| Page 1 of 2 | 1 | 2 |
|
|
Another Gorgeous Bay Day!
Left Deale at 6:30, headed for #83 with OldFart and Gimp aboard. Added a couple
more rod holders to the rails, and OldFart was kind enough to bring along a couple rods and a bag full of lures. The six rod spread seemed to work, no big tangles (couple little ones though). Tried a new lure brought along by OldFart, can't tell you what it is, 'cause it's secret. Maybe the Old Fart will read this and be nice, but not me. Anyway, we caught a 30"er about 15 minutes after dropping the lines in, and then things slowed way down. However, around 11:30 the buggers started biting again, and within another hour we landed three more stripers from about 20" to 25". Left the water at 1:30, after a spectacular day. Good weather, good company, and good fishing - for what more could one ask!! John H On the 'Poco Loco' out of Deale, MD on the beautiful Chesapeake Bay! |
Another Gorgeous Bay Day!
John H wrote in message . ..
Left Deale at 6:30, headed for #83 with OldFart and Gimp aboard. Added a couple more rod holders to the rails, and OldFart was kind enough to bring along a couple rods and a bag full of lures. The six rod spread seemed to work, no big tangles (couple little ones though). Tried a new lure brought along by OldFart, can't tell you what it is, 'cause it's secret. Maybe the Old Fart will read this and be nice, but not me. Anyway, we caught a 30"er about 15 minutes after dropping the lines in, and then things slowed way down. However, around 11:30 the buggers started biting again, and within another hour we landed three more stripers from about 20" to 25". Left the water at 1:30, after a spectacular day. Good weather, good company, and good fishing - for what more could one ask!! John H Take any pictures of "children in the biblical sense" with you? Was any of them your students? |
Another Gorgeous Bay Day!
basskisser wrote: Take any pictures of "children in the biblical sense" with you? Was any of them your students? Your understanding and subsequent conclusion of something John H wrote is a fine example of why you are a stupid idiot and is why people keep reminding you of the *fact* that you are an idiot. Not only is your conclusion wrong, you flaunt your stupidity by endlessly repeating the fiction. The repetition of this fiction also shows the moral bankruptcy of your character. The only people who take *anything* you say seriously are either idiots themselves, or are those who, because they agree with your political ideology, lack the courage to confront you and are therefore compelled to humor your stupidity. -- Charlie |
Another Gorgeous Bay Day!
Charles wrote in message ...
basskisser wrote: Take any pictures of "children in the biblical sense" with you? Was any of them your students? Your understanding and subsequent conclusion of something John H wrote is a fine example of why you are a stupid idiot and is why people keep reminding you of the *fact* that you are an idiot. Not only is your conclusion wrong, you flaunt your stupidity by endlessly repeating the fiction. The repetition of this fiction also shows the moral bankruptcy of your character. The only people who take *anything* you say seriously are either idiots themselves, or are those who, because they agree with your political ideology, lack the courage to confront you and are therefore compelled to humor your stupidity. -- Charlie Typical. That shows just what you THINK you know, is pure drivel. Every day, a lot of people take what I say very seriously. Yesterday, I did the structural design for roof components for a 940,000 square foot distribution center. It is a design build project, and the roof framing and details package I sent out will be used for pricing. Do you think that those people take me seriously? Now, about John. He specifically stated that he HOPED to see pictures of "children in the biblical sense". Did he not? He knows what he did. That is why he tried to retaliate with stupid childish crap from the internet. If he didn't do anything, he surely wouldn't have stooped THAT low. |
Another Gorgeous Bay Day!
basskisser wrote: Charles wrote in message ... basskisser wrote: Take any pictures of "children in the biblical sense" with you? Was any of them your students? Your understanding and subsequent conclusion of something John H wrote is a fine example of why you are a stupid idiot and is why people keep reminding you of the *fact* that you are an idiot. Not only is your conclusion wrong, you flaunt your stupidity by endlessly repeating the fiction. The repetition of this fiction also shows the moral bankruptcy of your character. The only people who take *anything* you say seriously are either idiots themselves, or are those who, because they agree with your political ideology, lack the courage to confront you and are therefore compelled to humor your stupidity. -- Charlie Typical. That shows just what you THINK you know, is pure drivel. Every day, a lot of people take what I say very seriously. No they don't. They are just humoring you. Yesterday, I did the structural design for roof components for a 940,000 square foot distribution center. It is a design build project, and the roof framing and details package I sent out will be used for pricing. Do you think that those people take me seriously? No. You're probably an apprentice/intern at best, and your designs are reviewed, corrected, and revised by experienced professionals. They surely have no clue that you make specious charges against others on usenet of viewing child pornography. Now, about John. He specifically stated that he HOPED to see pictures of "children in the biblical sense". Did he not? No. You're an idiot, and a stupid one at that. You have arrived at an illogical conclusion which, in your mind which is fraught with random synapses, is a logical conclusion. -- Charlie |
Another Gorgeous Bay Day!
"Charles" wrote in message ... basskisser wrote: Charles wrote in message ... basskisser wrote: Take any pictures of "children in the biblical sense" with you? Was any of them your students? Your understanding and subsequent conclusion of something John H wrote is a fine example of why you are a stupid idiot and is why people keep reminding you of the *fact* that you are an idiot. Not only is your conclusion wrong, you flaunt your stupidity by endlessly repeating the fiction. The repetition of this fiction also shows the moral bankruptcy of your character. The only people who take *anything* you say seriously are either idiots themselves, or are those who, because they agree with your political ideology, lack the courage to confront you and are therefore compelled to humor your stupidity. -- Charlie Typical. That shows just what you THINK you know, is pure drivel. Every day, a lot of people take what I say very seriously. No they don't. They are just humoring you. Yesterday, I did the structural design for roof components for a 940,000 square foot distribution center. It is a design build project, and the roof framing and details package I sent out will be used for pricing. Do you think that those people take me seriously? No. You're probably an apprentice/intern at best, and your designs are reviewed, corrected, and revised by experienced professionals. They surely have no clue that you make specious charges against others on usenet of viewing child pornography. Cripes, his boosting about designing 'roof components' as if he is important is like someone 'designing' a hubcap for a car. The fabricators end up doing most of the engineering work anyway. A 940,000 s.f. warehouse.....big whoop..........basic repetitive work that is done by the peons is most firms. Design/build = industry whores......is it any wonder that someone like asslicker is in their employ? Now, about John. He specifically stated that he HOPED to see pictures of "children in the biblical sense". Did he not? No. You're an idiot, and a stupid one at that. You have arrived at an illogical conclusion which, in your mind which is fraught with random synapses, is a logical conclusion. -- Charlie |
Another Gorgeous Bay Day!
"P.Fritz" wrote in message
Typical. That shows just what you THINK you know, is pure drivel. Every day, a lot of people take what I say very seriously. No they don't. They are just humoring you. Yesterday, I did the structural design for roof components for a 940,000 square foot distribution center. It is a design build project, and the roof framing and details package I sent out will be used for pricing. Do you think that those people take me seriously? No. Hmm, that's odd. Wonder why they pay me well for my services, and I'm NEVER without work? Cripes, his boosting about designing 'roof components' as if he is important is like someone 'designing' a hubcap for a car. The fabricators end up doing most of the engineering work anyway. A 940,000 s.f. warehouse.....big whoop..........basic repetitive work that is done by the peons is most firms. Design/build = industry whores......is it any wonder that someone like asslicker is in their employ? You're pretty stupid, aren't you? Let's see, yesterday's example. 940k sq. ft., 400' of 30 ton crane, cols, footings, crane beam, crane rail. Same for 500' of 50 ton crane. Repetitive peon work? You obviously don't know crap about it. Dynamic crane loads, starting with the deck weld, down to the embedment length of the crane col. anchor bolts. It's funny, usually people like steel detailers, and other REAL peons in the industry, don't even begin to understand what an engineer does!!! I'm sorry that you know so little about the subject, but alas, I'm not here to teach fools. |
Another Gorgeous Bay Day!
|
Another Gorgeous Bay Day!
