John H. wrote:
On 11 Aug 2005 05:07:43 -0700, wrote:


John H. wrote:
On 10 Aug 2005 04:46:39 -0700, wrote:


Bill McKee wrote:
It looks like a Holly, but would have to have to look at the 351W I took out
of the boat to tell you the make on the carb. Prestolite? You still do
not have a life?

Sure, Bill, I have a great life, now tell me, exactly what carb that
Holly, or Prestolite made had such a number as 300RS? By the way, the
number will be stamped on the carb, and sometimes also the venturi
size.
Here, take a look for yourself:

http://www.ponycarburetors.com/

So, did you ever find the web site you modified with the Moto Guzzi "Desmo"?


--
John H.
On the 'PocoLoco' out of Deale, MD

How the **** would I modify someone else's website????? I proved my
point, you just chose to put blinders on.

You didn't display a web site. You copied, pasted, and added. You tried an
adolescent stunt that didn't work.

You idiot!!!! Let's recap. YOU asked "So, did you ever find the web
site you modified with the Moto Guzzi "Desmo"?" Remember????

Now, I asked "how the **** would I modify someone else's website?"

I'll ask again! How would I modify someone else's website?????

I tried no adolescent stunt. Hell, someone as inept as you can find
websites, can't you? I think you just plain choose NOT to, because the
information shows I'm right, and you're....NOT!

wrote in message
ups.com...

Bill McKee wrote:
My Autolite had the tag on one of the top bolts. Is a marine carb, not
an
automotive carb. Differences are that the vent tubes on top are J tubes,
so
the stuck float pors the fuel down the carb throat, and the throttle
shaft
has some flats and grooves to prevent leakage out the shaft.

Then show me the Autolite "marine carb" that has a model number of
300RS!!!!!


Ok, so what is the tag to identify that comes bolted to the carb?

On 11 Aug 2005 10:03:18 -0700, wrote:


John H. wrote:
On 11 Aug 2005 05:07:43 -0700, wrote:


John H. wrote:
On 10 Aug 2005 04:46:39 -0700, wrote:


Bill McKee wrote:
It looks like a Holly, but would have to have to look at the 351W I took out
of the boat to tell you the make on the carb. Prestolite? You still do
not have a life?

Sure, Bill, I have a great life, now tell me, exactly what carb that
Holly, or Prestolite made had such a number as 300RS? By the way, the
number will be stamped on the carb, and sometimes also the venturi
size.
Here, take a look for yourself:

http://www.ponycarburetors.com/

So, did you ever find the web site you modified with the Moto Guzzi "Desmo"?


--
John H.
On the 'PocoLoco' out of Deale, MD

How the **** would I modify someone else's website????? I proved my
point, you just chose to put blinders on.

You didn't display a web site. You copied, pasted, and added. You tried an
adolescent stunt that didn't work.

You idiot!!!! Let's recap. YOU asked "So, did you ever find the web
site you modified with the Moto Guzzi "Desmo"?" Remember????

Now, I asked "how the **** would I modify someone else's website?"

I'll ask again! How would I modify someone else's website?????

I tried no adolescent stunt. Hell, someone as inept as you can find
websites, can't you? I think you just plain choose NOT to, because the
information shows I'm right, and you're....NOT!

You didn't post the website, dip! How's this?

Moto Guzzi 750 S / 750 S3 1971 1975 748 52 1 1
Moto Guzzi 1000 GS 1978 1983 949 1 0
Moto Guzzi 1000 S 1989 1993 949 0 2
Moto Guzzi 1000 SP / 1000NT 1978 1983 949
Moto Guzzi Kevin's DESMO 1971 1971 1
Moto Guzzi 1000 SP II 1984 1988 949 67 0 1
Moto Guzzi 1100 Sport 1994 1998 1064 90 1 1

See how easy that was? Why don't you just be a man, acknowledge your mistake (or
lie), and live with it?

