Home |
Search |
Today's Posts |
#13
posted to rec.boats
|
|||
|
|||
It’s real.....
On Mon, 11 Jun 2018 10:05:21 -0700 (PDT), Tim wrote: On Sun, 10 Jun 2018 20:54:53 -0700 (PDT), Tim wrote: - show quoted text - That is probably 3500 hours or so. How much was in salt water ;-) ———/- None that I know of Greg. It’s alwai been a fresh lake craft. I looked over the toons and no pitting that I could tell I was really talking about your 127k mile Mercury but that is good news on the pontoon. Pitting on the pontoons will be right at the water line and the spider cracks will be at the welds where it joins to the risers. Usually they are in the back one or two. The other thing that can crack welds is hitting something hard with one pontoon and "racking" the boat. Again it usually shows up in the corners. If in doubt, pressure test the toons and look around with soapy water in a spray bottle. A shop vac on "blow" is plenty of pressure for that. The other thing you want to look at is the deck rotting. Look at the edges of the sheets and at penetrations. That is where it starts. If everything was sealed well, the deck will last decades. .......... I’ve looked it over well for cracks etc. honestly, I can’t find a dent in anything. The very front tip of the left hand tube is slightly bent but not enough to make an issue about. And the boat is plank on nstead of sheets. Interesting. I haven’t found anything to be concerned about with the exception that I’m going to get a new transom engine mount. The wood is getting a bit spongy looking. It’s gotta go. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Vendee Globe virtual following in real time and real winds | General | |||
Vendee Globe virtual following in real time and real winds | UK Paddle | |||
Vendee Globe virtual following in real time and real winds | Whitewater | |||
Vendee Globe virtual following in real time and real winds | General | |||
Vendee Globe virtual following in real time and real winds | Power Boat Racing |