"basskisser" wrote in message m... Oh, John...quit...you DID SPECIFICALLY ask for pictures, correct? You asked, in DIRECT response to another asshole saying that I knew children "in the biblical sense", did you not? Please, yes or no to those two questions are all that are needed. Now, do you think that the school board that you babysit at would approve of that? Yes or no? Bass, if you sent that thread to any school and/or school board they would understand exactly what John was saying. They would laugh at you the same as everyone who works with you laughs at you. They would say, BassK, you need to learn how to read and comprehend. Tell us about whiskey and Gore-Tex thread and your inability to comprehend. |
Another Gorgeous Bay Day!
"John Smith" wrote in message news:TYGvc.12195$sI.3649@attbi_s52...
"basskisser" wrote in message m... Oh, John...quit...you DID SPECIFICALLY ask for pictures, correct? You asked, in DIRECT response to another asshole saying that I knew children "in the biblical sense", did you not? Please, yes or no to those two questions are all that are needed. Now, do you think that the school board that you babysit at would approve of that? Yes or no? Bass, if you sent that thread to any school and/or school board they would understand exactly what John was saying. They would laugh at you the same as everyone who works with you laughs at you. They would say, BassK, you need to learn how to read and comprehend. Really? Let's give it a try! Talk to your Siamese Twin John H, and find out where to send the information to, and we'll see!! Tell us about whiskey and Gore-Tex thread and your inability to comprehend. Easy, go here, simpleton http://www.gore-tex.com You'll see there is NO Gore-Tex thread. Now, if you believe there is, show me some. |
Another Gorgeous Bay Day!
"basskisser" wrote in message Easy, go here, simpleton http://www.gore-tex.com You'll see there is NO Gore-Tex thread. Now, if you believe there is, show me some. I don't know why you can't find the info yourself, but let me help you. Here is a link showing the benefits of Gore-Tex sewing thread on a boat cover or awning. from: http://www.americana.com/fabricawnings/goretex.htm "We know that GORE-TEX® sewing thread never fails due to exposure to the environment. We back up that claim with a full lifetime warranty. If the seams on your boat cover or awning fail before the end of the usual life of the fabric, we'll pay for the repair work." Bass, do you ever get tired of being wrong? |
Another Gorgeous Bay Day!
"John Smith" wrote in message news:VLJvc.6569$uY.186@attbi_s53...
"basskisser" wrote in message Easy, go here, simpleton http://www.gore-tex.com You'll see there is NO Gore-Tex thread. Now, if you believe there is, show me some. I don't know why you can't find the info yourself, but let me help you. Here is a link showing the benefits of Gore-Tex sewing thread on a boat cover or awning. from: http://www.americana.com/fabricawnings/goretex.htm "We know that GORE-TEX® sewing thread never fails due to exposure to the environment. We back up that claim with a full lifetime warranty. If the seams on your boat cover or awning fail before the end of the usual life of the fabric, we'll pay for the repair work." Bass, do you ever get tired of being wrong? What boats are those awning on, anyway? |
Another Gorgeous Bay Day!
"basskisser" wrote in message m... "John Smith" wrote in message news:VLJvc.6569$uY.186@attbi_s53... "basskisser" wrote in message Easy, go here, simpleton http://www.gore-tex.com You'll see there is NO Gore-Tex thread. Now, if you believe there is, show me some. I don't know why you can't find the info yourself, but let me help you. Here is a link showing the benefits of Gore-Tex sewing thread on a boat cover or awning. from: http://www.americana.com/fabricawnings/goretex.htm "We know that GORE-TEX® sewing thread never fails due to exposure to the environment. We back up that claim with a full lifetime warranty. If the seams on your boat cover or awning fail before the end of the usual life of the fabric, we'll pay for the repair work." Bass, do you ever get tired of being wrong? What boats are those awning on, anyway? A big houseboat has awnings. And the Gore-tex people make all kinds of products. Threads, gaskets, seals, besides the coatings for material. |
Another Gorgeous Bay Day!
Awnings are also part of most cruisers and yachts.
"Calif Bill" wrote in message ink.net... "basskisser" wrote in message m... "John Smith" wrote in message news:VLJvc.6569$uY.186@attbi_s53... "basskisser" wrote in message Easy, go here, simpleton http://www.gore-tex.com You'll see there is NO Gore-Tex thread. Now, if you believe there is, show me some. I don't know why you can't find the info yourself, but let me help you. Here is a link showing the benefits of Gore-Tex sewing thread on a boat cover or awning. from: http://www.americana.com/fabricawnings/goretex.htm "We know that GORE-TEX® sewing thread never fails due to exposure to the environment. We back up that claim with a full lifetime warranty. If the seams on your boat cover or awning fail before the end of the usual life of the fabric, we'll pay for the repair work." Bass, do you ever get tired of being wrong? What boats are those awning on, anyway? A big houseboat has awnings. And the Gore-tex people make all kinds of products. Threads, gaskets, seals, besides the coatings for material. |
Another Gorgeous Bay Day!
"Calif Bill" wrote in message link.net...
"basskisser" wrote in message m... "John Smith" wrote in message news:VLJvc.6569$uY.186@attbi_s53... "basskisser" wrote in message Easy, go here, simpleton http://www.gore-tex.com You'll see there is NO Gore-Tex thread. Now, if you believe there is, show me some. I don't know why you can't find the info yourself, but let me help you. Here is a link showing the benefits of Gore-Tex sewing thread on a boat cover or awning. from: http://www.americana.com/fabricawnings/goretex.htm "We know that GORE-TEX® sewing thread never fails due to exposure to the environment. We back up that claim with a full lifetime warranty. If the seams on your boat cover or awning fail before the end of the usual life of the fabric, we'll pay for the repair work." Bass, do you ever get tired of being wrong? What boats are those awning on, anyway? A big houseboat has awnings. And the Gore-tex people make all kinds of products. Threads, gaskets, seals, besides the coatings for material. I want, and have been asking to see, from Gore-Tex's OWN WEBSITE, a reference to "Gore-Tex thread". Have any? |
Another Gorgeous Bay Day!
"John Smith" wrote in message news:VLJvc.6569$uY.186@attbi_s53...
"basskisser" wrote in message Easy, go here, simpleton http://www.gore-tex.com You'll see there is NO Gore-Tex thread. Now, if you believe there is, show me some. I don't know why you can't find the info yourself, but let me help you. Here is a link showing the benefits of Gore-Tex sewing thread on a boat cover or awning. from: http://www.americana.com/fabricawnings/goretex.htm "We know that GORE-TEX® sewing thread never fails due to exposure to the environment. We back up that claim with a full lifetime warranty. If the seams on your boat cover or awning fail before the end of the usual life of the fabric, we'll pay for the repair work." Bass, do you ever get tired of being wrong? You are wrong. I want to see from GORE-TEX'S OWN WEBSITE a reference to "Gore-Tex thread". Now, I understand that a lot of people use the words Gore-Tex generically. I care not about that. NOYB SPECIFICALLY stated "Gore-Tex thread". The website for Gore-Tex Inc. states no such thing. |
Another Gorgeous Bay Day!
"John Smith" wrote in message news:TYGvc.12195$sI.3649@attbi_s52...
"basskisser" wrote in message m... Oh, John...quit...you DID SPECIFICALLY ask for pictures, correct? You asked, in DIRECT response to another asshole saying that I knew children "in the biblical sense", did you not? Please, yes or no to those two questions are all that are needed. Now, do you think that the school board that you babysit at would approve of that? Yes or no? Bass, if you sent that thread to any school and/or school board they would understand exactly what John was saying. They would laugh at you the same as everyone who works with you laughs at you. They would say, BassK, you need to learn how to read and comprehend. Really? So, let me get this straight. If you told someone about a new boat you had, and they said "I hope you have pictures to post", would you think that they DIDN'T want pictures posted, or DID want pictures posted? Simple answer is all that is required. |
Another Gorgeous Bay Day!