--
John H.
On the 'PocoLoco' out of Deale, MD

John H. wrote:
On 11 Aug 2005 10:03:18 -0700, wrote:


John H. wrote:
On 11 Aug 2005 05:07:43 -0700, wrote:


John H. wrote:
On 10 Aug 2005 04:46:39 -0700, wrote:


Bill McKee wrote:
It looks like a Holly, but would have to have to look at the 351W I took out
of the boat to tell you the make on the carb. Prestolite? You still do
not have a life?

Sure, Bill, I have a great life, now tell me, exactly what carb that
Holly, or Prestolite made had such a number as 300RS? By the way, the
number will be stamped on the carb, and sometimes also the venturi
size.
Here, take a look for yourself:

http://www.ponycarburetors.com/

So, did you ever find the web site you modified with the Moto Guzzi "Desmo"?


--
John H.
On the 'PocoLoco' out of Deale, MD

How the **** would I modify someone else's website????? I proved my
point, you just chose to put blinders on.

You didn't display a web site. You copied, pasted, and added. You tried an
adolescent stunt that didn't work.

You idiot!!!! Let's recap. YOU asked "So, did you ever find the web
site you modified with the Moto Guzzi "Desmo"?" Remember????

Now, I asked "how the **** would I modify someone else's website?"

I'll ask again! How would I modify someone else's website?????

I tried no adolescent stunt. Hell, someone as inept as you can find
websites, can't you? I think you just plain choose NOT to, because the
information shows I'm right, and you're....NOT!

You didn't post the website, dip! How's this?

Moto Guzzi 750 S / 750 S3 1971 1975 748 52 1 1
Moto Guzzi 1000 GS 1978 1983 949 1 0
Moto Guzzi 1000 S 1989 1993 949 0 2
Moto Guzzi 1000 SP / 1000NT 1978 1983 949
Moto Guzzi Kevin's DESMO 1971 1971 1
Moto Guzzi 1000 SP II 1984 1988 949 67 0 1
Moto Guzzi 1100 Sport 1994 1998 1064 90 1 1

See how easy that was? Why don't you just be a man, acknowledge your mistake (or
lie), and live with it?

What a freakin' idiot you are! Here I thought you were a tad above
people like Fritz, but, just when I'm thinking that, you come along
with some drivel like that!!!!! How stupid and low can you go, John?

Bill McKee wrote:
wrote in message
ups.com...

Bill McKee wrote:
My Autolite had the tag on one of the top bolts. Is a marine carb, not
an
automotive carb. Differences are that the vent tubes on top are J tubes,
so
the stuck float pors the fuel down the carb throat, and the throttle
shaft
has some flats and grooves to prevent leakage out the shaft.

Then show me the Autolite "marine carb" that has a model number of
300RS!!!!!


Ok, so what is the tag to identify that comes bolted to the carb?

I have no idea, but what I do know is it ISN'T identifying the
carb!!!!! Autolite has never, ever made a carb with a model number of
300RS. If you think they have, provide some evidence. I've shown you a
website that correctly identifies the model number stamped on the body
of the carb.

Bassy,
What was the web address to the information you posted concerning the Moto
Guzzi "Desmo"?"


wrote in message
ups.com...

John H. wrote:
On 11 Aug 2005 05:07:43 -0700, wrote:


John H. wrote:
On 10 Aug 2005 04:46:39 -0700, wrote:


Bill McKee wrote:
It looks like a Holly, but would have to have to look at the 351W I
took out
of the boat to tell you the make on the carb. Prestolite? You
still do
not have a life?

Sure, Bill, I have a great life, now tell me, exactly what carb that
Holly, or Prestolite made had such a number as 300RS? By the way, the
number will be stamped on the carb, and sometimes also the venturi
size.
Here, take a look for yourself:

http://www.ponycarburetors.com/

So, did you ever find the web site you modified with the Moto Guzzi
"Desmo"?


--
John H.
On the 'PocoLoco' out of Deale, MD

How the **** would I modify someone else's website????? I proved my
point, you just chose to put blinders on.

You didn't display a web site. You copied, pasted, and added. You tried
an
adolescent stunt that didn't work.

