On Tue, 30 Oct 2018 13:35:21 -0400, Keyser Soze
wrote:

For your insulting pleasure...

https://flic.kr/p/QoRPP1

Aero Precision pieces and parts, 18" barrel for .308, 15" handguard, et
cetera. Everything went together properly, only dropped a few really
small pieces on the floor. Still hanven't put on "fancy" muzzle device.
Hope to finish up lower this week...it has many more pieces and parts,
so...more to drop on the floor.

Perfect melding of an assault weapon and a sniper rifle. See you on
the news.

On 10/30/18 3:09 PM, wrote:
On Tue, 30 Oct 2018 13:35:21 -0400, Keyser Soze
wrote:

For your insulting pleasure...

https://flic.kr/p/QoRPP1

Aero Precision pieces and parts, 18" barrel for .308, 15" handguard, et
cetera. Everything went together properly, only dropped a few really
small pieces on the floor. Still hanven't put on "fancy" muzzle device.
Hope to finish up lower this week...it has many more pieces and parts,
so...more to drop on the floor.

Perfect melding of an assault weapon and a sniper rifle. See you on
the news.


According to the State of Maryland, where I live, these .308 rifles are
"too heavy" to be handled like .223/5.56 ARs, and therefore are not
prohibited.

You think I'll make the news for blowing up soda cans/bottles, eh?
This isn't Florida...I don't plan on having sex with them.

On Tue, 30 Oct 2018 15:13:56 -0400, Keyser Soze
wrote:

On 10/30/18 3:09 PM, wrote:
On Tue, 30 Oct 2018 13:35:21 -0400, Keyser Soze
wrote:

For your insulting pleasure...

https://flic.kr/p/QoRPP1

Aero Precision pieces and parts, 18" barrel for .308, 15" handguard, et
cetera. Everything went together properly, only dropped a few really
small pieces on the floor. Still hanven't put on "fancy" muzzle device.
Hope to finish up lower this week...it has many more pieces and parts,
so...more to drop on the floor.

Perfect melding of an assault weapon and a sniper rifle. See you on
the news.


According to the State of Maryland, where I live, these .308 rifles are
"too heavy" to be handled like .223/5.56 ARs, and therefore are not
prohibited.

I agree there were a bunch of morons writing those laws but they were
democrats so what do you expect?

An M1A that shoots the same rounds and weighs at least a pound more
than an AR-10 IS an assault weapon.
The chinese knockoff of the M1A, the Norinco M-14 is OK. They are
identical and from a couple feet away you can't tell them apart.
Without looking at the stamp on the receiver, I doubt you could with
them in your hand.

Stupid people writing stupid laws.

You just own a gun that slipped through a loop hole, like the rest of
your assault weapons.

On 10/30/18 10:51 PM, wrote:
On Tue, 30 Oct 2018 15:13:56 -0400, Keyser Soze
wrote:

On 10/30/18 3:09 PM, wrote:
On Tue, 30 Oct 2018 13:35:21 -0400, Keyser Soze
wrote:

For your insulting pleasure...

https://flic.kr/p/QoRPP1

Aero Precision pieces and parts, 18" barrel for .308, 15" handguard, et
cetera. Everything went together properly, only dropped a few really
small pieces on the floor. Still hanven't put on "fancy" muzzle device.
Hope to finish up lower this week...it has many more pieces and parts,
so...more to drop on the floor.

Perfect melding of an assault weapon and a sniper rifle. See you on
the news.


According to the State of Maryland, where I live, these .308 rifles are
"too heavy" to be handled like .223/5.56 ARs, and therefore are not
prohibited.

I agree there were a bunch of morons writing those laws but they were
democrats so what do you expect?

An M1A that shoots the same rounds and weighs at least a pound more
than an AR-10 IS an assault weapon.
The chinese knockoff of the M1A, the Norinco M-14 is OK. They are
identical and from a couple feet away you can't tell them apart.
Without looking at the stamp on the receiver, I doubt you could with
them in your hand.

Stupid people writing stupid laws.

You just own a gun that slipped through a loop hole, like the rest of
your assault weapons.


I follow the firearms laws in my state to the letter. I don't write
these laws, but I find out what they are, and I obey them. If these laws
annoy you, as they seem to, why, that's all good.

On 10/31/2018 6:50 AM, Keyser Soze wrote:
On 10/30/18 10:51 PM, wrote:
On Tue, 30 Oct 2018 15:13:56 -0400, Keyser Soze
wrote:

On 10/30/18 3:09 PM, wrote:
On Tue, 30 Oct 2018 13:35:21 -0400, Keyser Soze
wrote:

For your insulting pleasure...

https://flic.kr/p/QoRPP1

Aero Precision pieces and parts, 18" barrel for .308, 15"
handguard, et
cetera. Everything went together properly, only dropped a few really
small pieces on the floor. Still hanven't put on "fancy" muzzle
device.
Hope to finish up lower this week...it has many more pieces and parts,
so...more to drop on the floor.