On 7 Jun 2004 07:01:58 -0700, (basskisser) wrote:
"John Smith" wrote in message news:VLJvc.6569$uY.186@attbi_s53... "basskisser" wrote in message Easy, go here, simpleton http://www.gore-tex.com You'll see there is NO Gore-Tex thread. Now, if you believe there is, show me some. I don't know why you can't find the info yourself, but let me help you. Here is a link showing the benefits of Gore-Tex sewing thread on a boat cover or awning. from: http://www.americana.com/fabricawnings/goretex.htm "We know that GORE-TEX® sewing thread never fails due to exposure to the environment. We back up that claim with a full lifetime warranty. If the seams on your boat cover or awning fail before the end of the usual life of the fabric, we'll pay for the repair work." Bass, do you ever get tired of being wrong? You are wrong. I want to see from GORE-TEX'S OWN WEBSITE a reference to "Gore-Tex thread". Now, I understand that a lot of people use the words Gore-Tex generically. I care not about that. NOYB SPECIFICALLY stated "Gore-Tex thread". The website for Gore-Tex Inc. states no such thing. I gave that to you. Only they call it Gore-Tex Suture. Now, if you want to argue the suture means something different than thread, go right ahead. But you'll lose that also since in this case, the suture *is* thread used to surgically close wounds or join tissues. Steve |
Another Gorgeous Bay Day!
On Tue, 08 Jun 2004 01:05:46 GMT, (Steven Shelikoff) wrote:
On 7 Jun 2004 07:01:58 -0700, (basskisser) wrote: "John Smith" wrote in message news:VLJvc.6569$uY.186@attbi_s53... "basskisser" wrote in message Easy, go here, simpleton http://www.gore-tex.com You'll see there is NO Gore-Tex thread. Now, if you believe there is, show me some. I don't know why you can't find the info yourself, but let me help you. Here is a link showing the benefits of Gore-Tex sewing thread on a boat cover or awning. from: http://www.americana.com/fabricawnings/goretex.htm "We know that GORE-TEX® sewing thread never fails due to exposure to the environment. We back up that claim with a full lifetime warranty. If the seams on your boat cover or awning fail before the end of the usual life of the fabric, we'll pay for the repair work." Bass, do you ever get tired of being wrong? You are wrong. I want to see from GORE-TEX'S OWN WEBSITE a reference to "Gore-Tex thread". Now, I understand that a lot of people use the words Gore-Tex generically. I care not about that. NOYB SPECIFICALLY stated "Gore-Tex thread". The website for Gore-Tex Inc. states no such thing. I gave that to you. Only they call it Gore-Tex Suture. Now, if you want to argue the suture means something different than thread, go right ahead. But you'll lose that also since in this case, the suture *is* thread used to surgically close wounds or join tissues. Steve You probably won't hear much from him on this topic anymore. He sounded pretty embarrassed and disheveled with his last post. John H On the 'Poco Loco' out of Deale, MD on the beautiful Chesapeake Bay! |
Another Gorgeous Bay Day!
John H wrote in message . ..
On Tue, 08 Jun 2004 01:05:46 GMT, (Steven Shelikoff) wrote: On 7 Jun 2004 07:01:58 -0700, (basskisser) wrote: "John Smith" wrote in message news:VLJvc.6569$uY.186@attbi_s53... "basskisser" wrote in message Easy, go here, simpleton http://www.gore-tex.com You'll see there is NO Gore-Tex thread. Now, if you believe there is, show me some. I don't know why you can't find the info yourself, but let me help you. Here is a link showing the benefits of Gore-Tex sewing thread on a boat cover or awning. from: http://www.americana.com/fabricawnings/goretex.htm "We know that GORE-TEX® sewing thread never fails due to exposure to the environment. We back up that claim with a full lifetime warranty. If the seams on your boat cover or awning fail before the end of the usual life of the fabric, we'll pay for the repair work." Bass, do you ever get tired of being wrong? You are wrong. I want to see from GORE-TEX'S OWN WEBSITE a reference to "Gore-Tex thread". Now, I understand that a lot of people use the words Gore-Tex generically. I care not about that. NOYB SPECIFICALLY stated "Gore-Tex thread". The website for Gore-Tex Inc. states no such thing. I gave that to you. Only they call it Gore-Tex Suture. Now, if you want to argue the suture means something different than thread, go right ahead. But you'll lose that also since in this case, the suture *is* thread used to surgically close wounds or join tissues. Steve You probably won't hear much from him on this topic anymore. He sounded pretty embarrassed and disheveled with his last post. John H Please show me anywhere on Gore-tex's website where they say ANYTHING about "Gore-Tex thread", okay, child pornographer? |
Another Gorgeous Bay Day!
(Steven Shelikoff) wrote in message ...
On 7 Jun 2004 07:01:58 -0700, (basskisser) wrote: "John Smith" wrote in message news:VLJvc.6569$uY.186@attbi_s53... "basskisser" wrote in message Easy, go here, simpleton http://www.gore-tex.com You'll see there is NO Gore-Tex thread. Now, if you believe there is, show me some. I don't know why you can't find the info yourself, but let me help you. Here is a link showing the benefits of Gore-Tex sewing thread on a boat cover or awning. from: http://www.americana.com/fabricawnings/goretex.htm "We know that GORE-TEX® sewing thread never fails due to exposure to the environment. We back up that claim with a full lifetime warranty. If the seams on your boat cover or awning fail before the end of the usual life of the fabric, we'll pay for the repair work." Bass, do you ever get tired of being wrong? You are wrong. I want to see from GORE-TEX'S OWN WEBSITE a reference to "Gore-Tex thread". Now, I understand that a lot of people use the words Gore-Tex generically. I care not about that. NOYB SPECIFICALLY stated "Gore-Tex thread". The website for Gore-Tex Inc. states no such thing. I gave that to you. Only they call it Gore-Tex Suture. Now, if you want to argue the suture means something different than thread, go right ahead. But you'll lose that also since in this case, the suture *is* thread used to surgically close wounds or join tissues. Steve Please show where, on Gore-Tex's website, they say anything about "Gore-Tex thread". You are losing track of the post. NOYB stated that some boat manuf. use "Gore-Tex thread" for stitching seat cushions, etc. Now, do you REALLY think that he meant Gore-Tex sutures???? |
Another Gorgeous Bay Day!
On 9 Jun 2004 05:01:39 -0700, (basskisser) wrote:
(Steven Shelikoff) wrote in message ... On 7 Jun 2004 07:01:58 -0700, (basskisser) wrote: "John Smith" wrote in message news:VLJvc.6569$uY.186@attbi_s53... "basskisser" wrote in message Easy, go here, simpleton http://www.gore-tex.com You'll see there is NO Gore-Tex thread. Now, if you believe there is, show me some. I don't know why you can't find the info yourself, but let me help you. Here is a link showing the benefits of Gore-Tex sewing thread on a boat cover or awning. from: http://www.americana.com/fabricawnings/goretex.htm "We know that GORE-TEX® sewing thread never fails due to exposure to the environment. We back up that claim with a full lifetime warranty. If the seams on your boat cover or awning fail before the end of the usual life of the fabric, we'll pay for the repair work." Bass, do you ever get tired of being wrong? You are wrong. I want to see from GORE-TEX'S OWN WEBSITE a reference to "Gore-Tex thread". Now, I understand that a lot of people use the words Gore-Tex generically. I care not about that. NOYB SPECIFICALLY stated "Gore-Tex thread". The website for Gore-Tex Inc. states no such thing. I gave that to you. Only they call it Gore-Tex Suture. Now, if you want to argue the suture means something different than thread, go right ahead. But you'll lose that also since in this case, the suture *is* thread used to surgically close wounds or join tissues. Please show where, on Gore-Tex's website, they say anything about "Gore-Tex thread". You are losing track of the post. NOYB stated that some boat manuf. use "Gore-Tex thread" for stitching seat cushions, etc. Now, do you REALLY think that he meant Gore-Tex sutures???? http://www.goremedical.com/English/P...ture/Index.htm And yes, Gore-Tex Suture is thread. Many people use the term interchangably and there's nothing wrong with that. Even Gore-Tex uses the term interchangably on their own website when they mention the "needle-to-thread diameter ratio" when talking about their suture. If they wished to differentiate their produce from thread in any way, they would have said "needle-to-suture diameter ratio." But they didn't, they specifically called their Gore-Tex product both "thread" and "suture" in the same paragraph. Steve P.S., it doesn't really matter what NYOB meant. The fact is that you are wrong ... Gore-Tex does make thread and, as you requested, it's shown on their website. |
Another Gorgeous Bay Day!
