Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Eisboch
 
Posts: n/a
Default

Short Wave Sportfishing wrote:
On Fri, 12 Nov 2004 15:56:31 -0500, Eisboch
wrote:

~~ snippage ~~


Today, she showed up at the marina on a mission. Two hours later she
left the brokerage office having left an offer on a 1982, 36' Grand
Banks Classic. This is to be "her" boat, and I have been invited to
teach her how to handle it next summer when we return from Florida.

Whew ... she never ceases to amaze me, even after 34 years.



The question is are you going to slip them together or on opposite
sides of the marina? :)

By the way, I do boat handling instruction - be glad to help out if
you get to the point where you are about to punch each other out. :)

Later,

Tom


I tried to teach her to drive a stick shift Fiat when we lived in Italy.
Never again. Her girlfriend taught her while my ship was underway and my
wife was there to pick me up when we returned.

I still won't let her drive my S-10. Of course, she also refuses to get
in it.

Eisboch
  #2   Report Post  
Short Wave Sportfishing
 
Posts: n/a
Default

On Fri, 12 Nov 2004 17:39:13 -0500, Eisboch
wrote:

Short Wave Sportfishing wrote:
On Fri, 12 Nov 2004 15:56:31 -0500, Eisboch
wrote:

~~ snippage ~~


Today, she showed up at the marina on a mission. Two hours later she
left the brokerage office having left an offer on a 1982, 36' Grand
Banks Classic. This is to be "her" boat, and I have been invited to
teach her how to handle it next summer when we return from Florida.

Whew ... she never ceases to amaze me, even after 34 years.



The question is are you going to slip them together or on opposite
sides of the marina? :)

By the way, I do boat handling instruction - be glad to help out if
you get to the point where you are about to punch each other out. :)


I tried to teach her to drive a stick shift Fiat when we lived in Italy.
Never again. Her girlfriend taught her while my ship was underway and my
wife was there to pick me up when we returned.

I still won't let her drive my S-10. Of course, she also refuses to get
in it.


Ah - well, I have the patience of Job. Just ask my kids - I taught
them to drive. They liked me better than their professional teachers.

Later,

Tom
  #3   Report Post  
N.L. Eckert
 
Posts: n/a
Default

Well, your wife certainly has good taste in boats. The 36 ft. Grand
Banks has been my fantasy for many years. But, alas, its not to be.
(Any chance of a divorce in th near future?????)
But, seriously, thanks for the best laugh I've had all day.
=====
Norm

  #4   Report Post  
Eisboch
 
Posts: n/a
Default

N.L. Eckert wrote:
Well, your wife certainly has good taste in boats. The 36 ft. Grand
Banks has been my fantasy for many years. But, alas, its not to be.
(Any chance of a divorce in th near future?????)
But, seriously, thanks for the best laugh I've had all day.
=====
Norm


This one is an oldie, but goodie. (1982) It has the little 120hp diesel
that pushes it along at a blistering 8 knots (with a tail wind) and has
been well kept and maintained. The teak deck and exterior brite work is
in very good shape as is the interior. I like the very nautical
atmosphere of it.

It should be fun.

Eisboch
  #5   Report Post  
Gould 0738
 
Posts: n/a
Default

This one is an oldie, but goodie. (1982) It has the little 120hp diesel
that pushes it along at a blistering 8 knots (with a tail wind) and has
been well kept and maintained. The teak deck and exterior brite work is
in very good shape as is the interior. I like the very nautical
atmosphere of it.

It should be fun.

Eisboch



Is your other boat also a single screw?

If not, once she becomes adept at handling the GB she will just sigh patiently
and with deliberate understanding while you "cheat" with a second engine,
thrusters, or what not. :-)

Congrats!


  #6   Report Post  
Eisboch
 
Posts: n/a
Default

Gould 0738 wrote:
This one is an oldie, but goodie. (1982) It has the little 120hp diesel
that pushes it along at a blistering 8 knots (with a tail wind) and has
been well kept and maintained. The teak deck and exterior brite work is
in very good shape as is the interior. I like the very nautical
atmosphere of it.

It should be fun.

