![]() |
On Sat, 20 Nov 2004 11:40:07 GMT, Short Wave Sportfishing
wrote: Remember the NCR line of transceivers? ================================= The Signal/One CX7. Never actually saw one but I know it was supposed to be the marvel of its' day. Any idea how many were actually built? When I was a kid in the 50s and early 60s, I always aspired to a Collins KWS-1 and 75A-4. They were built like the proverbial brick house. By the early 70s I could actually afford something of that quality, but was living in a Manhattan apartment that was none too big for even the essentials. I ended up with a nice little R L Drake rig that tucked into the corner of the living room. Any experience with the Icom M-802 as a ham rig? I'm thinking of getting one for the Grand Banks. |
----- Original Message -----
From: Wayne.B Newsgroups: rec.boats Sent: Monday, November 22, 2004 9:09 AM Subject: From some old archives........ On Sat, 20 Nov 2004 11:40:07 GMT, Short Wave Sportfishing wrote: Remember the NCR line of transceivers? ================================= The Signal/One CX7. Never actually saw one but I know it was supposed to be the marvel of its' day. Any idea how many were actually built? When I was a kid in the 50s and early 60s, I always aspired to a Collins KWS-1 and 75A-4. They were built like the proverbial brick house. By the early 70s I could actually afford something of that quality, but was living in a Manhattan apartment that was none too big for even the essentials. I ended up with a nice little R L Drake rig that tucked into the corner of the living room. Any experience with the Icom M-802 as a ham rig? I'm thinking of getting one for the Grand Banks. You guys are obviously up to speed on these radios, so I might be bugging you with a few questions. The SSB in our (oops) Mrs.E's soon to be Grand Banks is an Icom M-710, which I assume must be an older or less expensive version of the M-802. Unfortunately, the last SSB transmitter or transciever I ever tuned up or operated had tubes in it. I found some specs on the M-710 at: http://www.northeastmarineelectronic...M710-21-SSB.HT ML Eisboch |
On Mon, 22 Nov 2004 22:18:43 GMT, "Eisboch"
wrote: ----- Original Message ----- From: Wayne.B Newsgroups: rec.boats Sent: Monday, November 22, 2004 9:09 AM Subject: From some old archives........ On Sat, 20 Nov 2004 11:40:07 GMT, Short Wave Sportfishing wrote: Remember the NCR line of transceivers? ================================= The Signal/One CX7. Never actually saw one but I know it was supposed to be the marvel of its' day. Any idea how many were actually built? When I was a kid in the 50s and early 60s, I always aspired to a Collins KWS-1 and 75A-4. They were built like the proverbial brick house. By the early 70s I could actually afford something of that quality, but was living in a Manhattan apartment that was none too big for even the essentials. I ended up with a nice little R L Drake rig that tucked into the corner of the living room. Any experience with the Icom M-802 as a ham rig? I'm thinking of getting one for the Grand Banks. You guys are obviously up to speed on these radios, so I might be bugging you with a few questions. The SSB in our (oops) Mrs.E's soon to be Grand Banks is an Icom M-710, which I assume must be an older or less expensive version of the M-802. Unfortunately, the last SSB transmitter or transciever I ever tuned up or operated had tubes in it. I found some specs on the M-710 at: http://www.northeastmarineelectronic...M710-21-SSB.HT ML Actually, they are pretty much identical radios except that the 802 has a remote mounted control head and speaker. The 710 is an all in one deal. You are correct in that the 802 is a newer version of the 710. Don't try to make sense of the number scheme - none of it makes sense. :) The major difference is that the 802 is almost a completely digital product - there isn't a lot of A-to-D technology in that radio. It also has built-in Digital Signal Processing which is a plus. I think the 710 has mechanical filters, but I'm not sure of that. You might want to check and see if the 710 has all the filters installed. I believe that the 710 tuner is installed. Those are a must on a boat - otherwise you get some odd results with unbalanced antennas. I can give you some grounding pointers when it comes 'round to it to improve tuning and transmit performance. Same with the 802. Icom is a great radio company and I know a lot of hams who use Icom products almost exclusively. I didn't care for the Icom front panel control scheme so my modern ham gear is all Yaesu. Personally, I like the remote control panel deal - I have a Yaesu FT-900 with that scheme and I like it a lot when I'm operating mobile - hides the main radio and you can disconnect the control head and put that in a glove compartment. Ask away - always up for a radio discussion. :) Later, Tom |