"basskisser" wrote in message om... (Steven Shelikoff) wrote in message ... On 7 Jun 2004 07:01:58 -0700, (basskisser) wrote: "John Smith" wrote in message news:VLJvc.6569$uY.186@attbi_s53... "basskisser" wrote in message Easy, go here, simpleton http://www.gore-tex.com You'll see there is NO Gore-Tex thread. Now, if you believe there is, show me some. I don't know why you can't find the info yourself, but let me help you. Here is a link showing the benefits of Gore-Tex sewing thread on a boat cover or awning. from: http://www.americana.com/fabricawnings/goretex.htm "We know that GORE-TEX® sewing thread never fails due to exposure to the environment. We back up that claim with a full lifetime warranty. If the seams on your boat cover or awning fail before the end of the usual life of the fabric, we'll pay for the repair work." Bass, do you ever get tired of being wrong? You are wrong. I want to see from GORE-TEX'S OWN WEBSITE a reference to "Gore-Tex thread". Now, I understand that a lot of people use the words Gore-Tex generically. I care not about that. NOYB SPECIFICALLY stated "Gore-Tex thread". The website for Gore-Tex Inc. states no such thing. I gave that to you. Only they call it Gore-Tex Suture. Now, if you want to argue the suture means something different than thread, go right ahead. But you'll lose that also since in this case, the suture *is* thread used to surgically close wounds or join tissues. Steve Please show where, on Gore-Tex's website, they say anything about "Gore-Tex thread". You are losing track of the post. NOYB stated that some boat manuf. use "Gore-Tex thread" for stitching seat cushions, etc. Now, do you REALLY think that he meant Gore-Tex sutures???? Are you that stupid!?!? W.L. Gore and Associates introduced Gore-Tex thread in the mid 80's. At that time, they apparently called it Gore-Tex thread. They've since changed the name to "Tenara"...so you will not find it listed as "Gore-Tex thread" on their website. However, here are a number of links discussing "Gore-Tex thread", several of which mention a change in the name to Tenara: "At about the same time, GORE-TEX thread (now known as TENARA) was introduced in a strength compatible for the rigors of a marine enclosure " http://www.ez2cy.com/other_enclosures/e_printable.html "Offering the best in materials, 316 stainless steel tubing & hardware, UV impervious Tenara (formerly Gore Tex) thread" http://coastlinememories.com/gemini.canvas.ad.html " The seat cushions are made from heavy, comfortable 40-ounce vinyl, stitched with weatherproof Gore-Tex thread" http://www.boatingmag.com/article.as...article_id=152 "Doyle Caribbean was the first and is still the only manufacturer to exclusively use Gore-TexT thread for all new canvas and repairs - a thread that is guaranteed for life." http://www.doylesails.com/lofts-na-tortola.htm FINISHING SUPPLIES. a.. Acrylic Binding Tape, 3/4"& 1" b.. Vinyl Binding Tape, 3/4" c.. Cord & Ropes d.. Bobbins e.. Double Sided Seaming Tape f.. VELCRO/ Hook and Loop g.. 3M Spray Adhesives h.. Thread: Anti-Wick and UVR i.. GORE-TEX Thread http://www.mobilecanvas.com/bainbridge.html "Has anyone been using Gore-tex thread in textile conservation? If so, for what purposes?" http://palimpsest.stanford.edu/byfor.../msg00000.html "5 year warranty on structural seams sewn with Gore-Tex thread" and "Seams are tough enough to last a lifetime sewn with Tenara thread by Gore-Tex" http://216.239.39.104/search?q=cache...hread%22&hl=en "Structural seams are sewn with Gore-Tex thread, which has a lifetime warranty." http://www.davebang.com/shelter.htm There are at least 72 instances on google where you can find "Gore-Tex thread"...and most of them deal with its use in marine applications. |
Another Gorgeous Bay Day!
I think this thread would qualify as proof that Basskisser has FAS.
"basskisser" wrote in message om... (Steven Shelikoff) wrote in message ... On 7 Jun 2004 07:01:58 -0700, (basskisser) wrote: "John Smith" wrote in message news:VLJvc.6569$uY.186@attbi_s53... "basskisser" wrote in message Easy, go here, simpleton http://www.gore-tex.com You'll see there is NO Gore-Tex thread. Now, if you believe there is, show me some. I don't know why you can't find the info yourself, but let me help you. Here is a link showing the benefits of Gore-Tex sewing thread on a boat cover or awning. from: http://www.americana.com/fabricawnings/goretex.htm "We know that GORE-TEX® sewing thread never fails due to exposure to the environment. We back up that claim with a full lifetime warranty. If the seams on your boat cover or awning fail before the end of the usual life of the fabric, we'll pay for the repair work." Bass, do you ever get tired of being wrong? You are wrong. I want to see from GORE-TEX'S OWN WEBSITE a reference to "Gore-Tex thread". Now, I understand that a lot of people use the words Gore-Tex generically. I care not about that. NOYB SPECIFICALLY stated "Gore-Tex thread". The website for Gore-Tex Inc. states no such thing. I gave that to you. Only they call it Gore-Tex Suture. Now, if you want to argue the suture means something different than thread, go right ahead. But you'll lose that also since in this case, the suture *is* thread used to surgically close wounds or join tissues. Steve Please show where, on Gore-Tex's website, they say anything about "Gore-Tex thread". You are losing track of the post. NOYB stated that some boat manuf. use "Gore-Tex thread" for stitching seat cushions, etc. Now, do you REALLY think that he meant Gore-Tex sutures???? |
Another Gorgeous Bay Day!