Eisboch




Is your other boat also a single screw?

If not, once she becomes adept at handling the GB she will just sigh patiently
and with deliberate understanding while you "cheat" with a second engine,
thrusters, or what not. :-)

Congrats!


Nope, the other boat is a 48' Navigator, twin diesels with both bow and
stern thrusters. I've been bragging to her about my close quarter
maneuvering skills for years now and she believes me because she has
never handled the Navigator, other than steering it while underway.
The ruse will be up once she starts piloting the GB. BTW, it is equipped
with a hydraulic stern thruster that is powered from the engine.

Anything in particular we should watch for in the survey? Other than
the regular stuff, I am interested in any blistering of the hull and of
any water intrusion through the teak deck screws.

Eisboch

  #7   Report Post  
Wayne.B
 
Posts: n/a
Default

On Sat, 13 Nov 2004 01:37:34 -0500, Eisboch
wrote:
Anything in particular we should watch for in the survey? Other than
the regular stuff, I am interested in any blistering of the hull and of
any water intrusion through the teak deck screws.


===================================

Have the fuel tanks pressure tested as part of the survey. They were
typically made from mild steel, aka black iron, and are prone to
rusting. It's a big job to replace them, but frequently needed.

Take a look here for a great deal of GB info:

http://oxfordyachtagency.com/ubb/

also the Trawler World archives:

http://lists.samurai.com/pipermail/t...nd-trawlering/

The 120 hp Lehmans have some interesting quirks but I'm not overly
conversant with the issues since my 49 has DD671s. Parts are alleged
to be available from various sources.

  #8   Report Post  
Eisboch
 
Posts: n/a
Default

Wayne.B wrote:
On Sat, 13 Nov 2004 01:37:34 -0500, Eisboch
wrote:

Anything in particular we should watch for in the survey? Other than
the regular stuff, I am interested in any blistering of the hull and of
any water intrusion through the teak deck screws.



===================================

Have the fuel tanks pressure tested as part of the survey. They were
typically made from mild steel, aka black iron, and are prone to
rusting. It's a big job to replace them, but frequently needed.

Take a look here for a great deal of GB info:

http://oxfordyachtagency.com/ubb/

also the Trawler World archives:

http://lists.samurai.com/pipermail/t...nd-trawlering/

The 120 hp Lehmans have some interesting quirks but I'm not overly
conversant with the issues since my 49 has DD671s. Parts are alleged
to be available from various sources.


Thanks Wayne. And congrats on yours. I will make sure testing the tanks
is on the list.

It's funny, I always admired the GB boats, but never, in my wildest
dreams, did I think I ... well, she... would ever have one. She is proud
as a peacock. I just hope the buyer accepts her offer (he should, it's
a good offer) and that the survey does not uncover anything hidden that
is serious. She would be very disappointed.

Eisboch
  #9   Report Post  
Gould 0738
 
Posts: n/a
Default

The ruse will be up once she starts piloting the GB. BTW, it is equipped
with a hydraulic stern thruster that is powered from the engine.


If her GB is set up to back to port, you'll find the stern thruster handy for
coming alongside in a boat with a starboard helm- but otherwise you'll find the
original stern thruster (the prop and rudder) more than adequate.

Anything in particular we should watch for in the survey? Other than
the regular stuff, I am interested in any blistering of the hull and of
any water intrusion through the teak deck screws.


You'll probably need to be prepared to accept some minor cosmetic blistering,
below the waterline, on a boat of that age. Yes, watch the teak decks, (he says
after replacing the coring under a lot of his own decks).

The advice about the fuel tanks is good. If they prove to be bad, consider
negotiating
a reduction in price sufficient for a complete replacement- but there is now a
less expensive alternative. We have a company in Seattle that cuts a large
inspection hole in the side of the tank,
gets inside and cleans everything up, and then epoxies the interior to seal up
any leaks. You can then "save" the difference between a full replacement and a
rebuilding of the fuel tanks in place for the
scores of little things that even the best surveyor will miss.

There is a lot of wood in that fiberglass boat, and especially if it has been
stored outside you will want to look very carefully at all structural elements.
Your surveyor will keep a sharp eye out for "tea stains" along the flybridge
cowling- brown marks that form when water passes through decomposing wood and
carries along some of the color.