Perfect melding of an assault weapon and a sniper rifle. See you on
the news.


According to the State of Maryland, where I live, these .308 rifles are
"too heavy" to be handled like .223/5.56 ARs, and therefore are not
prohibited.

I agree there were a bunch of morons writing those laws but they were
democrats so what do you expect?

An M1A that shoots the same rounds and weighs at least a pound more
than an AR-10 IS an assault weapon.
The chinese knockoff of the M1A, the Norinco M-14 is OK. They are
identical and from a couple feet away you can't tell them apart.
Without looking at the stamp on the receiver, I doubt you could with
them in your hand.

Stupid people writing stupid laws.

You just own a gun that slipped through a loop hole, like the rest of
your assault weapons.


I follow the firearms laws in my state to the letter. I don't write
these laws, but I find out what they are, and I obey them. If these laws
annoy you, as they seem to, why, that's all good.




I find it a bit amusing that you claim to follow firearms laws "to the
letter" and acknowledge that you "don't write them" but when it comes
to Trump trying to follow and enforce immigration laws, you're totally
against it.

On 10/31/18 7:56 AM, Mr. Luddite wrote:
On 10/31/2018 6:50 AM, Keyser Soze wrote:
On 10/30/18 10:51 PM, wrote:
On Tue, 30 Oct 2018 15:13:56 -0400, Keyser Soze
wrote:

On 10/30/18 3:09 PM, wrote:
On Tue, 30 Oct 2018 13:35:21 -0400, Keyser Soze
wrote:

For your insulting pleasure...

https://flic.kr/p/QoRPP1

Aero Precision pieces and parts, 18" barrel for .308, 15"
handguard, et
cetera. Everything went together properly, only dropped a few really
small pieces on the floor. Still hanven't put on "fancy" muzzle
device.
Hope to finish up lower this week...it has many more pieces and
parts,
so...more to drop on the floor.

Perfect melding of an assault weapon and a sniper rifle. See you on
the news.


According to the State of Maryland, where I live, these .308 rifles are
"too heavy" to be handled like .223/5.56 ARs, and therefore are not
prohibited.

I agree there were a bunch of morons writing those laws but they were
democrats so what do you expect?

An M1A that shoots the same rounds and weighs at least a pound more
than an AR-10 IS an assault weapon.
The chinese knockoff of the M1A, the Norinco M-14 is OK. They are
identical and from a couple feet away you can't tell them apart.
Without looking at the stamp on the receiver, I doubt you could with
them in your hand.

Stupid people writing stupid laws.

You just own a gun that slipped through a loop hole, like the rest of
your assault weapons.


I follow the firearms laws in my state to the letter. I don't write
these laws, but I find out what they are, and I obey them. If these
laws annoy you, as they seem to, why, that's all good.




I find it a bit amusing that you claim to follow firearms laws "to the
letter" and acknowledge that you "don't write them"Â* but when it comes
to Trump trying to follow and enforce immigration laws, you're totally
against it.



The Trump Admin's "enforcement" is based upon racism, xenophobia, and
the desire to feed red meat and fear to its base voters, and nothing
else. Maybe you fall for Trump's hatred, lies, and bull****, but I don't.

Keyser Soze wrote:
On 10/31/18 7:56 AM, Mr. Luddite wrote:
On 10/31/2018 6:50 AM, Keyser Soze wrote:
On 10/30/18 10:51 PM, wrote:
On Tue, 30 Oct 2018 15:13:56 -0400, Keyser Soze
wrote:

On 10/30/18 3:09 PM, wrote:
On Tue, 30 Oct 2018 13:35:21 -0400, Keyser Soze
wrote:

For your insulting pleasure...

https://flic.kr/p/QoRPP1

Aero Precision pieces and parts, 18" barrel for .308, 15"
handguard, et
cetera. Everything went together properly, only dropped a few really
small pieces on the floor. Still hanven't put on "fancy" muzzle
device.
Hope to finish up lower this week...it has many more pieces and
parts,
so...more to drop on the floor.

Perfect melding of an assault weapon and a sniper rifle. See you on
the news.


According to the State of Maryland, where I live, these .308 rifles are
"too heavy" to be handled like .223/5.56 ARs, and therefore are not
prohibited.

I agree there were a bunch of morons writing those laws but they were
democrats so what do you expect?

An M1A that shoots the same rounds and weighs at least a pound more
than an AR-10 IS an assault weapon.
The chinese knockoff of the M1A, the Norinco M-14 is OK. They are
identical and from a couple feet away you can't tell them apart.
Without looking at the stamp on the receiver, I doubt you could with
them in your hand.