"Steven Shelikoff" wrote in message ... On 9 Jun 2004 05:01:39 -0700, (basskisser) wrote: (Steven Shelikoff) wrote in message ... On 7 Jun 2004 07:01:58 -0700, (basskisser) wrote: "John Smith" wrote in message news:VLJvc.6569$uY.186@attbi_s53... "basskisser" wrote in message Easy, go here, simpleton http://www.gore-tex.com You'll see there is NO Gore-Tex thread. Now, if you believe there is, show me some. I don't know why you can't find the info yourself, but let me help you. Here is a link showing the benefits of Gore-Tex sewing thread on a boat cover or awning. from: http://www.americana.com/fabricawnings/goretex.htm "We know that GORE-TEX® sewing thread never fails due to exposure to the environment. We back up that claim with a full lifetime warranty. If the seams on your boat cover or awning fail before the end of the usual life of the fabric, we'll pay for the repair work." Bass, do you ever get tired of being wrong? You are wrong. I want to see from GORE-TEX'S OWN WEBSITE a reference to "Gore-Tex thread". Now, I understand that a lot of people use the words Gore-Tex generically. I care not about that. NOYB SPECIFICALLY stated "Gore-Tex thread". The website for Gore-Tex Inc. states no such thing. I gave that to you. Only they call it Gore-Tex Suture. Now, if you want to argue the suture means something different than thread, go right ahead. But you'll lose that also since in this case, the suture *is* thread used to surgically close wounds or join tissues. Please show where, on Gore-Tex's website, they say anything about "Gore-Tex thread". You are losing track of the post. NOYB stated that some boat manuf. use "Gore-Tex thread" for stitching seat cushions, etc. Now, do you REALLY think that he meant Gore-Tex sutures???? http://www.goremedical.com/English/P...ture/Index.htm And yes, Gore-Tex Suture is thread. Many people use the term interchangably and there's nothing wrong with that. Even Gore-Tex uses the term interchangably on their own website when they mention the "needle-to-thread diameter ratio" when talking about their suture. If they wished to differentiate their produce from thread in any way, they would have said "needle-to-suture diameter ratio." But they didn't, they specifically called their Gore-Tex product both "thread" and "suture" in the same paragraph. Steve P.S., it doesn't really matter what NYOB meant. The fact is that you are wrong ... Gore-Tex does make thread and, as you requested, it's shown on their website. Here's what likely happened, Steve: When Gore-Tex introduced its medical thread/suture, there was confusion with the "Gore-Tex thread" that was used for marine applications. Gore-Tex apparently changed name of the marine-grade "Gore-Tex thread" to "Tenara" to differentiate between the two products. When I said "Gore-tex" thread, I was speaking in terms of the product that Chaparral uses to stitch the fabric of its seat cushions. I vaguely remembered reading an article back in 2001 that explained how some manufacturers employ better materials (such as Gore-Tex thread) on every item on the boat...thus making them "better" boats. I was not aware that Gore-tex changed the name of the thread to "Tenara"...and it seems that the author of the October, 2001 article, and the editor of Boating magazine were not aware either. Here's the link: http://www.boatingmag.com/article.as...article_id=152 |
Another Gorgeous Bay Day!
On Wed, 09 Jun 2004 16:40:35 GMT, "NOYB" wrote:
"Steven Shelikoff" wrote in message ... On 9 Jun 2004 05:01:39 -0700, (basskisser) wrote: (Steven Shelikoff) wrote in message ... On 7 Jun 2004 07:01:58 -0700, (basskisser) wrote: "John Smith" wrote in message news:VLJvc.6569$uY.186@attbi_s53... "basskisser" wrote in message Easy, go here, simpleton http://www.gore-tex.com You'll see there is NO Gore-Tex thread. Now, if you believe there is, show me some. I don't know why you can't find the info yourself, but let me help you. Here is a link showing the benefits of Gore-Tex sewing thread on a boat cover or awning. from: http://www.americana.com/fabricawnings/goretex.htm "We know that GORE-TEX® sewing thread never fails due to exposure to the environment. We back up that claim with a full lifetime warranty. If the seams on your boat cover or awning fail before the end of the usual life of the fabric, we'll pay for the repair work." Bass, do you ever get tired of being wrong? You are wrong. I want to see from GORE-TEX'S OWN WEBSITE a reference to "Gore-Tex thread". Now, I understand that a lot of people use the words Gore-Tex generically. I care not about that. NOYB SPECIFICALLY stated "Gore-Tex thread". The website for Gore-Tex Inc. states no such thing. I gave that to you. Only they call it Gore-Tex Suture. Now, if you want to argue the suture means something different than thread, go right ahead. But you'll lose that also since in this case, the suture *is* thread used to surgically close wounds or join tissues. Please show where, on Gore-Tex's website, they say anything about "Gore-Tex thread". You are losing track of the post. NOYB stated that some boat manuf. use "Gore-Tex thread" for stitching seat cushions, etc. Now, do you REALLY think that he meant Gore-Tex sutures???? http://www.goremedical.com/English/P...ture/Index.htm And yes, Gore-Tex Suture is thread. Many people use the term interchangably and there's nothing wrong with that. Even Gore-Tex uses the term interchangably on their own website when they mention the "needle-to-thread diameter ratio" when talking about their suture. If they wished to differentiate their produce from thread in any way, they would have said "needle-to-suture diameter ratio." But they didn't, they specifically called their Gore-Tex product both "thread" and "suture" in the same paragraph. Steve P.S., it doesn't really matter what NYOB meant. The fact is that you are wrong ... Gore-Tex does make thread and, as you requested, it's shown on their website. Here's what likely happened, Steve: When Gore-Tex introduced its medical thread/suture, there was confusion with the "Gore-Tex thread" that was used for marine applications. Gore-Tex apparently changed name of the marine-grade "Gore-Tex thread" to "Tenara" to differentiate between the two products. When I said "Gore-tex" thread, I was speaking in terms of the product that Chaparral uses to stitch the fabric of its seat cushions. I vaguely remembered reading an article back in 2001 that explained how some manufacturers employ better materials (such as Gore-Tex thread) on every item on the boat...thus making them "better" boats. I was not aware that Gore-tex changed the name of the thread to "Tenara"...and it seems that the author of the October, 2001 article, and the editor of Boating magazine were not aware either. Here's the link: http://www.boatingmag.com/article.as...article_id=152 There is absolutely no reason to justify any claim you've made that b'asskisser is refuting. If he's refuting it, then it's most likely true. His debating abilities fall just below the 8th grade level. Of course, he'll probably ask for proof, but unless he can find a reputable source which verifies that he isn't a dip****, I'll stick with my opinion. John H On the 'Poco Loco' out of Deale, MD on the beautiful Chesapeake Bay! |
Another Gorgeous Bay Day!
"John Smith" wrote in message news:AaFxc.8181$0y.1673@attbi_s03...
I think this thread would qualify as proof that Basskisser has FAS. Perhaps something is wrong with you, I'll type it slowly, just for you.... Please show anywhere on Gore-Tex's website that mentions Gore-Tex thread. Can you? Yes or no. Now try to keep up here, this gets intense for your narrow mind. The original post about Gore-Tex thread was from NOYB, and about using it in boat cushions. Understand? Okay then, what to hell would make someone even as stupid as YOU think that there are companies using Gore-Tex Sutures to do that????? |
Another Gorgeous Bay Day!
"NOYB" wrote in message ink.net...
"basskisser" wrote in message om... (Steven Shelikoff) wrote in message ... On 7 Jun 2004 07:01:58 -0700, (basskisser) wrote: "John Smith" wrote in message news:VLJvc.6569$uY.186@attbi_s53... "basskisser" wrote in message Easy, go here, simpleton http://www.gore-tex.com You'll see there is NO Gore-Tex thread. Now, if you believe there is, show me some. I don't know why you can't find the info yourself, but let me help you. Here is a link showing the benefits of Gore-Tex sewing thread on a boat cover or awning. from: http://www.americana.com/fabricawnings/goretex.htm "We know that GORE-TEX® sewing thread never fails due to exposure to the environment. We back up that claim with a full lifetime warranty. If the seams on your boat cover or awning fail before the end of the usual life of the fabric, we'll pay for the repair work." Bass, do you ever get tired of being wrong? You are wrong. I want to see from GORE-TEX'S OWN WEBSITE a reference to "Gore-Tex thread". Now, I understand that a lot of people use the words Gore-Tex generically. I care not about that. NOYB SPECIFICALLY stated "Gore-Tex thread". The website for Gore-Tex Inc. states no such thing. I gave that to you. Only they call it Gore-Tex Suture. Now, if you want to argue the suture means something different than thread, go right ahead. But you'll lose that also since in this case, the suture *is* thread used to surgically close wounds or join tissues. Steve Please show where, on Gore-Tex's website, they say anything about "Gore-Tex thread". You are losing track of the post. NOYB stated that some boat manuf. use "Gore-Tex thread" for stitching seat cushions, etc. Now, do you REALLY think that he meant Gore-Tex sutures???? Are you that stupid!?!? W.L. Gore and Associates introduced Gore-Tex thread in the mid 80's. At that time, they apparently called it Gore-Tex thread. They've since changed the name to "Tenara"...so you will not find it listed as "Gore-Tex thread" on their website. However, here are a number of links discussing "Gore-Tex thread", several of which mention a change in the name to Tenara: "At about the same time, GORE-TEX thread (now known as TENARA) was introduced in a strength compatible for the rigors of a marine enclosure " http://www.ez2cy.com/other_enclosures/e_printable.html "Offering the best in materials, 316 stainless steel tubing & hardware, UV impervious Tenara (formerly Gore Tex) thread" http://coastlinememories.com/gemini.canvas.ad.html " The seat cushions are made from heavy, comfortable 40-ounce vinyl, stitched with weatherproof Gore-Tex thread" http://www.boatingmag.com/article.as...article_id=152 "Doyle Caribbean was the first and is still the only manufacturer to exclusively use Gore-TexT thread for all new canvas and repairs - a thread that is guaranteed for life." http://www.doylesails.com/lofts-na-tortola.htm FINISHING SUPPLIES. a.. Acrylic Binding Tape, 3/4"& 1" b.. Vinyl Binding Tape, 3/4" c.. Cord & Ropes d.. Bobbins e.. Double Sided Seaming Tape f.. VELCRO/ Hook and Loop g.. 3M Spray Adhesives h.. Thread: Anti-Wick and UVR i.. GORE-TEX Thread http://www.mobilecanvas.com/bainbridge.html "Has anyone been using Gore-tex thread in textile conservation? If so, for what purposes?" http://palimpsest.stanford.edu/byfor.../msg00000.html "5 year warranty on structural seams sewn with Gore-Tex thread" and "Seams are tough enough to last a lifetime sewn with Tenara thread by Gore-Tex" http://216.239.39.104/search?q=cache...hread%22&hl=en "Structural seams are sewn with Gore-Tex thread, which has a lifetime warranty." http://www.davebang.com/shelter.htm There are at least 72 instances on google where you can find "Gore-Tex thread"...and most of them deal with its use in marine applications. One more time for the class dolt. Please show anywhere on the Gore-Tex website where there is any mention of "Gore-Tex thread". Can you do that? Do you really suppose they use Gore-Tex Suture for boat cushions? |
Another Gorgeous Bay Day!
