dixon wrote:
Now, here's where the troubling part comes in. Lets say the
back of the tank, instead of being 72" away from the front is moved forward
until it is just 1/8 of an inch away from the front glass. Now there is less
than two gallons of water in the tank. I have trouble seeing the glass (3/4
in. thick) bowing from 2,500 lbs of "push" from less than two gallons of
water(16 lbs). I suppose we could even shrink the 1/8 in. to a few
thousandths and put a thimble of water in. Would there still be 2,500 lbs
of outward force from a gram or two of water? Would the heavy duty scale
across the room be forced all the way to the two thousand, five hundred
pound mark?

Here's my theory:
As you decreased the distance between front and back, and the front
galss bowed out, the volume of the tank would increase and the water
depth would lower, decreasing the water pressure on the glass.

Water depth and density determine the water pressure.

"John Wentworth" wrote in message
...
dixon wrote:
Now, here's where the troubling part comes in. Lets say the
back of the tank, instead of being 72" away from the front is moved
forward
until it is just 1/8 of an inch away from the front glass. Now there is
less
than two gallons of water in the tank. I have trouble seeing the glass
(3/4
in. thick) bowing from 2,500 lbs of "push" from less than two gallons of
water(16 lbs). I suppose we could even shrink the 1/8 in. to a few
thousandths and put a thimble of water in. Would there still be 2,500
lbs
of outward force from a gram or two of water? Would the heavy duty scale
across the room be forced all the way to the two thousand, five hundred
pound mark?

Here's my theory:
As you decreased the distance between front and back, and the front
galss bowed out, the volume of the tank would increase and the water
depth would lower, decreasing the water pressure on the glass.

Water depth and density determine the water pressure.

Even with bowing you would still fill the tank to the top, it would just
take slightly more water.
Dixon

Here's my theory:
As you decreased the distance between front and back, and the front
galss bowed out, the volume of the tank would increase and the water
depth would lower, decreasing the water pressure on the glass.

The relationship is between depth and pressure. If you built a tank that was a
mile long and a mile wide, but six inches deep, you would need glass thick
enough to support the water pressure associated with a six-inch depth.

One has to remember that, assuming the tank is level, there is equal pressure
on all the vertical structures containing the water, not just the front glass.
As the tank expands in length or width, the amount of
vertical structure to contain the water increases correspondingly, and
continues to support its share of the pressure.