Anyone ever try an electric snowlower?
Not the Mickey Mouse little 'brooms', but the bigger 12 amp model that
resembles a small 5 hp. I see Toro makes a model 1800.
My city lot only has 40' of sidewalk. but I have a 10' wide driveway and
about 30' of wheelchair ramp for my mother.

I spent $200.00 on a 22 inch True Value Snow Chief model back in 1987. Still
works great. I have owned several gas blowers before that. I will never go
back to gas.


"Don White" wrote in message
...
Anyone ever try an electric snowlower?
Not the Mickey Mouse little 'brooms', but the bigger 12 amp model that
resembles a small 5 hp. I see Toro makes a model 1800.
My city lot only has 40' of sidewalk. but I have a 10' wide driveway and
about 30' of wheelchair ramp for my mother.

On Mon, 27 Dec 2004 18:50:06 GMT, "Don White"
wrote:

Anyone ever try an electric snowlower?
Not the Mickey Mouse little 'brooms', but the bigger 12 amp model that
resembles a small 5 hp. I see Toro makes a model 1800.
My city lot only has 40' of sidewalk. but I have a 10' wide driveway and
about 30' of wheelchair ramp for my mother.

The big ones work very well, but with heavy wet snow, they can be
problematic. I've noticed that under heavy loads, this thing really
sucks the juice and has a tendency to stall - you need to be careful
how much snow you try to remove at one time.

This is the one that I purchased for my daughter's office walk - which
has a similar configuration to yours, just a little longer.

http://www2.northerntool.com/product-1/200153624.htm

I have one of these for the apartments. This is also somewhat
problematic with heavy snow, but with smaller cuts works terrific!!
For the heavy 6" or more, I have a 36 inch, 15 horse Ariens. Moves
snow quick. Then again, I have 750' of walk and three driveways to
clear. :)

You may want to consider a small two stage - they make one that is
pretty effective. It doesn't seem like a large area, but 40x10 isn't
all that small.

Just remember, if there is lots of water in the snow, any snowblower
sucks. :)

Good luck.

Later,

Tom

In article ,
Don White wrote:


Anyone ever try an electric snowlower?
Not the Mickey Mouse little 'brooms', but the bigger 12 amp model that
resembles a small 5 hp. I see Toro makes a model 1800.
My city lot only has 40' of sidewalk. but I have a 10' wide driveway and
about 30' of wheelchair ramp for my mother.

1HP = 750 watts, more or less.

So to equal a 5HP engine, you'd need a 31 amp machine!

Eeeeeeek!

Go for the gas, and for wet, thick snow, you need a two-stage.

(From someone who lived in the ****ing snowbelt for more than 30 years, and
hated every minute of it.)

--
--
Karl Denninger ) Internet Consultant & Kids Rights Activist
http://www.denninger.net My home on the net - links to everything I do!
http://scubaforum.org Your UNCENSORED place to talk about DIVING!
http://www.spamcuda.net SPAM FREE mailboxes - FREE FOR A LIMITED TIME!
http://genesis3.blogspot.com Musings Of A Sentient Mind

Karl Denninger wrote:
In article ,
Don White wrote:

Anyone ever try an electric snowlower?
Not the Mickey Mouse little 'brooms', but the bigger 12 amp model
that
resembles a small 5 hp. I see Toro makes a model 1800.
My city lot only has 40' of sidewalk. but I have a 10' wide driveway
and
about 30' of wheelchair ramp for my mother.

1HP = 750 watts, more or less.

So to equal a 5HP engine, you'd need a 31 amp machine!

Eeeeeeek!

Go for the gas, and for wet, thick snow, you need a two-stage.

I have always wondered why electric motors on tools like this are
always listed in amps, rather than watts. Vacuum cleaners, elcetric
lawnmowers, snowblowers.

Well. I know why. If they used HP they wouldn't be able to compete
with gas powered tools. 12 amps is barely 2HP. If your snowblowing
needs can be met with a 2HP machine, then go for it. I don't know if
it's enough - I have never lived in the snow long enough to evaluate
the performance of snowblowers. My parents had one when they lived in
Utah... most of my snowblowing experience has been from visiting them.

If an electric tool will meet your needs, it has another advantage.
"Zero" emissions. I say "zero" with quotes because I view electric
tools and cars as "deferred" emission items. The pollution comes from
a power plant that generated the electricity somewhere else. However a
lot of electricity is generated in this country with relatively low
emissions. Electric stuff is "greener" and it's worth considering IF it
meets your requirements. It's the biggest reason I have an electric
mower.

"Curtis CCR" wrote in message
snip
If an electric tool will meet your needs, it has another advantage.
"Zero" emissions. I say "zero" with quotes because I view electric
tools and cars as "deferred" emission items. The pollution comes from
a power plant that generated the electricity somewhere else. However a
lot of electricity is generated in this country with relatively low
emissions. Electric stuff is "greener" and it's worth considering IF it
meets your requirements. It's the biggest reason I have an electric
mower.

I purchased Craftman's best electric chainsaw last year (12 amp 16" bar)
and was amazed how well it cut. I'm talking 12"-14" diameter Ash branches.
My electric tools are only used on occasion and I tend to keep them for a
lifetime (unless they break). I like the idea of light tools that I can
hang up and forget about until next years project. This is why I took a
chance with the Toro 1800..and also Consumer Reports ratings.

Go for a small 2 stage gas snowblower...you'll be much happier. If you get
enough snow where you are to warrant thinking about buying a snowblower,
then you may as well get one that will be good enough to remove big
snowfalls. Even a small (5 or 6 HP) 2 stage gas snowblower will be better
than an electric one. And, make sure that you get a 2 stage one, not one of
those crappy 1 stage "paddle" gas ones.

If price is a factor, then look for a good used one.

Let's put it this way, I would take a 15 year old 6 horsepower gas 2 stage
snowblower over a brand new electric snowblower any day!

"Don White" wrote in message
...
Anyone ever try an electric snowlower?
Not the Mickey Mouse little 'brooms', but the bigger 12 amp model that
resembles a small 5 hp. I see Toro makes a model 1800.
My city lot only has 40' of sidewalk. but I have a 10' wide driveway and
about 30' of wheelchair ramp for my mother.

These people thing a voltage drop over a too small cord can affect the tool.

Sure!
the lesser voltage, will make the motor pull more than the requiered amps which
will over heat the brush's and commutator in the motor and will usually burn
them out.

Use a heavier chord especially if you have to go a considerable length from the
house or garage.

Tim