asskisser,
NOYB showed you numerous web sites referring to Gore-Tex thread. The fact you don't believe them shows that you are inflicted with a severe case of OCD probably aggravated by your FAS. Do you now want to meet up with some more people and beat them up because they know you are one sick puppy. "basskisser" wrote in message om... "John Smith" wrote in message news:AaFxc.8181$0y.1673@attbi_s03... I think this thread would qualify as proof that Basskisser has FAS. Perhaps something is wrong with you, I'll type it slowly, just for you.... Please show anywhere on Gore-Tex's website that mentions Gore-Tex thread. Can you? Yes or no. Now try to keep up here, this gets intense for your narrow mind. The original post about Gore-Tex thread was from NOYB, and about using it in boat cushions. Understand? Okay then, what to hell would make someone even as stupid as YOU think that there are companies using Gore-Tex Sutures to do that????? |
Another Gorgeous Bay Day!
On 9 Jun 2004 12:12:32 -0700, (basskisser) wrote:
One more time for the class dolt. Please show anywhere on the Gore-Tex website where there is any mention of "Gore-Tex thread". Can you do that? Do you really suppose they use Gore-Tex Suture for boat cushions? Yes, because it's the same material under a different name, one called thread for sewing of textiles and one called suture for medical use. Both threads are spun from yarn made of expanded polytetrafluoroethylene (ePTFE) Here is the official Gore products website describing Gore Thread: http://www.gore.com/creative/tenara.html and here is the official Gore products website describing Gore Sutu http://www.goremedical.com/English/P...ture/Index.htm Both of them are official Gore sites, both of them specifically describe their product as thread. What is it that you still do not understand? If you don't believe the websites, why don't you call Gore products on the phone and ask them if they make thread? Steve |
Another Gorgeous Bay Day!
"basskisser" wrote in message om... "NOYB" wrote in message ink.net... "basskisser" wrote in message om... (Steven Shelikoff) wrote in message ... On 7 Jun 2004 07:01:58 -0700, (basskisser) wrote: "John Smith" wrote in message news:VLJvc.6569$uY.186@attbi_s53... "basskisser" wrote in message Easy, go here, simpleton http://www.gore-tex.com You'll see there is NO Gore-Tex thread. Now, if you believe there is, show me some. I don't know why you can't find the info yourself, but let me help you. Here is a link showing the benefits of Gore-Tex sewing thread on a boat cover or awning. from: http://www.americana.com/fabricawnings/goretex.htm "We know that GORE-TEX® sewing thread never fails due to exposure to the environment. We back up that claim with a full lifetime warranty. If the seams on your boat cover or awning fail before the end of the usual life of the fabric, we'll pay for the repair work." Bass, do you ever get tired of being wrong? You are wrong. I want to see from GORE-TEX'S OWN WEBSITE a reference to "Gore-Tex thread". Now, I understand that a lot of people use the words Gore-Tex generically. I care not about that. NOYB SPECIFICALLY stated "Gore-Tex thread". The website for Gore-Tex Inc. states no such thing. I gave that to you. Only they call it Gore-Tex Suture. Now, if you want to argue the suture means something different than thread, go right ahead. But you'll lose that also since in this case, the suture *is* thread used to surgically close wounds or join tissues. Steve Please show where, on Gore-Tex's website, they say anything about "Gore-Tex thread". You are losing track of the post. NOYB stated that some boat manuf. use "Gore-Tex thread" for stitching seat cushions, etc. Now, do you REALLY think that he meant Gore-Tex sutures???? Are you that stupid!?!? W.L. Gore and Associates introduced Gore-Tex thread in the mid 80's. At that time, they apparently called it Gore-Tex thread. They've since changed the name to "Tenara"...so you will not find it listed as "Gore-Tex thread" on their website. However, here are a number of links discussing "Gore-Tex thread", several of which mention a change in the name to Tenara: "At about the same time, GORE-TEX thread (now known as TENARA) was introduced in a strength compatible for the rigors of a marine enclosure " http://www.ez2cy.com/other_enclosures/e_printable.html "Offering the best in materials, 316 stainless steel tubing & hardware, UV impervious Tenara (formerly Gore Tex) thread" http://coastlinememories.com/gemini.canvas.ad.html " The seat cushions are made from heavy, comfortable 40-ounce vinyl, stitched with weatherproof Gore-Tex thread" http://www.boatingmag.com/article.as...article_id=152 "Doyle Caribbean was the first and is still the only manufacturer to exclusively use Gore-TexT thread for all new canvas and repairs - a thread that is guaranteed for life." http://www.doylesails.com/lofts-na-tortola.htm FINISHING SUPPLIES. a.. Acrylic Binding Tape, 3/4"& 1" b.. Vinyl Binding Tape, 3/4" c.. Cord & Ropes d.. Bobbins e.. Double Sided Seaming Tape f.. VELCRO/ Hook and Loop g.. 3M Spray Adhesives h.. Thread: Anti-Wick and UVR i.. GORE-TEX Thread http://www.mobilecanvas.com/bainbridge.html "Has anyone been using Gore-tex thread in textile conservation? If so, for what purposes?" http://palimpsest.stanford.edu/byfor.../msg00000.html "5 year warranty on structural seams sewn with Gore-Tex thread" and "Seams are tough enough to last a lifetime sewn with Tenara thread by Gore-Tex" http://216.239.39.104/search?q=cache...hread%22&hl=en "Structural seams are sewn with Gore-Tex thread, which has a lifetime warranty." http://www.davebang.com/shelter.htm There are at least 72 instances on google where you can find "Gore-Tex thread"...and most of them deal with its use in marine applications. One more time for the class dolt. Please show anywhere on the Gore-Tex website where there is any mention of "Gore-Tex thread". One more time for the ****ing idiot hillbilly from Snellville: Gore-Tex changed the name of "Gore-Tex thread" to "Tenara" sometime in the late 80's or early 90's. That's why the name "Gore-Tex thread" no longer shows up on the W.L Gore and Associates' website. Sheesh! Are you stoned when you reply to my posts? |
Another Gorgeous Bay Day!
