![]() |
Gotta Go!
John H. Wrote in message:
On Mon, 02 Jul 2018 08:03:24 -0400, Wayne.B wrote: On Mon, 02 Jul 2018 07:08:22 -0400, John H. wrote: Tim - keep everyone on the up and up. Remington Ryde starts a day early this year. Hope to see some of you folks there. Some great groups will be playing: https://remingtonryde.com/remington-...grass-festival === Enjoy John, and have a great time. Hope the weather is good for you. Great time, thanks! Weather was perfect. Had to turn on the heat a couple nights as temps dropped to low 50's. Not one drop of rain once the music started on Wednesday. And, most importantly, didn't break anything on the RV. But...I think a wheel bearing seal is leaking so will get the bearings repacked (or replaced) and resealed tomorrow. Consider installing bearing buddies along with the seals. If you want the job done right do it yourself. -- x ----Android NewsGroup Reader---- http://usenet.sinaapp.com/ |
Gotta Go!
John H. Wrote in message:
On Mon, 2 Jul 2018 14:24:30 -0400, Keyser Soze wrote: On 7/2/18 1:37 PM, justan wrote: Keyser Soze Wrote in message: On 7/2/18 10:52 AM, Tim wrote: John H Tim - keep everyone on the up and up. Remington Ryde starts a day early this year. Hope to see some of you folks there. Some great groups will be playing: https://remingtonryde.com/remington-...grass-festival ...... Have a great time, John! What could be more fun sitting in a hot, dusty, humid, rainy field for a few days, alternating with living out of a trailer? Jealous? Haven't done anything fun lately? Sitting around a hot, dusty, rainy field for a few days, alternating with living out of a trailer is...fun? Maybe it reminds him of his glory days at Ft. Leonard Wood. Besides, we're leaving town in a few days. No trailers involved. When you're signing in at the Motel 6, and a bedbug walks across the form, just realize it's looking for your room number! A little spittle on my screen wont hurt if I wipe it off quickly, right???? -- x ----Android NewsGroup Reader---- http://usenet.sinaapp.com/ |
Gotta Go!
Justine giggles.... "A little spittle on my screen wont hurt if I wipe it off quickly,Â* Â*right???" You're asking the right person about spittle. The John drools and spittles all over himself non stop. |
Gotta Go!
On 7/8/2018 6:56 PM, justan wrote:
John H. Wrote in message: On Mon, 02 Jul 2018 08:03:24 -0400, Wayne.B wrote: On Mon, 02 Jul 2018 07:08:22 -0400, John H. wrote: Tim - keep everyone on the up and up. Remington Ryde starts a day early this year. Hope to see some of you folks there. Some great groups will be playing: https://remingtonryde.com/remington-...grass-festival === Enjoy John, and have a great time. Hope the weather is good for you. Great time, thanks! Weather was perfect. Had to turn on the heat a couple nights as temps dropped to low 50's. Not one drop of rain once the music started on Wednesday. And, most importantly, didn't break anything on the RV. But...I think a wheel bearing seal is leaking so will get the bearings repacked (or replaced) and resealed tomorrow. Consider installing bearing buddies along with the seals. If you want the job done right do it yourself. Bearing Buddies. Best invention since the wheel. |
Gotta Go!
True North Wrote in message:
Justine giggles.... "A little spittle on my screen wont hurt if I wipe it off quickly, right???" You're asking the right person about spittle. The John drools and spittles all over himself non stop. Now thats the kind of trash talk Fat Harry uses. I think you'll make a good stand in when he croaks. -- x ----Android NewsGroup Reader---- http://usenet.sinaapp.com/ |
Gotta Go!
On Sun, 8 Jul 2018 19:14:44 -0400, "Mr. Luddite"
wrote: On 7/8/2018 6:56 PM, justan wrote: John H. Wrote in message: On Mon, 02 Jul 2018 08:03:24 -0400, Wayne.B wrote: On Mon, 02 Jul 2018 07:08:22 -0400, John H. wrote: Tim - keep everyone on the up and up. Remington Ryde starts a day early this year. Hope to see some of you folks there. Some great groups will be playing: https://remingtonryde.com/remington-...grass-festival === Enjoy John, and have a great time. Hope the weather is good for you. Great time, thanks! Weather was perfect. Had to turn on the heat a couple nights as temps dropped to low 50's. Not one drop of rain once the music started on Wednesday. And, most importantly, didn't break anything on the RV. But...I think a wheel bearing seal is leaking so will get the bearings repacked (or replaced) and resealed tomorrow. Consider installing bearing buddies along with the seals. If you want the job done right do it yourself. Bearing Buddies. Best invention since the wheel. I said earlier, I just pulled the hubs on my boat trailer after 25 years of being totally ignored except a little shot of grease in the bearing buddies and they were fine. That is after being dunked in salt water several times a year and then just parked. |
Gotta Go!
