||
![]()
Most of the crabbers in my area are going to Hondas. One who is a good
friend of mine loves his. The mullet cast net fisherman love them also because they are so quiet they don't spoke the schools of fish. Myself I own a 50 hp Mercury 4 stroke and I love it. I've had it a year now with no problem at all. I will never own another 2 stroke. I like the economy and the quiet operation. I slow troll a lot and the motor never loads up plus the quiet operation doesn't spook the fish as easily. changing the oil is no problem and you don't have to deal with the fumes a 2 stroke puts out. The only downside is the carbs will clog up if not run farely frequently due to the smaller jets. "JG" wrote in message ... Dan I have a 18 ft Lund with a 115 Honda. It is a year and a half old and for my fishing needs I think it is great motor. My old 17 ft. smokercraft had a Mariner 115 2 stroke. I gave up a little speed out of the hole and about 5 mph on the top end, but remember the Lund is a larger and heavier boat and the motor is also heavier. I gained an easier starting engine. It has started the first time from when I was fishing in the low 20's this spring to the hot days of July on the family vacation at the lake. the engine is VERY quite at idle or wide open. When trolling, I can get down to 2.0 MPH ( according to my GPS, fish finder says 1.5 MPH). I can pull my son up on his wakeboard with many horses to spare. It is better than my old 115 2 stole on gas. If I am doing a lot of trolling it is a lot better. If I am running wide open it is still better but not by as much. When I got the boat I had the choose between the Yamaha or the Honda 115. 4 stroke. The Honda was 100 lbs heavier but if I had to make the decision over again I would go Honda again. The Yamie is a nice engine but from my past experiences with the Honda it should out last any other brand. As far as oil change.......tilt the motor up place a cut off plastic milk container and place it under the filter and remove and allow to drain. When draining the oil have a drain pan handy and there should be no mess. Now.......after saying all this there is one 2 stroke I would check out closely and it is the Evinrude E-Tec direct injection engines http://www.evinrude.com/docs/100/0_US.htm . Just remember a bird in the hand is better than 2 in the bush. Honda is a proven motor It would be nice to have 2 or 3 years of history out in front of the Evinrude. "Dan" wrote in message ... Anyone with experience with Honda's 4 stroke engines. In particular, I am interested in the 150 - 200 hp engines. Thanks! -----= Posted via Newsfeeds.Com, Uncensored Usenet News =----- http://www.newsfeeds.com - The #1 Newsgroup Service in the World! -----== Over 80,000 Newsgroups - 16 Different Servers! =----- |
#7
![]() |
|||
|
|||
![]()
I have a Honda four stroke, granted it's only a 10hp for trolling, but I
have had it since 1987 with NO PROBLEMS. It runs like a clock, is very quiet, and uses 1.5 gallons of fuel per day of trolling all day with downriggers dragging 100 ft. of cable. If you troll, four stroke is the way to go, no fouled plugs, no shake and vibration. My honda has been outstanding. I don't know about the new larger hp. models. Tom. |
#8
![]() |
|||
|
|||
![]()
We have a Honda 130 on our 18 foot boat. Have had the motor 3 years and I
have had no problems with it so far but I only use the boat infrequently(sigh) . A marina I often use has all their rental boats equipped with Hondas (90's I think) and they say they have been the most trouble-free engine they have used to date. By the way last year Honda issued a recall on my engine account fuel/water separator issues. The shop was really impressed with the recall kit Honda provided as it was about $1500 (Can) worth of new parts including not only a new separator but complete new fuel rail with injectors and all. By the way when I initially bought the engine we installed an external fuel/water separator just because I always thought that good practice, so we never had any problems. The engine is very quiet at idle and is less noisy than most at cruise and above, "Dan" wrote in message ... Anyone with experience with Honda's 4 stroke engines. In particular, I am interested in the 150 - 200 hp engines. Thanks! |
#9
![]() |
|||
|
|||
![]()
I have the Suzuki 4 stroke, very happy with everything.
you are gonna love em. at least 50% less gas, and no adding of oil. Right now they have a 6 year warranty. Dan wrote in message ... Anyone with experience with Honda's 4 stroke engines. In particular, I am interested in the 150 - 200 hp engines. Thanks! |
#10
![]() |
|||
|
|||
![]()
Only with the smaller Hondas...
1983 7.5hp pushing a Catalina 25 used a lot..in 10 years only had to replace the impeller once, plugs once, oil a couple times. Rarely had to fill up the 6 gallon tank,quiet and no smoky smell. 1998 15hp pushing a 14 Jonboat..pushing it very fast too..plenty of power, torque and great fuel mileage,quiet also.. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Tuning the engines | General | |||
Evinrude 5hp 4 stroke outboard | General | |||
Yamaha 200 hp 4 stroke | General |