"Steven Shelikoff" wrote in message ... On 9 Jun 2004 12:12:32 -0700, (basskisser) wrote: One more time for the class dolt. Please show anywhere on the Gore-Tex website where there is any mention of "Gore-Tex thread". Can you do that? Do you really suppose they use Gore-Tex Suture for boat cushions? Yes, because it's the same material under a different name, one called thread for sewing of textiles and one called suture for medical use. Both threads are spun from yarn made of expanded polytetrafluoroethylene (ePTFE) Here is the official Gore products website describing Gore Thread: http://www.gore.com/creative/tenara.html and here is the official Gore products website describing Gore Sutu http://www.goremedical.com/English/P...ture/Index.htm Both of them are official Gore sites, both of them specifically describe their product as thread. What is it that you still do not understand? If you don't believe the websites, why don't you call Gore products on the phone and ask them if they make thread? I can hear it now: basskisser: "Yes, but do actually call it *Gore-Tex thread*"? Rep from Gore-Tex: "Well, we used to...but now we call it Tenara" basskisser: "So it's not called Gore-Tex thread?" Rep from Gore-Tex: "No. Not anymore" basskisser: "Ha! I knew it." (and he runs back to his keyboard to post the results of his conversation) basskisser on computer: "I called Gore-Tex and asked them if they have something called Gore-Tex thread, and they said no". He'll just never get it, Steve. Why bother... |
Another Gorgeous Bay Day!
"NOYB" wrote in message ...
"Steven Shelikoff" wrote in message ... On 9 Jun 2004 12:12:32 -0700, (basskisser) wrote: One more time for the class dolt. Please show anywhere on the Gore-Tex website where there is any mention of "Gore-Tex thread". Can you do that? Do you really suppose they use Gore-Tex Suture for boat cushions? Yes, because it's the same material under a different name, one called thread for sewing of textiles and one called suture for medical use. Both threads are spun from yarn made of expanded polytetrafluoroethylene (ePTFE) Here is the official Gore products website describing Gore Thread: http://www.gore.com/creative/tenara.html and here is the official Gore products website describing Gore Sutu http://www.goremedical.com/English/P...ture/Index.htm Both of them are official Gore sites, both of them specifically describe their product as thread. What is it that you still do not understand? If you don't believe the websites, why don't you call Gore products on the phone and ask them if they make thread? I can hear it now: basskisser: "Yes, but do actually call it *Gore-Tex thread*"? Rep from Gore-Tex: "Well, we used to...but now we call it Tenara" basskisser: "So it's not called Gore-Tex thread?" Rep from Gore-Tex: "No. Not anymore" basskisser: "Ha! I knew it." (and he runs back to his keyboard to post the results of his conversation) basskisser on computer: "I called Gore-Tex and asked them if they have something called Gore-Tex thread, and they said no". He'll just never get it, Steve. Why bother... So in YOUR dimwit eyes, you can call any product in the world by anything you choose, huh? How ****ing stupid can you be? Using your stupid thinking, the old Ford Mustang I've got in the garage, could be called a Jaguar, because they are made by Ford.....simply amazing way of thinking you have there, and foolish. |
Another Gorgeous Bay Day!
"NOYB" wrote in message ...
"basskisser" wrote in message om... "NOYB" wrote in message ink.net... "basskisser" wrote in message om... (Steven Shelikoff) wrote in message ... On 7 Jun 2004 07:01:58 -0700, (basskisser) wrote: "John Smith" wrote in message news:VLJvc.6569$uY.186@attbi_s53... "basskisser" wrote in message Easy, go here, simpleton http://www.gore-tex.com You'll see there is NO Gore-Tex thread. Now, if you believe there is, show me some. I don't know why you can't find the info yourself, but let me help you. Here is a link showing the benefits of Gore-Tex sewing thread on a boat cover or awning. from: http://www.americana.com/fabricawnings/goretex.htm "We know that GORE-TEX® sewing thread never fails due to exposure to the environment. We back up that claim with a full lifetime warranty. If the seams on your boat cover or awning fail before the end of the usual life of the fabric, we'll pay for the repair work." Bass, do you ever get tired of being wrong? You are wrong. I want to see from GORE-TEX'S OWN WEBSITE a reference to "Gore-Tex thread". Now, I understand that a lot of people use the words Gore-Tex generically. I care not about that. NOYB SPECIFICALLY stated "Gore-Tex thread". The website for Gore-Tex Inc. states no such thing. I gave that to you. Only they call it Gore-Tex Suture. Now, if you want to argue the suture means something different than thread, go right ahead. But you'll lose that also since in this case, the suture *is* thread used to surgically close wounds or join tissues. Steve Please show where, on Gore-Tex's website, they say anything about "Gore-Tex thread". You are losing track of the post. NOYB stated that some boat manuf. use "Gore-Tex thread" for stitching seat cushions, etc. Now, do you REALLY think that he meant Gore-Tex sutures???? Are you that stupid!?!? W.L. Gore and Associates introduced Gore-Tex thread in the mid 80's. At that time, they apparently called it Gore-Tex thread. They've since changed the name to "Tenara"...so you will not find it listed as "Gore-Tex thread" on their website. However, here are a number of links discussing "Gore-Tex thread", several of which mention a change in the name to Tenara: "At about the same time, GORE-TEX thread (now known as TENARA) was introduced in a strength compatible for the rigors of a marine enclosure " http://www.ez2cy.com/other_enclosures/e_printable.html "Offering the best in materials, 316 stainless steel tubing & hardware, UV impervious Tenara (formerly Gore Tex) thread" http://coastlinememories.com/gemini.canvas.ad.html " The seat cushions are made from heavy, comfortable 40-ounce vinyl, stitched with weatherproof Gore-Tex thread" http://www.boatingmag.com/article.as...article_id=152 "Doyle Caribbean was the first and is still the only manufacturer to exclusively use Gore-TexT thread for all new canvas and repairs - a thread that is guaranteed for life." http://www.doylesails.com/lofts-na-tortola.htm FINISHING SUPPLIES. a.. Acrylic Binding Tape, 3/4"& 1" b.. Vinyl Binding Tape, 3/4" c.. Cord & Ropes d.. Bobbins e.. Double Sided Seaming Tape f.. VELCRO/ Hook and Loop g.. 3M Spray Adhesives h.. Thread: Anti-Wick and UVR i.. GORE-TEX Thread http://www.mobilecanvas.com/bainbridge.html "Has anyone been using Gore-tex thread in textile conservation? If so, for what purposes?" http://palimpsest.stanford.edu/byfor.../msg00000.html "5 year warranty on structural seams sewn with Gore-Tex thread" and "Seams are tough enough to last a lifetime sewn with Tenara thread by Gore-Tex" http://216.239.39.104/search?q=cache...hread%22&hl=en "Structural seams are sewn with Gore-Tex thread, which has a lifetime warranty." http://www.davebang.com/shelter.htm There are at least 72 instances on google where you can find "Gore-Tex thread"...and most of them deal with its use in marine applications. One more time for the class dolt. Please show anywhere on the Gore-Tex website where there is any mention of "Gore-Tex thread". One more time for the ****ing idiot hillbilly from Snellville: Gore-Tex changed the name of "Gore-Tex thread" to "Tenara" sometime in the late 80's or early 90's. That's why the name "Gore-Tex thread" no longer shows up on the W.L Gore and Associates' website. Sheesh! Are you stoned when you reply to my posts? I'm not from Snellville. I'm not a hillbilly. Can you not get ANYTHING right?? So, using your dimwit way of thinking, I suppose that a piece of beef bologna is a piece of corn, right? I mean, it used to be, until an animal converted it to muscle, then was killed, processed, and turned into bologna. Man, you are dumb. Seriously, do you honestly think that, because there USED to be a product, that there still is, even when the company that MAKES the product doesn't have it anymore??? |
Another Gorgeous Bay Day!