What type of dinghy davit? There have been issues on similar boats where crane
style davits, not installed with the greatest care when the boat was
commissioned or by the after market davit company have compromised the
integrity of the superstructure.

As for the mast and boom, is it wooden or
aluminum? If wooden, check it very closely for wood decay.

It is almost certain that on a vessel of that age somebody has cobbled on the
electronics- fine, but keep a sharp eye out for electrolysis and grounding
issues.

See if you can find a brand of varnish with
horses on the can, and be sure to remind Mrs. E. that the newly acquired teak
forest, with all the requisite sanding, varnishing, and other
chores are hers to deal with. A lot of the GB's at least had the door and
window frames painted out, reducing maintenance there considerably.


  #10   Report Post  
Eisboch
 
Posts: n/a
Default

Gould 0738 wrote:
The ruse will be up once she starts piloting the GB. BTW, it is equipped
with a hydraulic stern thruster that is powered from the engine.



If her GB is set up to back to port, you'll find the stern thruster handy for
coming alongside in a boat with a starboard helm- but otherwise you'll find the
original stern thruster (the prop and rudder) more than adequate.


Anything in particular we should watch for in the survey? Other than
the regular stuff, I am interested in any blistering of the hull and of
any water intrusion through the teak deck screws.



You'll probably need to be prepared to accept some minor cosmetic blistering,
below the waterline, on a boat of that age. Yes, watch the teak decks, (he says
after replacing the coring under a lot of his own decks).

The advice about the fuel tanks is good. If they prove to be bad, consider
negotiating
a reduction in price sufficient for a complete replacement- but there is now a
less expensive alternative. We have a company in Seattle that cuts a large
inspection hole in the side of the tank,
gets inside and cleans everything up, and then epoxies the interior to seal up
any leaks. You can then "save" the difference between a full replacement and a
rebuilding of the fuel tanks in place for the
scores of little things that even the best surveyor will miss.

There is a lot of wood in that fiberglass boat, and especially if it has been
stored outside you will want to look very carefully at all structural elements.
Your surveyor will keep a sharp eye out for "tea stains" along the flybridge
cowling- brown marks that form when water passes through decomposing wood and
carries along some of the color.

What type of dinghy davit? There have been issues on similar boats where crane
style davits, not installed with the greatest care when the boat was
commissioned or by the after market davit company have compromised the
integrity of the superstructure.

As for the mast and boom, is it wooden or
aluminum? If wooden, check it very closely for wood decay.

It is almost certain that on a vessel of that age somebody has cobbled on the
electronics- fine, but keep a sharp eye out for electrolysis and grounding
issues.

See if you can find a brand of varnish with
horses on the can, and be sure to remind Mrs. E. that the newly acquired teak
forest, with all the requisite sanding, varnishing, and other
chores are hers to deal with. A lot of the GB's at least had the door and
window frames painted out, reducing maintenance there considerably.



Thanks for the suggestions Chuck. For some reason I have more interest
in this boat buying process than that I have had in any of the other
boats we have owned. I suppose it's because you learn more each time
but I also think it's due to the flavor of this particular boat and my
wife's excitement. When we walked down the dock to the slip for her to
take a look at it she stopped as soon as she saw it and just grinned
from ear to ear and said, "That's it! I love it! That's my boat!"

BTW, the masts and boom are aluminum. Although there is a nicely
varnished dinghy cradle over the aft cabin, it doesn't appear to have
been used. The boat comes with a small zodiac and outboard that are
currently stored on the swim platform.

We sure have a lot to learn about trawler style boats. Wait until she
finds out there is a sail for the aft mast and boom.

Thanks again,

Eisboch


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Abandonded wife kills fisherman husband Harry Krause General 1 August 21st 04 05:36 AM
Oh, the horror, the horror....Scotty's wife explodes Bobsprit ASA 2 January 30th 04 07:12 AM
A Dickens Christmas Harry Krause General 0 December 25th 03 11:30 AM


All times are GMT +1. The time now is 06:26 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017