On Sun, 08 Jul 2018 16:16:24 -0400, Wayne.B wrote:
On Sun, 08 Jul 2018 13:35:48 -0400, John H. wrote: And, most importantly, didn't break anything on the RV. But...I think a wheel bearing seal is leaking so will get the bearings repacked (or replaced) and resealed tomorrow. === Heh, why should land cruising be different than boat cruising? The definition of boat cruising is fixing things in exotic places. And of course "BOAT" stands for Break Out Another Thousand. RV's aren't quite as bad. But they do require a fair amount of maintenance. A new member of our camping group had just bought his 5th wheel trailer and brought it to a campout for the first time. He'd bought a rig that had been sitting on the dealer's lot for a few years. His refrigerator wasn't working. I asked if he had the manual and he had to go look. When he came out he said he wasn't 'mechanically oriented'. I told him he'd better get mechanically oriented, or rich, or an automobile and stay in motels. |
Gotta Go!
On Sun, 8 Jul 2018 18:56:12 -0400 (EDT), justan wrote:
John H. Wrote in message: On Mon, 02 Jul 2018 08:03:24 -0400, Wayne.B wrote: On Mon, 02 Jul 2018 07:08:22 -0400, John H. wrote: Tim - keep everyone on the up and up. Remington Ryde starts a day early this year. Hope to see some of you folks there. Some great groups will be playing: https://remingtonryde.com/remington-...grass-festival === Enjoy John, and have a great time. Hope the weather is good for you. Great time, thanks! Weather was perfect. Had to turn on the heat a couple nights as temps dropped to low 50's. Not one drop of rain once the music started on Wednesday. And, most importantly, didn't break anything on the RV. But...I think a wheel bearing seal is leaking so will get the bearings repacked (or replaced) and resealed tomorrow. Consider installing bearing buddies along with the seals. If you want the job done right do it yourself. I've been very happy with the work done by the shop I use, and haven't gotten brave enough to do the job in the driveway. Bearing buddies are installed. I try to get them repacked every two years, but slipped this year. |
Gotta Go!
On Mon, 09 Jul 2018 06:23:28 -0400, John H.
wrote: On Sun, 08 Jul 2018 16:16:24 -0400, Wayne.B wrote: On Sun, 08 Jul 2018 13:35:48 -0400, John H. wrote: And, most importantly, didn't break anything on the RV. But...I think a wheel bearing seal is leaking so will get the bearings repacked (or replaced) and resealed tomorrow. === Heh, why should land cruising be different than boat cruising? The definition of boat cruising is fixing things in exotic places. And of course "BOAT" stands for Break Out Another Thousand. RV's aren't quite as bad. But they do require a fair amount of maintenance. A new member of our camping group had just bought his 5th wheel trailer and brought it to a campout for the first time. He'd bought a rig that had been sitting on the dealer's lot for a few years. His refrigerator wasn't working. I asked if he had the manual and he had to go look. When he came out he said he wasn't 'mechanically oriented'. I told him he'd better get mechanically oriented, or rich, or an automobile and stay in motels. === That goes double for boats. We just had to pay a mechanic to fix a minor but annoying oil leak on the port engine. It required special tools, parts and skills (two new high pressure hoses) or I would have tackled it myself. After waiting in the job queue for several weeks we finally got it fixed. Total tab? About a boat buck. |
Gotta Go!
Mr. Luddite wrote:
On 7/8/2018 6:56 PM, justan wrote: John H. Wrote in message: On Mon, 02 Jul 2018 08:03:24 -0400, Wayne.B wrote: On Mon, 02 Jul 2018 07:08:22 -0400, John H. wrote: Tim - keep everyone on the up and up. Remington Ryde starts a day early this year. Hope to see some of you folks there. Some great groups will be playing: https://remingtonryde.com/remington-...grass-festival === Enjoy John, and have a great time. Hope the weather is good for you. Great time, thanks! Weather was perfect. Had to turn on the heat a couple nights as temps dropped to low 50's. Not one drop of rain once the music started on Wednesday. And, most importantly, didn't break anything on the RV. But...I think a wheel bearing seal is leaking so will get the bearings repacked (or replaced) and resealed tomorrow. Consider installing bearing buddies along with the seals. If you want the job done right do it yourself. Bearing Buddies. Best invention since the wheel. On a trailer that does not hit the water, probably not an improvement. I have Vault Hubs on my trailer. No bearing problems since new. Regreased them two years ago when I had to replace a hub/disk when a break pad came apart. |
All times are GMT +1. The time now is 09:22 AM. |
Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 BoatBanter.com