Short Wave Sportfishing wrote in message ... I believe that the 710 tuner is installed. Those are a must on a boat - otherwise you get some odd results with unbalanced antennas. I can give you some grounding pointers when it comes 'round to it to improve tuning and transmit performance. Same with the 802. Icom is a great radio company and I know a lot of hams who use Icom products almost exclusively. I didn't care for the Icom front panel control scheme so my modern ham gear is all Yaesu. Personally, I like the remote control panel deal - I have a Yaesu FT-900 with that scheme and I like it a lot when I'm operating mobile - hides the main radio and you can disconnect the control head and put that in a glove compartment. Ask away - always up for a radio discussion. :) Later, Tom It does have the automatic matching network or antenna tuner as they call it. When we officially close on the boat deal, which should be early next week, I am going to pull the radio and antenna out of the boat and play with it in the garage. We just have to finish the hull survey and get the results of the oil analysis. Of course, I will check into the license, I will, I will. I used to stand MARS watches for a while in the Navy, and that's the last time I played with these things. I used to fix 'em but I didn't know anything about using 'em. I am sure I'll have some dumb questions. Eisboch |
On Mon, 22 Nov 2004 23:35:56 GMT, "Eisboch"
wrote: Short Wave Sportfishing wrote in message .. . I believe that the 710 tuner is installed. Those are a must on a boat - otherwise you get some odd results with unbalanced antennas. I can give you some grounding pointers when it comes 'round to it to improve tuning and transmit performance. Same with the 802. Icom is a great radio company and I know a lot of hams who use Icom products almost exclusively. I didn't care for the Icom front panel control scheme so my modern ham gear is all Yaesu. Personally, I like the remote control panel deal - I have a Yaesu FT-900 with that scheme and I like it a lot when I'm operating mobile - hides the main radio and you can disconnect the control head and put that in a glove compartment. Ask away - always up for a radio discussion. :) It does have the automatic matching network or antenna tuner as they call it. When we officially close on the boat deal, which should be early next week, I am going to pull the radio and antenna out of the boat and play with it in the garage. We just have to finish the hull survey and get the results of the oil analysis. Of course, I will check into the license, I will, I will. I used to stand MARS watches for a while in the Navy, and that's the last time I played with these things. I used to fix 'em but I didn't know anything about using 'em. I am sure I'll have some dumb questions. Just remember to keep the antenna in the clear when you are tinkering with the radio. Closeted in the garage can produce some interesting results with the house electrical system, not to mention the cars, trucks, tractors and other odds and ends like TV. Later, Tom |
Short Wave Sportfishing wrote in message ... Just remember to keep the antenna in the clear when you are tinkering with the radio. Closeted in the garage can produce some interesting results with the house electrical system, not to mention the cars, trucks, tractors and other odds and ends like TV. Later, Tom Ya mean I can't use Mrs. E's Lincoln Navigator as a ground plane? Eisboch |
On Mon, 22 Nov 2004 23:44:31 GMT, "Eisboch"
wrote: Short Wave Sportfishing wrote in message .. . Just remember to keep the antenna in the clear when you are tinkering with the radio. Closeted in the garage can produce some interesting results with the house electrical system, not to mention the cars, trucks, tractors and other odds and ends like TV. Ya mean I can't use Mrs. E's Lincoln Navigator as a ground plane? That's pretty much the point. Later, Tom |
Short Wave Sportfishing wrote in message ... On Mon, 22 Nov 2004 23:44:31 GMT, "Eisboch" wrote: Short Wave Sportfishing wrote in message .. . Just remember to keep the antenna in the clear when you are tinkering with the radio. Closeted in the garage can produce some interesting results with the house electrical system, not to mention the cars, trucks, tractors and other odds and ends like TV. Ya mean I can't use Mrs. E's Lincoln Navigator as a ground plane? That's pretty much the point. Later, Tom QSL Eisboch |
I thought you were a beemer guy. I've seen you over there a few times.
Dan Eisboch wrote: Short Wave Sportfishing wrote in message ... Just remember to keep the antenna in the clear when you are tinkering with the radio. Closeted in the garage can produce some interesting results with the house electrical system, not to mention the cars, trucks, tractors and other odds and ends like TV. Later, Tom Ya mean I can't use Mrs. E's Lincoln Navigator as a ground plane? Eisboch |
Dan Krueger wrote in message ink.net... I thought you were a beemer guy. I've seen you over there a few times. Dan Seen me? Where? Used to have a beemer, but got rid of it a year ago. Eisboch |
All times are GMT +1. The time now is 10:13 PM. |
Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 BoatBanter.com