You idiot!!!! Let's recap. YOU asked "So, did you ever find the web
site you modified with the Moto Guzzi "Desmo"?" Remember????

Now, I asked "how the **** would I modify someone else's website?"

I'll ask again! How would I modify someone else's website?????

I tried no adolescent stunt. Hell, someone as inept as you can find
websites, can't you? I think you just plain choose NOT to, because the
information shows I'm right, and you're....NOT!

On Fri, 12 Aug 2005 08:54:19 -0400, "51 st" Smithers Inc wrote:

Bassy,
What was the web address to the information you posted concerning the Moto
Guzzi "Desmo"?"


wrote in message
oups.com...

John H. wrote:
On 11 Aug 2005 05:07:43 -0700, wrote:


John H. wrote:
On 10 Aug 2005 04:46:39 -0700, wrote:


Bill McKee wrote:
It looks like a Holly, but would have to have to look at the 351W I
took out
of the boat to tell you the make on the carb. Prestolite? You
still do
not have a life?

Sure, Bill, I have a great life, now tell me, exactly what carb that
Holly, or Prestolite made had such a number as 300RS? By the way, the
number will be stamped on the carb, and sometimes also the venturi
size.
Here, take a look for yourself:

http://www.ponycarburetors.com/

So, did you ever find the web site you modified with the Moto Guzzi
"Desmo"?


--
John H.
On the 'PocoLoco' out of Deale, MD

How the **** would I modify someone else's website????? I proved my
point, you just chose to put blinders on.

You didn't display a web site. You copied, pasted, and added. You tried
an
adolescent stunt that didn't work.

You idiot!!!! Let's recap. YOU asked "So, did you ever find the web
site you modified with the Moto Guzzi "Desmo"?" Remember????

Now, I asked "how the **** would I modify someone else's website?"

I'll ask again! How would I modify someone else's website?????

I tried no adolescent stunt. Hell, someone as inept as you can find
websites, can't you? I think you just plain choose NOT to, because the
information shows I'm right, and you're....NOT!


There was no web address. It was made up. Of course, bassie's not quite mature
enough to admit his mistake yet (or his lie, as the case may be).

--
John H.
On the 'PocoLoco' out of Deale, MD

51 st wrote:
Bassy,
What was the web address to the information you posted concerning the Moto
Guzzi "Desmo"?"

Do a google search. It's easy. I would give you the info, but you're
such a childish boor, that I'll let you go it alone. a couple of people
here who aren't assholes, have emailed me, and I've given them the
info. So, that being said, you and JohnH think what you want. I don't
really care if either one of you go the rest of your life thinking you
are correct about something, but are wrong.

On 12 Aug 2005 11:19:10 -0700, wrote:


51 st wrote:
Bassy,
What was the web address to the information you posted concerning the Moto
Guzzi "Desmo"?"

Do a google search. It's easy. I would give you the info, but you're
such a childish boor, that I'll let you go it alone. a couple of people
here who aren't assholes, have emailed me, and I've given them the
info. So, that being said, you and JohnH think what you want. I don't
really care if either one of you go the rest of your life thinking you
are correct about something, but are wrong.

You can't even lie well.

--
John H.
On the 'PocoLoco' out of Deale, MD

Kevin,
Did you send the web address to your Alumni friends from U of Penn?

Do you think anyone believes you when you say a number of people emailed you
and asked for the web address, and you sent it to them? You are losing
touch with reality.

The last time I sent you email, Kevin Noble responded. What are you doing
to keep him out of your email?




wrote in message
oups.com...

51 st wrote:
Bassy,
What was the web address to the information you posted concerning the
Moto
Guzzi "Desmo"?"

Do a google search. It's easy. I would give you the info, but you're
such a childish boor, that I'll let you go it alone. a couple of people
here who aren't assholes, have emailed me, and I've given them the
info. So, that being said, you and JohnH think what you want. I don't
really care if either one of you go the rest of your life thinking you
are correct about something, but are wrong.