On 9 Aug 2005 12:30:04 -0700, wrote:


Bill McKee wrote:
The carb one is a carb number.

I've looked up Autolite, Motorcraft, Holley and Rochester with no such
numbers. What make do you presume was used on a 68 427 Ford that I've
missed?

Did you decide to give up on your Moto Guzzi "Desmo" crap and start on something
else?

A man would have admitted his error, or lie as the case may be.

--
John H.
On the 'PocoLoco' out of Deale, MD

On 10 Aug 2005 04:46:39 -0700, wrote:


Bill McKee wrote:
It looks like a Holly, but would have to have to look at the 351W I took out
of the boat to tell you the make on the carb. Prestolite? You still do
not have a life?

Sure, Bill, I have a great life, now tell me, exactly what carb that
Holly, or Prestolite made had such a number as 300RS? By the way, the
number will be stamped on the carb, and sometimes also the venturi
size.
Here, take a look for yourself:

http://www.ponycarburetors.com/

So, did you ever find the web site you modified with the Moto Guzzi "Desmo"?


--
John H.
On the 'PocoLoco' out of Deale, MD

On 10 Aug 2005 11:14:35 -0700, wrote:


Bill McKee wrote:
wrote in message
ups.com...

Bill McKee wrote:
It looks like a Holly, but would have to have to look at the 351W I took
out
of the boat to tell you the make on the carb. Prestolite? You still do
not have a life?

Sure, Bill, I have a great life, now tell me, exactly what carb that
Holly, or Prestolite made had such a number as 300RS? By the way, the
number will be stamped on the carb, and sometimes also the venturi
size.
Here, take a look for yourself:

http://www.ponycarburetors.com/


Get a life, loser! Was an Autolite and the tag was an ID.

No, it wasn't. What did it ID, idiot? Model number 300RS was never,
ever used by Autolite. Look for yourself! the model number for that
particular autolite is on the carb. I need to get a life?? YOU are
arguing a point that you've been PROVEN wrong on, again.......

Does it make a difference to you? When you're wrong, do you admit your mistake
or hide?

--
John H.
On the 'PocoLoco' out of Deale, MD

John H. wrote:
On 10 Aug 2005 04:46:39 -0700, wrote:


Bill McKee wrote:
It looks like a Holly, but would have to have to look at the 351W I took out
of the boat to tell you the make on the carb. Prestolite? You still do
not have a life?

Sure, Bill, I have a great life, now tell me, exactly what carb that
Holly, or Prestolite made had such a number as 300RS? By the way, the
number will be stamped on the carb, and sometimes also the venturi
size.
Here, take a look for yourself:

http://www.ponycarburetors.com/

So, did you ever find the web site you modified with the Moto Guzzi "Desmo"?


--
John H.
On the 'PocoLoco' out of Deale, MD

How the **** would I modify someone else's website????? I proved my
point, you just chose to put blinders on.

John H. wrote:
On 10 Aug 2005 11:14:35 -0700, wrote:


Bill McKee wrote:
wrote in message
ups.com...

Bill McKee wrote:
It looks like a Holly, but would have to have to look at the 351W I took
out
of the boat to tell you the make on the carb. Prestolite? You still do
not have a life?

Sure, Bill, I have a great life, now tell me, exactly what carb that
Holly, or Prestolite made had such a number as 300RS? By the way, the
number will be stamped on the carb, and sometimes also the venturi
size.
Here, take a look for yourself:

http://www.ponycarburetors.com/


Get a life, loser! Was an Autolite and the tag was an ID.

No, it wasn't. What did it ID, idiot? Model number 300RS was never,
ever used by Autolite. Look for yourself! the model number for that
particular autolite is on the carb. I need to get a life?? YOU are
arguing a point that you've been PROVEN wrong on, again.......

Does it make a difference to you?

Yes, he's giving advice that is total bull****, presenting it like he's
absolutely sure, and he's dead wrong. The poster is looking for USEFUL
info.

Bill McKee wrote:
My Autolite had the tag on one of the top bolts. Is a marine carb, not an
automotive carb. Differences are that the vent tubes on top are J tubes, so
the stuck float pors the fuel down the carb throat, and the throttle shaft
has some flats and grooves to prevent leakage out the shaft.

