Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
calhoun
 
Posts: n/a
Default Evenrude only runs wide open

HI

1986 4HP, runs great wide open but will not run slow unless the choke is
partially pulled. This has been a problem that has slowly developed over the
season. I used to be able to use the mixture screw and get it to run at
troll speed. That no longer can be adjusted enough. Any ideas on the cause?

thanks

Paul


  #2   Report Post  
John S
 
Posts: n/a
Default

On Sun, 15 Aug 2004 21:23:22 GMT, "calhoun"
wrote:

HI

1986 4HP, runs great wide open but will not run slow unless the choke is
partially pulled. This has been a problem that has slowly developed over the
season. I used to be able to use the mixture screw and get it to run at
troll speed. That no longer can be adjusted enough. Any ideas on the cause?

thanks

Paul


Gumming up of the carb idle jets? Just a thought. Have you tried a
lot of gumout?

Had a V8 catch me like that once.



Regards
John S
  #3   Report Post  
Tony Thomas
 
Posts: n/a
Default

Rebuild the carb.

--
Tony
my boats at http://t.thomas.home.mchsi.com

"calhoun" wrote in message
...
HI

1986 4HP, runs great wide open but will not run slow unless the choke is
partially pulled. This has been a problem that has slowly developed over

the
season. I used to be able to use the mixture screw and get it to run at
troll speed. That no longer can be adjusted enough. Any ideas on the

cause?

thanks

Paul




  #4   Report Post  
Mikkilla
 
Posts: n/a
Default



HI

1986 4HP, runs great wide open but will not run slow unless the choke is
partially pulled. This has been a problem that has slowly developed over the
season. I used to be able to use the mixture screw and get it to run at
troll speed. That no longer can be adjusted enough. Any ideas on the cause?

thanks

Paul



Your Idle/slow spped circut in the carb is either gummed up OR your mixture
needle is worn down and is now letting to much air by. pull the needle out look
at the tip.. does it have a grove in it.. does it even have a sharp point
anymore? These carbs are really easy to pull and clean out don't be afraid of
it really isn't much to them. But if you have the Black Thumb of death on
fixing mechanical things. i leave it be and have a boat mechanic fix it.. and
if it takes one more then a hour to fix. they are a idiot.

Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Boat Show/ Open House Kevin General 0 April 16th 04 07:12 AM
rec.boats.paddle sea kayaking FAQ [email protected] General 0 March 18th 04 09:15 AM
rec.boats.paddle sea kayaking FAQ [email protected] General 0 February 16th 04 10:02 AM
rec.boats.paddle sea kayaking FAQ [email protected] General 0 January 16th 04 09:19 AM


All times are GMT +1. The time now is 05:24 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017