"basskisser" wrote in message om... "NOYB" wrote in message ... "Steven Shelikoff" wrote in message ... On 9 Jun 2004 12:12:32 -0700, (basskisser) wrote: One more time for the class dolt. Please show anywhere on the Gore-Tex website where there is any mention of "Gore-Tex thread". Can you do that? Do you really suppose they use Gore-Tex Suture for boat cushions? Yes, because it's the same material under a different name, one called thread for sewing of textiles and one called suture for medical use. Both threads are spun from yarn made of expanded polytetrafluoroethylene (ePTFE) Here is the official Gore products website describing Gore Thread: http://www.gore.com/creative/tenara.html and here is the official Gore products website describing Gore Sutu http://www.goremedical.com/English/P...ture/Index.htm Both of them are official Gore sites, both of them specifically describe their product as thread. What is it that you still do not understand? If you don't believe the websites, why don't you call Gore products on the phone and ask them if they make thread? I can hear it now: basskisser: "Yes, but do actually call it *Gore-Tex thread*"? Rep from Gore-Tex: "Well, we used to...but now we call it Tenara" basskisser: "So it's not called Gore-Tex thread?" Rep from Gore-Tex: "No. Not anymore" basskisser: "Ha! I knew it." (and he runs back to his keyboard to post the results of his conversation) basskisser on computer: "I called Gore-Tex and asked them if they have something called Gore-Tex thread, and they said no". He'll just never get it, Steve. Why bother... So in YOUR dimwit eyes, you can call any product in the world by anything you choose, huh? How ****ing stupid can you be? Using your stupid thinking, the old Ford Mustang I've got in the garage, could be called a Jaguar, because they are made by Ford.....simply amazing way of thinking you have there, and foolish. Your lack of logic and ability to relate "A" with "B" in an argument never ceases to astound me. Your automobile, with the name "Ford Mustang" on it, can be called a Ford Motor Company automobile...but not a Jaguar. I'll leave it to you to figure out *why*...and how this relates to "Gore-Tex thread". |
Another Gorgeous Bay Day!
"basskisser" wrote in message m... "NOYB" wrote in message ... "basskisser" wrote in message om... "NOYB" wrote in message ink.net... "basskisser" wrote in message om... (Steven Shelikoff) wrote in message ... On 7 Jun 2004 07:01:58 -0700, (basskisser) wrote: "John Smith" wrote in message news:VLJvc.6569$uY.186@attbi_s53... "basskisser" wrote in message Easy, go here, simpleton http://www.gore-tex.com You'll see there is NO Gore-Tex thread. Now, if you believe there is, show me some. I don't know why you can't find the info yourself, but let me help you. Here is a link showing the benefits of Gore-Tex sewing thread on a boat cover or awning. from: http://www.americana.com/fabricawnings/goretex.htm "We know that GORE-TEX® sewing thread never fails due to exposure to the environment. We back up that claim with a full lifetime warranty. If the seams on your boat cover or awning fail before the end of the usual life of the fabric, we'll pay for the repair work." Bass, do you ever get tired of being wrong? You are wrong. I want to see from GORE-TEX'S OWN WEBSITE a reference to "Gore-Tex thread". Now, I understand that a lot of people use the words Gore-Tex generically. I care not about that. NOYB SPECIFICALLY stated "Gore-Tex thread". The website for Gore-Tex Inc. states no such thing. I gave that to you. Only they call it Gore-Tex Suture. Now, if you want to argue the suture means something different than thread, go right ahead. But you'll lose that also since in this case, the suture *is* thread used to surgically close wounds or join tissues. Steve Please show where, on Gore-Tex's website, they say anything about "Gore-Tex thread". You are losing track of the post. NOYB stated that some boat manuf. use "Gore-Tex thread" for stitching seat cushions, etc. Now, do you REALLY think that he meant Gore-Tex sutures???? Are you that stupid!?!? W.L. Gore and Associates introduced Gore-Tex thread in the mid 80's. At that time, they apparently called it Gore-Tex thread. They've since changed the name to "Tenara"...so you will not find it listed as "Gore-Tex thread" on their website. However, here are a number of links discussing "Gore-Tex thread", several of which mention a change in the name to Tenara: "At about the same time, GORE-TEX thread (now known as TENARA) was introduced in a strength compatible for the rigors of a marine enclosure " http://www.ez2cy.com/other_enclosures/e_printable.html "Offering the best in materials, 316 stainless steel tubing & hardware, UV impervious Tenara (formerly Gore Tex) thread" http://coastlinememories.com/gemini.canvas.ad.html " The seat cushions are made from heavy, comfortable 40-ounce vinyl, stitched with weatherproof Gore-Tex thread" http://www.boatingmag.com/article.as...article_id=152 "Doyle Caribbean was the first and is still the only manufacturer to exclusively use Gore-TexT thread for all new canvas and repairs - a thread that is guaranteed for life." http://www.doylesails.com/lofts-na-tortola.htm FINISHING SUPPLIES. a.. Acrylic Binding Tape, 3/4"& 1" b.. Vinyl Binding Tape, 3/4" c.. Cord & Ropes d.. Bobbins e.. Double Sided Seaming Tape f.. VELCRO/ Hook and Loop g.. 3M Spray Adhesives h.. Thread: Anti-Wick and UVR i.. GORE-TEX Thread http://www.mobilecanvas.com/bainbridge.html "Has anyone been using Gore-tex thread in textile conservation? If so, for what purposes?" http://palimpsest.stanford.edu/byfor.../msg00000.html "5 year warranty on structural seams sewn with Gore-Tex thread" and "Seams are tough enough to last a lifetime sewn with Tenara thread by Gore-Tex" http://216.239.39.104/search?q=cache...hread%22&hl=en "Structural seams are sewn with Gore-Tex thread, which has a lifetime warranty." http://www.davebang.com/shelter.htm There are at least 72 instances on google where you can find "Gore-Tex thread"...and most of them deal with its use in marine applications. One more time for the class dolt. Please show anywhere on the Gore-Tex website where there is any mention of "Gore-Tex thread". One more time for the ****ing idiot hillbilly from Snellville: Gore-Tex changed the name of "Gore-Tex thread" to "Tenara" sometime in the late 80's or early 90's. That's why the name "Gore-Tex thread" no longer shows up on the W.L Gore and Associates' website. Sheesh! Are you stoned when you reply to my posts? I'm not from Snellville. I'm not a hillbilly. Can you not get ANYTHING right?? So, using your dimwit way of thinking, I suppose that a piece of beef bologna is a piece of corn, right? Nope. Try again. Here's a hint: Gore-tex thread is to Tenara, as Oscar Meyer lunch meat is to beef bologna. Did you flunk analogies in school? How'd you ever get into college if you couldn't do the word association portion of the SAT! I mean, it used to be, until an animal converted it to muscle, then was killed, processed, and turned into bologna. Man, you are dumb. Seriously, do you honestly think that, because there USED to be a product, that there still is, even when the company that MAKES the product doesn't have it anymore??? They still have it...and it's now called Tenara. |
Another Gorgeous Bay Day!
http://www.bartleby.com/61/22/D0242250.html http://www.urbandictionary.com/define.php?term=Dip**** John H On the 'Poco Loco' out of Deale, MD on the beautiful Chesapeake Bay! |
Another Gorgeous Bay Day!
http://www.bartleby.com/61/22/D0242250.html http://www.urbandictionary.com/define.php?term=Dip**** John H On the 'Poco Loco' out of Deale, MD on the beautiful Chesapeake Bay! |
Another Gorgeous Bay Day!
John H wrote:
http://www.bartleby.com/61/22/D0242250.html http://www.urbandictionary.com/define.php?term=Dip**** John H Hey! My D70 just arrived. Seems to be well-made, though lighter than my D100...bot more than good enough. The strap sucks, though...too narrow. H. |
| All times are GMT +1. The time now is 10:34 AM. |
|
Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 BoatBanter.com