Home |
Search |
Today's Posts |
#18
![]() |
|||
|
|||
![]()
sure, the duplex channels are separated so each person transmitting does not
step on the other persons transmission, therefore both could talk and be heard if you had 2 radios or a special radio where you could hear and talk at the same time. But if you have 2 boaters both on the same duplex channel talking to one shore station on its own complemntary channel, each boater should be part of the same conversation. There would be no difference between them as they would both be using the same duplex channel. So therefore another boater ought to be able to listen in if tuned to the same duplex channel that the other boater was using talking to the shore station. Does anyone sell a special radio that allows one to hear and talk at the same time? I dont see that in the catalogs. Using 2 radios is a work around, I suppose. "Charles T. Low" wrote in message .. . No, here's how it goes with duplex: All of the boaters' radios listen to channel 4017 (hypothetical) on frequency 200.150 MHz (hypothetical) and transmit on 200.220 (I'm just making these numbers up). The land station does the reverse. Follow that information on to its logical conclusion and I think you'll see what I mean. A boater and a land station can carry on a conversation just fine, but two boaters cannot. The question is why, and I think it's because more highly-qualified radio operators can use duplex to carry on a two-way conversation, like on a conventional telephone, using a different radio for receiving than transmitting (although the two radios could both be in the same box - like a telephone!). The way we recreational boaters do it, at least to my knowledge and in my experience, is to carry on a one-way conversation, e.g. transmit, then another one-way conversation on another frequency, i.e. receive, although you don't have to change your channel setting to do that - the radio changed frequencies for you, but without changing the same channel number, when you switch back and forth between transmitting and receiving. But one radio can't receive and transmit simultaneously, whether in simplex or duplex mode, so it doesn't make any difference, to the recreational marine VHF radio operator, whether it's duplex or simplex - except for other eavesdropping boaters. Is that any clearer? ==== Charles T. Low - remove "UN" www.boatdocking.com/BDPhoto.html - Photo Contest www.boatdocking.com www.ctlow.ca/Trojan26 - my boat ==== "Scott Downey" wrote in message ... Ok that makes sense that other boaters would only hear the coast guard shore station, BUT what about the guy on the boat the CG shore station is talking to? Isn't he in the same position as anyone else listening? If another boater is on the same frequency as the one the CG is talking to wont he hear both sides? Is the duplex send frequency at the shore station different for each duplex channel? I have heard this before and still dont understand it. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
ICOM M11 delete memory channels? | General | |||
Inside Channels - Chincoteague to Machipongo? | General |