Then show me the Autolite "marine carb" that has a model number of
300RS!!!!!

"John H." wrote in message
...
On 9 Aug 2005 12:30:04 -0700, wrote:


Bill McKee wrote:
The carb one is a carb number.

I've looked up Autolite, Motorcraft, Holley and Rochester with no such
numbers. What make do you presume was used on a 68 427 Ford that I've
missed?

Did you decide to give up on your Moto Guzzi "Desmo" crap and start on
something
else?

A man would have admitted his error, or lie as the case may be.

Kevin is not an adult


--
John H.
On the 'PocoLoco' out of Deale, MD

"John H." wrote in message
...
On 10 Aug 2005 11:14:35 -0700, wrote:


Bill McKee wrote:
wrote in message
ups.com...

Bill McKee wrote:
It looks like a Holly, but would have to have to look at the 351W I
took
out
of the boat to tell you the make on the carb. Prestolite? You
still do
not have a life?

Sure, Bill, I have a great life, now tell me, exactly what carb that
Holly, or Prestolite made had such a number as 300RS? By the way, the
number will be stamped on the carb, and sometimes also the venturi
size.
Here, take a look for yourself:

http://www.ponycarburetors.com/


Get a life, loser! Was an Autolite and the tag was an ID.

No, it wasn't. What did it ID, idiot? Model number 300RS was never,
ever used by Autolite. Look for yourself! the model number for that
particular autolite is on the carb. I need to get a life?? YOU are
arguing a point that you've been PROVEN wrong on, again.......

Does it make a difference to you? When you're wrong, do you admit your
mistake
or hide?

Of course not......ask him about schnapps whiskey ;-)


--
John H.
On the 'PocoLoco' out of Deale, MD

On 11 Aug 2005 05:09:07 -0700, wrote:


John H. wrote:
On 10 Aug 2005 11:14:35 -0700, wrote:


Bill McKee wrote:
wrote in message
ups.com...

Bill McKee wrote:
It looks like a Holly, but would have to have to look at the 351W I took
out
of the boat to tell you the make on the carb. Prestolite? You still do
not have a life?

Sure, Bill, I have a great life, now tell me, exactly what carb that
Holly, or Prestolite made had such a number as 300RS? By the way, the
number will be stamped on the carb, and sometimes also the venturi
size.
Here, take a look for yourself:

http://www.ponycarburetors.com/


Get a life, loser! Was an Autolite and the tag was an ID.

No, it wasn't. What did it ID, idiot? Model number 300RS was never,
ever used by Autolite. Look for yourself! the model number for that
particular autolite is on the carb. I need to get a life?? YOU are
arguing a point that you've been PROVEN wrong on, again.......

Does it make a difference to you?

Yes, he's giving advice that is total bull****, presenting it like he's
absolutely sure, and he's dead wrong. The poster is looking for USEFUL
info.

You made several statements about Moto Guzzi models that were dead wrong. Did
that bother you?

--
John H.
On the 'PocoLoco' out of Deale, MD

On 11 Aug 2005 05:07:43 -0700, wrote:


John H. wrote:
On 10 Aug 2005 04:46:39 -0700, wrote:


Bill McKee wrote:
It looks like a Holly, but would have to have to look at the 351W I took out
of the boat to tell you the make on the carb. Prestolite? You still do
not have a life?

Sure, Bill, I have a great life, now tell me, exactly what carb that
Holly, or Prestolite made had such a number as 300RS? By the way, the
number will be stamped on the carb, and sometimes also the venturi
size.
Here, take a look for yourself:

http://www.ponycarburetors.com/

So, did you ever find the web site you modified with the Moto Guzzi "Desmo"?


--
John H.
On the 'PocoLoco' out of Deale, MD

How the **** would I modify someone else's website????? I proved my
point, you just chose to put blinders on.

You didn't display a web site. You copied, pasted, and added. You tried an
adolescent stunt that didn't work.

--
John H.
On the 'PocoLoco' out of Deale, MD