Home |
Search |
Today's Posts |
#1
![]() |
|||
|
|||
![]()
Help! I want to use my Sunfish as a dingy at my dock. I have affixed the trolling motor to the back metal plate using bungee cords in the past. It worked but it is not very relaxing in case I hit a rock. I bought an Old Towne canoe outboard bracket but it had to stick off the side in the middle and the boat went in circles. My latest thought is to lay a paddle across the stern, tied down with bungees running under the Sunfish, with the motor clamped onto the paddle head on the side. Any suggestions please?
|
#2
![]() |
|||
|
|||
![]()
I need a 100.00 dingy, and will trade 16ft snipe with trailer for one....
"Red Cloud®" wrote in message ... On Fri, 3 Jun 2005 13:58:46 +0100, nancy thompson wrote: Help! I want to use my Sunfish as a dingy at my dock. I have affixed the trolling motor to the back metal plate using bungee cords in the past. It worked but it is not very relaxing in case I hit a rock. I bought an Old Towne canoe outboard bracket but it had to stick off the side in the middle and the boat went in circles. My latest thought is to lay a paddle across the stern, tied down with bungees running under the Sunfish, with the motor clamped onto the paddle head on the side. Any suggestions please? Find a cheap dinghy. A sunfish makes a lousy dinghy, and when ( I said when, not if! ) it capsizes with a battery aboard, you will see the folly of this mis-application of technology. In areas with a lot of boating, you can usually clap your hands and several $100 dinghys will come running. rusty redcloud |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
The Outboard Motor Drive System | General | |||
Increasing Small Outboard Power | General | |||
dead outboard? | Cruising | |||
Tiller and outboard - which one controls ? | General | |||
Converting I/O to Outboard with Jack Plate | General |