Stupid people writing stupid laws.

You just own a gun that slipped through a loop hole, like the rest of
your assault weapons.


I follow the firearms laws in my state to the letter. I don't write
these laws, but I find out what they are, and I obey them. If these
laws annoy you, as they seem to, why, that's all good.




I find it a bit amusing that you claim to follow firearms laws "to the
letter" and acknowledge that you "don't write them"Â* but when it comes
to Trump trying to follow and enforce immigration laws, you're totally
against it.



The Trump Admin's "enforcement" is based upon racism, xenophobia, and
the desire to feed red meat and fear to its base voters, and nothing
else. Maybe you fall for Trump's hatred, lies, and bull****, but I don't.


And you follow the letter of the law regards firearms so you can possess a
firearm that is against the spirit of the law.

On 10/31/2018 9:57 AM, Keyser Soze wrote:
On 10/31/18 7:56 AM, Mr. Luddite wrote:
On 10/31/2018 6:50 AM, Keyser Soze wrote:
On 10/30/18 10:51 PM, wrote:
On Tue, 30 Oct 2018 15:13:56 -0400, Keyser Soze
wrote:

On 10/30/18 3:09 PM, wrote:
On Tue, 30 Oct 2018 13:35:21 -0400, Keyser Soze
wrote:

For your insulting pleasure...

https://flic.kr/p/QoRPP1

Aero Precision pieces and parts, 18" barrel for .308, 15"
handguard, et
cetera. Everything went together properly, only dropped a few really
small pieces on the floor. Still hanven't put on "fancy" muzzle
device.
Hope to finish up lower this week...it has many more pieces and
parts,
so...more to drop on the floor.

Perfect melding of an assault weapon and a sniper rifle. See you on
the news.


According to the State of Maryland, where I live, these .308 rifles
are
"too heavy" to be handled like .223/5.56 ARs, and therefore are not
prohibited.

I agree there were a bunch of morons writing those laws but they were
democrats so what do you expect?

An M1A that shoots the same rounds and weighs at least a pound more
than an AR-10 IS an assault weapon.
The chinese knockoff of the M1A, the Norinco M-14 is OK. They are
identical and from a couple feet away you can't tell them apart.
Without looking at the stamp on the receiver, I doubt you could with
them in your hand.

Stupid people writing stupid laws.

You just own a gun that slipped through a loop hole, like the rest of
your assault weapons.


I follow the firearms laws in my state to the letter. I don't write
these laws, but I find out what they are, and I obey them. If these
laws annoy you, as they seem to, why, that's all good.




I find it a bit amusing that you claim to follow firearms laws "to the
letter" and acknowledge that you "don't write them"Â* but when it comes
to Trump trying to follow and enforce immigration laws, you're totally
against it.



The Trump Admin's "enforcement" is basedÂ* upon racism, xenophobia, and
the desire to feed red meat and fear to its base voters, and nothing
else. Maybe you fall for Trump's hatred, lies, and bull****, butÂ* IÂ* don't.


Standard Dem answer again with "racism" at the top of the list.

Amazing.

On Wed, 31 Oct 2018 06:50:49 -0400, Keyser Soze
wrote:

On 10/30/18 10:51 PM, wrote:
On Tue, 30 Oct 2018 15:13:56 -0400, Keyser Soze
wrote:

On 10/30/18 3:09 PM, wrote:
On Tue, 30 Oct 2018 13:35:21 -0400, Keyser Soze
wrote:

For your insulting pleasure...

https://flic.kr/p/QoRPP1

Aero Precision pieces and parts, 18" barrel for .308, 15" handguard, et
cetera. Everything went together properly, only dropped a few really
small pieces on the floor. Still hanven't put on "fancy" muzzle device.
Hope to finish up lower this week...it has many more pieces and parts,
so...more to drop on the floor.

Perfect melding of an assault weapon and a sniper rifle. See you on
the news.


According to the State of Maryland, where I live, these .308 rifles are
"too heavy" to be handled like .223/5.56 ARs, and therefore are not
prohibited.

I agree there were a bunch of morons writing those laws but they were
democrats so what do you expect?

An M1A that shoots the same rounds and weighs at least a pound more
than an AR-10 IS an assault weapon.
The chinese knockoff of the M1A, the Norinco M-14 is OK. They are
identical and from a couple feet away you can't tell them apart.
Without looking at the stamp on the receiver, I doubt you could with
them in your hand.

Stupid people writing stupid laws.

You just own a gun that slipped through a loop hole, like the rest of
your assault weapons.


I follow the firearms laws in my state to the letter. I don't write
these laws, but I find out what they are, and I obey them. If these laws
annoy you, as they seem to, why, that's all good.


Any absurd law annoys me. It just provides precedent for other people
to write more absurd laws.